1. DL manuals
  2. Barco
  3. Projector
  4. CLM HD8 R9050130
  5. User Manual

Barco CLM HD8 R9050130 User Manual

Other manuals for CLM HD8 R9050130: User Manual

Summary of CLM HD8 R9050130

  • Page 1

    Clm hd8 user guide r9050130 r90501301 r59770057/00 16/07/2007.

  • Page 2

    Barco nv events noordlaan 5, b-8520 kuurne phone: +32 56.36.89.70 fax: +32 56.36.88.24 e-mail: sales.Events@barco.Com visit us at the web: www.Barco.Com printed in belgium.

  • Page 3

    Changes barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) desc...

  • Page 5: Table Of Contents

    Table of contents table of contents 1. Safety ................................................................................................................. 5 1.1 general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 6

    Table of contents 8.4 minimum delay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . 60 8.5 native resolution. . ...

  • Page 7

    Table of contents 12.11.4 scenergix pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 118 12.11.5 scenergix overlap zone (horizo...

  • Page 8

    Table of contents c.4 specifications clm dvi input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172 d. Troubleshooting ..........................

  • Page 9: 1. Safety

    1. Safety 1. Safety about this chapter read this chapter attentively. It contains important information to prevent personal injury while installing and using an clm hd8 projector. Furthermore, it includes several cautions to prevent damage to the clm hd8. Ensure that you understand and follow all sa...

  • Page 10

    1. Safety 1.2 important safety instructions to prevent the risk of electrical shock • this product should be operated from a mono phase ac power source. Power input voltage range must be between 100- 120/200-240v 12/8a 50/60hz • warning: this apparatus must be grounded (earthed) via the supplied 3 c...

  • Page 11

    1. Safety to prevent personal injury • caution: high pressure lamp may explode if improperly handled. Refer servicing to qualified service personnel. The customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to barco. • to prevent in...

  • Page 12

    1. Safety to prevent projector damage • if the air filters are not regularly replaced, the air flow inside the projector could be disrupted, causing overheating. Overheating may lead to the projector shutting down during operation. • in order to ensure that correct airflow is maintained, and that th...

  • Page 13

    1. Safety on servicing • do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage potentials and risk of electric shock. • refer all servicing to qualified service personnel. • fence off a restricted area of at least 3 meters around the proje...

  • Page 14

    1. Safety 1.4 important warnings concerning clm flight cases important warnings concerning stacking/transporting clm rental flight cases • stack maximum two (2) clm rental flight cases high. Never higher. • surface on which flight case is standing must be level to ensure that the total load is evenl...

  • Page 15: 2. General

    2. General 2. General about this chapter read this chapter before installing your clm hd8. It contains important information concerning installation requirements for the clm hd8, such as minimum and maximum allowed ambient temperature, humidity conditions, required safety area around the installed p...

  • Page 16

    2. General which screen type ? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applications. Screens are rated by how much light they reflect (or transmit in the case of rear projection systems) given a dete...

  • Page 17

    2. General image 2-2 5. Remove the foam rubber. Save the original shipping carton and packing material, they will be necessary if you ever have to ship your projector. For maximum protection, repack your projector as it was originally packed at the factory. A rubber foam inside a plastic bag is plac...

  • Page 18

    2. General 2.4 projector configurations the different configurations depending on the installation the projector can be mounted in different ways, the 4 different configurations are: 1. Front / table (f/t) 2. Front / ceiling (f/c) 3. Rear / table (r/t) 4. Rear / ceiling (r/c) for a ceiling mounted c...

  • Page 19

    2. General positioning the projector floor screen screen pd a cd screen sw sw sh b sh b cd image 2-5 on-axis / off-axis projection the position of the projector with reference to the screen may also be different depending on the installation. Basically the projector can be positioned in on-axis or o...

  • Page 20

    2. General u +130% -24% -90% +13.5% d l r p f u d side view p f +130% -24% top view p f l r -90% +13.5% image 2-6 shift range p dmd f field of view it’s mechanical possible to shift outside the recommended field of view, but this will result in a slightly decline of image quality depending on the us...

  • Page 21

    2. General 2.5 projector air inlets and outlets air inlets and outlets image 2-8 the clm hd8 has 2 inlet channels and one air outlet. The air outlet is located at the rear of the projector. The air inlets are located at the front and top of the projector. 2.6 free download of projector toolset about...

  • Page 22

    2. General 18 r59770057 clm hd8 16/07/2007.

  • Page 23: 3. Physical Installation

    3. Physical installation 3. Physical installation about this chapter this chapter explains how to install and set up your clm projector. If you are familiar with the projector and want to quickly set it up for temporary use, follow the “quick setup” instructions below. For a more complete setup, fol...

  • Page 24

    3. Physical installation overview • rcu battery installation • rcu rugged case installation • rcu xlr adaptor installation • using the xlr adaptor of the rcu • rcu usage possibilities 3.1.1 rcu battery installation where to find the batteries for the remote control ? The batteries are not placed in ...

  • Page 25

    3. Physical installation 3.1.2 rcu rugged case installation only with optional rugged case kit which is part of the touring kit (r9861000). Necessary tools no tools. Necessary parts touring kit how to install the rugged case of the remote control ? 1. Slide the bottom of the rcu into the rugged case...

  • Page 26

    3. Physical installation s c s image 3-6 mounting the xlr adapter 2. Fasten the two screws (s) of the xlr adaptor. Turn each screw repeatedly one or two turns until both screws are tight. 3.1.4 using the xlr adaptor of the rcu how to use the xlr adaptor of the remote control unit ? 1. Connect a cabl...

  • Page 27

    3. Physical installation a b c d f g e image 3-8 3.2 lenses overview • available lenses • lens selection • lens formulas 3.2.1 available lenses available lenses for the clm hd8 the cld lens series can be used on the clm hd8. Image 3-9 r9849870: cld zoom lens (1.2 - 1.6 : 1) image 3-10 r9861100: cld ...

  • Page 28

    3. Physical installation screen sw pd image 3-12 pd for lens selection 3.2.3 lens formulas formulas lens throw ratio for clm hd8 metric formulas (meter) inch formulas (inch) cld (1.2 - 1.6 : 1) 1.1 - 1.5 pd min =1.12 x sw - 0.05 pd max =1.53 x sw - 0.097 pd min =1.12 x sw - 1.97 pd max =1.53 x sw - ...

  • Page 29

    3. Physical installation when this is achieved, the projector is set horizontal and vertical at right angles to the screen. Sc r een sc r een image 3-14 3.4 suspension of the clm projector with rigging clamps before the projector can be suspended, the optional carry handle must be mounted on the pro...

  • Page 30

    3. Physical installation image 3-16 mount rigging points the cover plate will move down while pushing with the head but comes back to its position once the bolt is in the slot. 2. Slide a washer on the bolt and turn on a nut. 3. Measure the distance, center tube as reference, between the two used su...

  • Page 31

    3. Physical installation image 3-19 mounting rigging clamps 6. Place all four rigging clamps in open position as illustrated. Image 3-20 opening clamps 7. Place the projector (upside down) under the truss installation and lower the truss until the support bars of the truss are nearby the rigging cla...

  • Page 32

    3. Physical installation image 3-21 mounting to truss 8. Lift up the projector and hook the four rigging clamps over the support bars of the truss. 9. Lock all four rigging clamps. 10.Install the safety cable. Hook one end into a provided hole. Route the cable around the truss and hook the other end...

  • Page 33

    3. Physical installation 3.5 alignment of a ceiling mounted clm projector necessary tools spanner 17 mm how to align a ceiling mounted clm projector 1. Install the projector in the desired location. See "suspension of the clm projector with rigging clamps", page 25. Take into account the zoom range ...

  • Page 34

    3. Physical installation 30 r59770057 clm hd8 16/07/2007.

  • Page 35

    4. Stacking clm projectors 4. Stacking clm projectors stacking of clm projectors is only possible with optional touring kit. See "mounting optional carry handle", page 179 for more information. Overview • stacking clm projectors • aligning stacked clm projectors 4.1 stacking clm projectors preparati...

  • Page 36

    4. Stacking clm projectors a b c d image 4-2 close the interlocking 3. Are these projectors stacked for a ceiling mounted configuration? If yes, mount a safety cable from one side of the projector around the truss installation to the other side of the projector. Repeat this for the second projector....

  • Page 37

    4. Stacking clm projectors d c b a image 4-4 open the interlocking w arning : never open an interlocking adapter of a stacked projector which is still suspended. First place the stacked projectors on the floor. 4.2 aligning stacked clm projectors how to align two stacked clm projectors 1. Make sure ...

  • Page 38

    4. Stacking clm projectors inclination image 4-6 inclination adjustment 5. If necessary, adjust the skew of the stacked projector with respect to the reference projector by turning the screw on the right front side. Adjust until the outline of the hatch pattern is most symmetric with the reference h...

  • Page 39: 5. Connections

    5. Connections 5. Connections about this chapter this chapter describes more in detail the power (p), the input source (s) and the communication (c) connections of the clm hd8. C s p c image 5-1 overview • power connection • input source connections • communication connections 5.1 power connection c...

  • Page 40

    5. Connections s h p image 5-2 power input 4. Connect the male side of the power cord to the local power net. Caution: ensure that the power net meets the power requirements of the projector, which are: 100-120/200-240v 12/8a 50/60hz. W arning : do not attempt operation if the ac supply and cord are...

  • Page 41

    5. Connections 100 light output % 90 70 100 110 140 input voltage v max. 3 lamps on 4 lamps on 170 264 image 5-3 5.2 input source connections general the input and communication unit is equipped with two input slots, which accept any type of input designed for the clm projector. The modularity of th...

  • Page 42

    5. Connections image 5-8 cover plate for unused input slot (r848607). The clm hd8 is standard equipped with one 5 cable input module and one sdi/hdsdi input module. 5.3 communication connections communication interface 1 2 3 rs232 / 422 out rs232 / 422 in usb diagnostic code ir receiver stby / on ok...

  • Page 43

    5. Connections j rs232/422 input port k xlr input port for remote control l ir receiver m two digit 7-segment display for diagnostic code projector status the projector “status” led (a) lights up green while in operation. The same led lights up red when the projector is switched to standby. Besides ...

  • Page 44

    5. Connections rs232/422 input port rs232/422 output port pin description pin description 4 dtr : data terminal ready [rs232] txd+ : transmitted data [rs422] 4 dtr : data terminal ready [rs232] txd+ : transmitted data [rs422] 5 gnd : ground 5 gnd : ground 6 dsr : data set ready [rs232] rxd+ : receiv...

  • Page 45

    5. Connections 10/100 base-t — rj45 port pin description 1 txd+ 2 txd- 3 rxd+ 4 — 5 — 6 rxd- 7 — 8 — usb port the communication interface is equipped with a master usb port, type “a” connector (h). This usb port will simplify the service procedures for software updates or for taking backup files fro...

  • Page 46

    5. Connections 42 r59770057 clm hd8 16/07/2007.

  • Page 47: 6. Getting Started

    6. Getting started 6. Getting started about this chapter this chapter describes the functions on the remote control and local keypad and gives an overview how to start up the projector. It gives also a brief overview of the direct adjustment possible with these controls. Overview • rcu & local keypa...

  • Page 48

    6. Getting started menu exit enter pause text phase tint color brightn contr 9 0 7 8 5 6 3 4 1 2 lens lens zoom lens shift lens focus 1 22 2 3 4 5 6 7 8 9 10 11 12 13 14 17 15 16 19 20 18 i sharpn lens shift 21 1 2 3 4 5 6 7 8 9 0 menu exit enter rgb stby pause text pattern window pip lens rigging a...

  • Page 49

    6. Getting started ind. Key name description 12 lens shift shift control of the lens, to shift the lens up/down or left/right 13 picture controls use these buttons to obtain the desired picture level. 14 phase used to remove the horizontal instability of the image (usually for rgb source). It adjust...

  • Page 50

    6. Getting started starting image projection via the standby key. 1. Press stand by key once on the local keypad or on the remote control. Menu exit enter pause text phase tint color brightn contr 9 0 7 8 5 6 3 4 1 2 lens lens zoom lens shift lens focus i sharpn lens shift 1 2 3 4 5 6 7 8 9 0 menu e...

  • Page 51

    6. Getting started switching to standby. When the projector is running and you want to go to standby, press the standby key for 2 seconds. Do not press any longer on the standby key otherwise the projector will restart. All custom settings are written to the internal backup device. A message ’save d...

  • Page 52

    6. Getting started f 1 f 2 f 3 f 4 f 5 a d j e x i t e n t e r p a u s e p h a s e t e x t s h a r p n t i n t c o l o r b r i g h t n c o n t r t r e b l e b a l a n c e b a s s v o l 90 7 8 5 6 34 1 2 f1 f2 f3 f4 f5 adj ex it en t e r p a us e ph ase te xt sh arpn t i nt co lo r br ig ht n co nt r...

  • Page 53

    6. Getting started press the lens key to switch to another pattern. Different patterns are available. Quick shift adjustment 1. Press the lens key on the remote control or local keypad. The zoom/focus menu will be displayed. Image 6-7 2. Press enter. The shift menu will be displayed. Image 6-8 3. Pu...

  • Page 54

    6. Getting started 2. Press lens focus button [-] or [+] (c) for an overall focus of the image. 3. Press ▲ lens shift ▼ button for correct vertical position of the image on the screen. 4. Press ◄ lens shift ► button for correct horizontal position of the image on the screen. 6.5.3 quick picture in p...

  • Page 55

    6. Getting started the projector’s address is displayed as first item in the identification screen. Image 6-12 to continue using the rcu with that specific address, it is necessary to enter the same address with the digit buttons (address between 0 and 9) within 5 seconds after pushing the address k...

  • Page 56

    6. Getting started common address every projector has a common address ’0’ or ’1’. The choice between ’0’ and ’1’ can be selected in projector control → projector address → common address. 6.8 source selection source selection when no picture in picture is active use the digit keys on the remote con...

  • Page 57

    6. Getting started tint tint is only active for video and s-video when using the ntsc 4.43 or ntsc 3.58 system. Use the + button for more tint use the - button for less tint. Sharpness the sharpness function is used to adjust the image sharpness of video signals. Use the + button for more sharpness ...

  • Page 58

    6. Getting started 54 r59770057 clm hd8 16/07/2007.

  • Page 59

    7. Start up of the adjustment mode 7. Start up of the adjustment mode overview • about the adjustment mode • about the use of the remote control and the local keypad • start up the adjustment mode • navigation and adjustments • on screen menus versus lcd display menus 7.1 about the adjustment mode o...

  • Page 60

    7. Start up of the adjustment mode the main menu of the adjustment mode opens. Image 7-1 7.4 navigation and adjustments how to navigate in the menu structure? Once in the menu structure, use the ▲ or ▼ keys on the remote control (or the ▲ or ▼ (+ or -) key on the local keypad) to scroll through the ...

  • Page 61: 8. Input Menu

    8. Input menu 8. Input menu overview • overview flow • slot module type • input locking • minimum delay • native resolution • source switching • no signal 8.1 overview flow overview level 1 level 2 level 3 input slot module type 5-cable hd-sdi - sdi dvi input locking none automatic input 1 to 2 mini...

  • Page 62

    8. Input menu c aution : always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro- jector. 8.2.2 input configuration how to change? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select input and press enter. The input menu is displayed. 3. Use...

  • Page 63

    8. Input menu possible results. Input module indication description rgb auto rgb input. Projector searches for the sync signal and projects the correct image. Yuv auto yuv input. Projector searches for the sync signal and projects the correct image. Cvs/s-video auto video or s-video input. Projector...

  • Page 64

    8. Input menu image 8-5 image 8-6 image 8-7 when: none output is locked on an internal sync (60 hz) automatic output is locked on the selected input for the main window input 1 output is locked on source 1 input 2 output is locked on source 2 8.4 minimum delay purpose in normal mode, the processing ...

  • Page 65

    8. Input menu 8.5 native resolution what can be done the aim here is to always show the resolution of the source independently of the resolution of the dmd panels. Image 8-10 when the show native resolution function is in the on position, the projector handles the source as follows: source projected...

  • Page 66

    8. Input menu [on] : images displayed in native resolution [off] : images scaled to fill the complete screen image 8-11 image 8-12 when native resolution is on, some other menus such as aspect ratio, timings are greyed out. 8.6 source switching switching from one source to another to minimize undesi...

  • Page 67

    8. Input menu or, use the ▲ or ▼ key to scroll until the desired time is reached. Press enter to activate. Image 8-14 image 8-15 image 8-16 8.7 no signal overview • background color • shutdown setting • shutdown retarding time what can happen when no signal when no signal available, a blue or black ...

  • Page 68

    8. Input menu the input menu is displayed. 3. Use the ▲ or ▼ key to select shutdown and press enter to toggle between [on] and [off]. Image 8-20 image 8-21 image 8-22 8.7.3 shutdown retarding time only accessible when shutdown is set to [on]. How to set the retarding time? 1. Press menu to activate ...

  • Page 69: 9. Image Menu

    9. Image menu 9. Image menu overview • overview flow • how to select the image adjustments? • image settings • aspect ratio • timings • image files services • save custom settings 9.1 overview flow overview level 1 level 2 level 3 level 4 image image settings contrast brightness saturation tint phas...

  • Page 70

    9. Image menu level 1 level 2 level 3 level 4 total pixels active pixels horizontal start period total lines active lines vertical start advanced settings clamp delay clamp width field polarity image file services manual load delete delete all rename options load file save custom settings 9.2 how to...

  • Page 71

    9. Image menu 9.3 image settings overview • contrast • brightness • saturation • tint (hue) • phase • sharpness • noise reduction • color temperature • input balance 9.3.1 contrast about contrast the contrast function is used to adjust the contrast between the light and dark areas of the displayed i...

  • Page 72

    9. Image menu 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select image settings and press enter. 4. Use the ▲ or ▼ key to select brightness and press enter. The brightness progress bar appears. 5. Use ◄ or ► to change the brightness. The higher the value, the high...

  • Page 73

    9. Image menu the higher the value, the higher the color saturation. Image 9-11 image 9-12 image 9-13 image 9-14 9.3.4 tint (hue) about tint the tint function is used to adjust color hue to obtain true color reproduction and is only active for video and s-video when the ntsc color system is used. Fo...

  • Page 74

    9. Image menu the higher the value, the higher the tint. Image 9-15 image 9-16 image 9-17 image 9-18 9.3.5 phase about phase adjustment when displaying computer patterns or graphics (rgb or yuv signals) which are very detailed (tilting, vertical stripes, etc. ), jitter in picture (mis-sampling) may ...

  • Page 75

    9. Image menu image 9-20 image 9-21 image 9-22 image 9-23 9.3.6 sharpness about sharpness the sharpness function is used to adjust the image sharpness of video signals. How to change the sharpness? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the...

  • Page 76

    9. Image menu 9.3.7 noise reduction about noise reduction reduces noise and pixel jitter in all video sources. How to change? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select image settings and press enter. 4. Use the ▲ or ▼ ...

  • Page 77

    9. Image menu how to select? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select image settings and press enter. 4. Use the ▲ or ▼ key to select color temperature and press enter. 5. Use the ▲ or ▼ key to select a predefined col...

  • Page 78

    9. Image menu image 9-36 image 9-37 image 9-38 image 9-39 image 9-40 image 9-41 9.3.9 input balance overview • introduction to input balance • adjusting the input balance 9.3.9.1 introduction to input balance introduction: unbalanced color signals when transporting signals, there is always a risk of...

  • Page 79

    9. Image menu black level ∆ g ∆Β ∆ r r g b image 9-43 one can conclude here that a good color tracking can only be met by using three previously (input) balanced color signals analog digital conversion the analog color signals must pass through an analog/digital conversion circuit prior to any digit...

  • Page 80

    9. Image menu a b image 9-45 white balance : in the projector, we will set the contrast for each color until we get a 100% light output picture when projecting a 100% white image (image a) black balance : in the projector, we will set the brightness for each color until we get a 0% light output pict...

  • Page 81

    9. Image menu image 9-50 image 9-51 7. Adjust the red black level on a minimal value 8. Select black balance blue and adjust the blue black level on a minimal value. Note: this minimal value is not necessary , provided that the 2 other colors are not influencing too much the color to be adjusted, in...

  • Page 82

    9. Image menu 10.Select white balance blue and adjust the blue white level (gain) on a minimal value. Note: this minimal value is not necessary , provided that the 2 other colors are not influencing too much the color to be adjusted, in fact the aim is to minimize the effect of the two other colors ...

  • Page 83

    9. Image menu image 9-58 image 9-59 image 9-60 how to set up a custom aspect ratio? 1. Select first custom and press enter to activate. The custom aspect ratio dialog box opens. 2. Use the ▲ or ▼ key to adjust the vertical size of the image. Use the or key to adjust the horizontal size of the image....

  • Page 84

    9. Image menu the timings menu will be displayed. Image 9-63 image 9-64 image 9-65 4. To change a setting, use the ▲ or ▼ key to select and press enter. The corresponding adjustment box is displayed. E.G. Horizontal total pixels. Image 9-66 5. Use the ▲ or ▼ key (or ◄ or ► key) to change the value. ...

  • Page 85

    9. Image menu how to change the clamp delay - clamp width? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select timings and press enter. 4. Use the ▲ or ▼ key to select advanced settings and press enter. The advanced settings men...

  • Page 86

    9. Image menu image 9-75 9.6 image files services overview • files and file manipulations • manual load file • delete file • delete all custom files • rename a file • file options 9.6.1 files and file manipulations connecting a new source. Before using a new source, a correct file has to be installe...

  • Page 87

    9. Image menu the manual load window opens. Image 9-76 image 9-77 image 9-78 image 9-79 depending on the filter setup, the following is displayed: - fit: only fitting files for the selected source will be in the list - all: all files in the system will be in the list. 5. Do you want to see only the ...

  • Page 88

    9. Image menu image 9-80 image 9-81 image 9-82 image 9-83 no recovery possible ! 9.6.4 delete all custom files how to delete? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select file services and press enter. The file service me...

  • Page 89

    9. Image menu image 9-87 or, if you are not sure to delete all custom files, select no and press enter to activate the selection. 9.6.5 rename a file how to rename? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select file servic...

  • Page 90

    9. Image menu 9.6.6 file options how to set the options? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select image services and press enter. The image service menu is displayed. 4. Use the ▲ or ▼ key to select options and press ...

  • Page 91

    9. Image menu the custom settings are written to the internal backup device. A message menu “save data ...” is displayed during the save operation. Image 9-97 r59770057 clm hd8 16/07/2007 87.

  • Page 92

    9. Image menu 88 r59770057 clm hd8 16/07/2007.

  • Page 93: 10. Layout Menu

    10. Layout menu 10. Layout menu overview • overview flow • main window • pip window • layout file services 10.1 overview flow overview level 1 level 2 level 3 level 4 layout main window size position pip window pip window [on/off] size position layout file services load main full screen pip top righ...

  • Page 94

    10. Layout menu image 10-1 image 10-2 the first character is highlighted. Use the ▲ or ▼ key to select the desired character and press or key to select the next character in the name. Press exit to return. The new file is generated. 10.2.1 size adjustment what can be done? The size of the main windo...

  • Page 95

    10. Layout menu the size adjustment window opens. Image 10-4 image 10-5 image 10-6 5. Toggle with enter till lock is set to [x]. Image 10-7 [ ] = no lock between height and width. [x] = width and height are locked. 6. Use or▲ ▼ to adjust the size with respect to the original aspect ratio. When the d...

  • Page 96

    10. Layout menu the size adjustment window opens. Image 10-9 image 10-10 image 10-11 5. Toggle with enter till lock is set to [ ]. Image 10-12 [ ] = no lock between height and width. [x] = width and height are locked. 6. Use the ▲ or ▼ key to adjust the height. Use the ◄ or ► key to adjust the width...

  • Page 97

    10. Layout menu image 10-14 positioning the window how to position? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select layout and press enter. 3. Use the ▲ or ▼ key to select main window and press enter. The main window opens. 4. Use the ▲ or ▼ key to select position and press ente...

  • Page 98

    10. Layout menu 10.3 pip window overview • introduction to pip • picture in picture activation • picture in picture size of the window • picture in picture, position window 10.3.1 introduction to pip pip pip stands for "picture in picture" and allows to display multiple windows containing each of th...

  • Page 99

    10. Layout menu 5. Press exit to quit the menu. When pip is activated (on state), the pip window becomes the active window. Switching to the main window is still possible with the window button on the rcu. 10.3.3 picture in picture size of the window what can be done? The width and height of the pic...

  • Page 100

    10. Layout menu the size adjustment window opens. Image 10-26 image 10-27 image 10-28 5. Toggle with enter till lock is set to [x]]. Image 10-29 [ ] = no lock between height and width. [x] = width and height are locked. 6. Use the ▲ ▼ or ◄ ►key to adjust the size with respect to the aspect ratio. Wh...

  • Page 101

    10. Layout menu the main window opens. Image 10-31 image 10-32 image 10-33 4. Use the ▲ or ▼ key to select size and press enter. The size adjustment window opens. 5. Toggle with enter till lock is set to [ ]. Image 10-34 [ ] = no lock between height and width. [x] = width and height are locked. 6. U...

  • Page 102

    10. Layout menu the pip window opens. 4. Use the ▲ or ▼ key to select position and press enter. The size adjustment window opens. 5. Use the ▲ or ▼ key to adjust top use the ◄ or ► key to adjust left when the desired position is reached, press exit. A save window opens. Image 10-36 image 10-37 image...

  • Page 103

    10. Layout menu the load layout window opens. Image 10-41 image 10-42 image 10-43 image 10-44 5. Use the ▲ or ▼ key to select the desired layout and press enter to select. The first 3 layouts are default layouts, all others are customer created layouts. The menu shows only the first 10 layouts, but ...

  • Page 104

    10. Layout menu image 10-45 image 10-46 image 10-47 image 10-48 10.4.3 delete a layout what is possible? Custom created layouts can be removed from the projector memory. How to delete? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select window and press enter. 3. Use the ▲ or ▼ key ...

  • Page 105

    10. Layout menu the delete window opens. Image 10-49 image 10-50 image 10-51 image 10-52 the first 3 layouts are default layouts and cannot be delete. 5. Use the ▲ or ▼ key to select the layout that must be deleted. 6. Press enter to finalize the delete operation. 10.4.4 copy / save as a layout what...

  • Page 106

    10. Layout menu image 10-53 image 10-54 image 10-55 image 10-56 102 r59770057 clm hd8 16/07/2007.

  • Page 107: 11. Lamp Menu

    11. Lamp menu 11. Lamp menu overview • overview flow • lamp power mode • lamp power • lamp identification • status and run time overview lamps • lamp mode 11.1 overview flow overview level 1 level 2 level 3 level 4 lamp power mode normal economic power (reduction) identification serial number articl...

  • Page 108

    11. Lamp menu how to switch? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select lamp and press enter. 3. Use the ▲ or ▼ key to select power and press enter. 4. Use the ▲ or ▼ key to select mode. 5. Press enter to toggle between [normal] and [economic]. Image 11-1 image 11-2 image 1...

  • Page 109

    11. Lamp menu image 11-7 11.4 lamp identification about the lamp identification menu gives an overview of the most important parameters of the used lamps. It starts with the first lamp. Scrolling to other lamps is possible with the cursor keys. These parameters are: • serial number lamp • article nu...

  • Page 110

    11. Lamp menu 3. Use the ▲ or ▼ key to select overview and press enter. The status and the run time for each lamp are displayed. Image 11-11 image 11-12 image 11-13 11.6 lamp mode what can be done? The projector is equipped with 4 identical lamps. Depending on the main voltage, the lamp selection mo...

  • Page 111: 12. Alignment Menu

    12. Alignment menu 12. Alignment menu about this chapter this chapter describes the alignment of the projector once the physical installation is finished. Via the software, the image will be perfectly aligned on the screen. Overview • overview flow • orientation • lens adjustment • side keystone • b...

  • Page 112

    12. Alignment menu level 1 level 2 level 3 convergence focus full screen black full screen blue full screen green full screen red full screen white hatch outline color space projector ebu smpte custom white peaking scenergix status top bottom left right show pattern black level 12.2 orientation what...

  • Page 113

    12. Alignment menu image 12-1 image 12-2 image 12-3 for more information about the physical installation, see chapter “general”, “projector configurations”. 12.3 lens adjustment quick way to enter the lens adjustment setting; press the lens button on the local keypad or the remote control. Access to...

  • Page 114

    12. Alignment menu image 12-7 image 12-8 2. Use the ▲ or ▼ key to zoom the lens. Use the ◄ or ► key to focus the lens. 3. Press enter to go to the shift adjustments. Lens shift 1. Use the ▲ or ▼ key to select shift and press enter or when in the zoom/focus menu press enter to toggle to the shift men...

  • Page 115

    12. Alignment menu when the upper part of the image is wider than the lower part of the image, push the ◄ key. The value below the bar scale will be negative. When the upper part of the image is smaller than the lower part of the image, push the ► key. The value below the bar scale will be positive....

  • Page 116

    12. Alignment menu the reset function brings all blanking settings back to zero. How to adjust the blanking? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select alignment and press enter. 3. Use the ▲ or ▼ key to select blanking and press enter. 4. Use the ▲ or ▼ key to select the d...

  • Page 117

    12. Alignment menu image 12-19 image 12-20 image 12-21 12.7 gamma about gamma gamma is an image quality enhancement function that offers a richer image by brightening the already darker portions of the image without altering the brightness of the brighter portions (contrast feeling enhanced). How to...

  • Page 118

    12. Alignment menu 4. Use the ▲ or ▼ key to scroll through the possible selection and press enter to activate the selected pattern. Select ▲ or ▼ in the menu to display the previous or next page with possible internal patterns. Image 12-25 image 12-26 image 12-27 the selected pattern is displayed. T...

  • Page 119

    12. Alignment menu projector maximum color space ebu european broadcasting union. This organization defines a european standard. Smpte american standard. Custom the user can define the x and y coordinates for red, green and blue which forms the corners of the color space. By changing the coordinates...

  • Page 120

    12. Alignment menu white peaking can be set between 0 and 10. The default value is 10. With 0, no white peaking, spokes not used to enhance the secondary colors and 10, full white peaking, spokes are fully used to enhance the secondary colors to show a truly life-like image. Image 12-32 image 12-33 ...

  • Page 121

    12. Alignment menu adjustable overlapping area 50% 100% 50% 100% image 2 image 1 image 2 image 1 light output per image total composite light output image 12-36 scenergix basic principle 12.11.2 preparations scenergix preparations to ensure proper scenergix adjustment, be sure that the following adj...

  • Page 122

    12. Alignment menu 12.11.4 scenergix pattern what can be done? To make the scenergix adjustment more easy, an internal pattern can be displayed. How to display or remove the pattern? 1. Use the ▲ or ▼ key to select show pattern and press enter. The internal scenergix pattern is displayed. Image 12-4...

  • Page 123

    12. Alignment menu 12.11.5 scenergix overlap zone (horizontal scenergix) definitions image 12-43 scenergix set up overlap : number of pixels that overlap horizontal resolution of 1 projector : 1024 for graphics versions, 1280 for reality versions, 1400 for sxga projectors. Total horizontal screen re...

  • Page 124

    12. Alignment menu image 12-47 image 12-48 image 12-49 2. Enter value for horizontal active as follows : horz. Active= [(horz. Resolution of 1 projector)/(total horz. Screen resolution)] x (horz. Resolution source) 3. Horizontal start = original start + [(horz. Resolution source) minus (newly calcul...

  • Page 125

    12. Alignment menu image 12-51 image 12-52 image 12-53 2. Enter value for vertical active (= lact) as follows : lact = [(vert.. Resolution of 1 projector)/(total vert. Screen resolution)] x (vert. Resolution source) 3. Vertical start (= lstart) remains the same. Adjustment of active lines (lact) of ...

  • Page 126

    12. Alignment menu the scenergix menu items are only accessible when status is [on]. How to set the blending zone? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select alignment and press enter. 3. Use the ▲ or ▼ key to select scenergix and press enter. 4. Use the ▲ or ▼ key to selec...

  • Page 127

    12. Alignment menu image 12-61 width set up for projector 1 image 12-62 width set up for projector 2 12.11.8 adjusting the black level of the images why black level adjustment for dark images, the overlap zone will be brighter then the rest of the images. Therefore we can rise the black level of the...

  • Page 128

    12. Alignment menu image 12-63 image 12-64 image 12-65 5. Adjust the black level of area a until the black level of area a, b and c are equal. A c b 12 13 11 r g b rgb image 1 image 2 image 12-66 black level adjustment use the reset function to bring all scenergix settings back to zero. 124 r5977005...

  • Page 129: 13. Projector Control

    13. Projector control 13. Projector control about this chapter this chapter explains the setup of the control part of the software such as projector address and all types of communication with the external world. Overview • overview flow • projector address • serial communication • network • ir cont...

  • Page 130

    13. Projector control level 1 level 2 level 3 auto [auto image menu] overtemp dmd safety [on] menu position menu [center] bar scale [bottom] local lcd contrast 13.2 projector address overview • individual projector address • common address 13.2.1 individual projector address about individual project...

  • Page 131

    13. Projector control image 13-4 13.2.2 common address about common address a common address can be ’0’ or ’1’. Any command coming from a remote control programmed with that common address will be executed. How to change the common address? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key ...

  • Page 132

    13. Projector control 13.3.1 baud rate setup what can be done? The baudrate for a serial connection with a computer can be set up. How to set up? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select projector control and press enter. 3. Use the ▲ or ▼ key to select serial communicati...

  • Page 133

    13. Projector control default: [rs232] image 13-12 image 13-13 image 13-14 13.3.3 rs422 termination what can be done? When the interface standard is set to rs422, the last projector in a line should be rs422 terminated (on position). All others in the line should be in the off position. How to set 1...

  • Page 134

    13. Projector control 13.4.1 introduction to a network connection dhcp dynamic host configuration protocol. Dhcp is a communications protocol that lets network administrators manage centrally and automate the assignment of ip addresses in an organization’s network. Using the internet protocol, each ...

  • Page 135

    13. Projector control [on] = dhcp is activated. Automatic assigning of an address is activated. [off ] = dhcp is deactivated. A fixed address will be used. Image 13-18 image 13-19 image 13-20 13.4.3 ip-address set up how to set up? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select...

  • Page 136

    13. Projector control 13.4.4 subnet-mask set up how to set up? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select projector control and press enter. 3. Use the ▲ or ▼ key to select network and press enter. The ethernet menu opens. 4. Use the ▲ or ▼ key to select subnet mask and pre...

  • Page 137

    13. Projector control or, enter the value with the digit keys on the remote control or local keypad. The next digit in the address will be selected automati- cally. Note: this must not be 0.0.0.0 image 13-29 image 13-30 image 13-31 image 13-32 6. Press exit to return. 13.5 ir control switching what ...

  • Page 138

    13. Projector control 13.6 dmx overview • dmx address • dmx monitor while the local lcd display on the clm is active (backlight is on), the dmx response time may increase. 13.6.1 dmx address how to set the dmx address 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select projector con...

  • Page 139

    13. Projector control the dmx monitor window opens. Image 13-40 image 13-41 image 13-42 image 13-43 when selecting dmx monitor and no dmx device is connected, the message “no dmx data, check connection to display channels” appears on the screen. When enter is pressed the same window appears as dmx m...

  • Page 140

    13. Projector control 64 - 95 zoom 96 - 127 horizontal shift 128 - 255 vertical shift 13.7 buttons functionality some buttons on the rcu or local keypad can have a different functionality depending on the need of the projector owner. Overview • standby button • auto button • over temperature dmd saf...

  • Page 141

    13. Projector control 3. Use the ▲ or ▼ key to select buttons and press enter. 4. Use the ▲ or ▼ key to select auto and press enter to toggle between [align only] and [auto-image menu]. Image 13-47 image 13-48 image 13-49 13.7.3 over temperature dmd safety what can be done when the temperature of th...

  • Page 142

    13. Projector control both can be positioned : • center • top • bottom how to change the position? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select projector control and press enter. 3. Use the ▲ or ▼ key to select menu position and press enter. The menu position window opens 4. ...

  • Page 143: 14. Service Menu

    14. Service menu 14. Service menu about this chapter this chapter refers to the service menu in which the owner can find valuable information when calling the barco help desk. Overview • overview flow • identification • diagnosis • internal service patterns • restore factory defaults • save custom s...

  • Page 144

    14. Service menu the following items will be displayed: • projector address • type of projector • package • configuration • baud rate • ip address • mac address • text • serial number of projector: this number can be useful when calling for technical assistance. • runtime • lamp runtime • customer i...

  • Page 145

    14. Service menu 14.3 diagnosis what can be seen? The diagnosis menu gives the possibility to get an overview of the working of the projector. 14.3.1 how to start up the diagnosis? Start up 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select service and press enter. The service wind...

  • Page 146

    14. Service menu the versions overview is displayed. Image 14-8 image 14-9 image 14-10 image 14-11 use the ▲ or ▼ item in the menu to select the previous or next page with information. 14.3.3 voltages how to display an overview? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select se...

  • Page 147

    14. Service menu the voltage overview menu will be displayed. Image 14-12 image 14-13 image 14-14 image 14-15 use the ▲ or ▼ item in the menu to select the previous or next page with information. 14.3.4 i²c diagnosis how to select? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select...

  • Page 148

    14. Service menu the i²c diagnosis overview is displayed. Image 14-16 image 14-17 image 14-18 image 14-19 14.3.5 temperatures how to get an overview? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select service and press enter. The service window opens. 3. Use the ▲ or ▼ key to selec...

  • Page 149

    14. Service menu the temperature overview menu will be displayed. Image 14-20 image 14-21 image 14-22 image 14-23 use the ▲ or ▼ item in the menu to select the previous or next page with information. 14.3.6 fan speeds overview how to get an overview? 1. Press menu to activate the menus. 2. Use the ▲...

  • Page 150

    14. Service menu the fan speeds overview menu will be displayed. Image 14-24 image 14-25 image 14-26 image 14-27 use the ▲ or ▼ item in the menu to select the previous or next page with information. 14.3.7 error logging overview how to get an overview? 1. Press menu to activate the menus. 2. Use the...

  • Page 151

    14. Service menu the error logging overview menu is displayed. For more explanation about the stored error message, see "error codes", page 173. Image 14-28 image 14-29 image 14-30 14.4 internal service patterns how to select 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select servi...

  • Page 152

    14. Service menu 3. Use the ▲ or ▼ key to select restore factory defaults and press enter. The factory defaults confirmation window opens. 4. Use the ▲ or ▼ key to select yes or no and press enter. If you are sure to restore the factory defaults and to erase the custom settings, select yes. If you a...

  • Page 153: 15. Maintenance

    15. Maintenance 15. Maintenance about this chapter this chapter contains detailed maintenance procedures like lens cleaning, etc. These procedures can easily be performed by the operator of the projector. Overview • cleaning the lens • cleaning the exterior of the projector 15.1 cleaning the lens to...

  • Page 154

    15. Maintenance 150 r59770057 clm hd8 16/07/2007.

  • Page 155: 16. Servicing

    16. Servicing 16. Servicing about this chapter this chapter contains general servicing procedures like lamp replacement, input unit replacement etc. Note that some of these procedures may only be performed by qualified technical service personnel. These procedure are marked with a warning. Extra ser...

  • Page 156

    16. Servicing a b image 16-1 filter top replacement 4. Insert a new hepa filter first with the side next to the lamp housing and pull down the other side to lock the filter. 5. Reinstall the lamp door, see "installation of the lamp door", page 164. C aution : never install a used hepa filter. Always...

  • Page 157

    16. Servicing a b c image 16-2 front filter replacement 4. Insert a new hepa filter by pulling the spring clamp away and insert the filter into its position. Release the spring clamp. 5. Reinstall the front cover of the projector, see "installation of the front cover", page 163. C aution : never ins...

  • Page 158

    16. Servicing b c a image 16-3 mounting the lens 4. Insert the lens in such a way that the female jack (c) is in front of the male jack (upper left corner) (b) and ensure the lens touches the front plate of the lens holder. Caution: do not release the lens yet, as the lens may fall out of the lens h...

  • Page 159

    16. Servicing a image 16-5 slide out lens 16.5 removal of a lamp unit w arning : this procedure may only be performed by qualified technical service personnel. C aution : never attempt to disassemble the lamp from its housing or to dispose of it. Due to its high internal pressure, the lamp may explo...

  • Page 160

    16. Servicing mercury vapor warnings: the lamp used in the projector contains mercury. In case of a lamp rupture, explosion there will be a mercury vapor emission. In order to minimize the potential risk of inhaling mercury vapors: • ensure the projector is installed only in ventilated rooms. • repl...

  • Page 161

    16. Servicing image 16-9 take out the lamp for recycling guidelines of the lamp, see "recycling guidelines", page 9. 16.6 mounting a new lamp unit about the lamp units all four lamp units are equal. A spare lamp can be inserted in any position without problems. See "order info", page 185 for the ord...

  • Page 162

    16. Servicing image 16-10 lamp insertion 2. Rotate the fixation handle and close it. Push till it clicks. 3. Insert the cable connector into lamp unit socket. 16.7 removal of an input module necessary tools phillips screw driver ph1 how to remove an input module 1. Switch off the projector and unplu...

  • Page 163

    16. Servicing c aution : ensure that an unused slot is always covered with a dummy front plate. Immediately install after removing an input module a new input module or a dummy front cover. 16.8 inserting an input module necessary tools phillips screw driver ph1 how to insert an input module 1. Ensu...

  • Page 164

    16. Servicing 160 r59770057 clm hd8 16/07/2007.

  • Page 165: Installation

    17. Projector covers, removal and installation 17. Projector covers, removal and installation overview • removal of the front cover • removal of the lamp door • installation of the front cover • installation of the lamp door w arning : the cover removal procedures may only be performed by qualified ...

  • Page 166

    17. Projector covers, removal and installation b c image 17-2 remove the front cover 17.2 removal of the lamp door w arning : this procedure may only be performed by qualified technical service personnel. Necessary tools flat screwdriver how to remove the lamp door 1. Release the captive screw at th...

  • Page 167

    17. Projector covers, removal and installation image 17-4 remove lamp door 17.3 installation of the front cover front cover can only be installed after that the side covers and top cover are installed. Necessary tools flat screwdriver how to install the front cover 1. Insert the top of the front cov...

  • Page 168

    17. Projector covers, removal and installation c image 17-6 secure front cover 17.4 installation of the lamp door lamp door can only be installed when the top cover is installed. Necessary tools flat screwdriver how to install the lamp door 1. Place the lamp door with its pins (b) on its sockets (a)...

  • Page 169: A. Dimensions

    A. Dimensions a. Dimensions overview • dimensions of the clm hd8 a.1 dimensions of the clm hd8 dimensions without carry handle 691.18 4 4 2. 0 3 2 9 3. 2 6 image a-1 dimensions r59770057 clm hd8 16/07/2007 165.

  • Page 170

    A. Dimensions dimensions with optional carry handle 3 9 2 .5 5 5 1 5 2 5 7 .5 2 5 7 .5 775 532 145.5 97.5 3 0 5 1 0 5 1 0 5 image a-2 166 r59770057 clm hd8 16/07/2007.

  • Page 171: B. Standard Source Files

    B. Standard source files b. Standard source files b.1 table overview table overview the following standard image files are pre-programmed in the projector. Name 1 fvert hz 2 fhor khz 3 fpix mhz 4 ptot 5 pact 6 ltot 7 lact 8 640x350@85 85,079 37,860 31,500 832 640 445 350 640x400@85 85,079 37,860 31,...

  • Page 172

    B. Standard source files name 1 fvert hz 2 fhor khz 3 fpix mhz 4 ptot 5 pact 6 ltot 7 lact 8 1280x1024@85 85,027 91,149 157,506 1728 1280 1072 1024 1360x768@60 59,898 47,619 85,333 1792 1360 795 768 1400x1050@50 50,015 54,517 94,641 1736 1400 1090 1050 1400x1050@60 59,979 65,317 121,751 1864 1400 10...

  • Page 173: C. Specifications

    C. Specifications c. Specifications overview • specifications clm hd8 • specifications clm 5 cable input (multi purpose) • specifications clm hdsdi – sdi input • specifications clm dvi input c.1 specifications clm hd8 overview light output 8.000 center lumen resolution 1920 x 1080 (full hd) contrast...

  • Page 174

    C. Specifications c.2 specifications clm 5 cable input (multi purpose) front view 5 cable input sycn ok sel 5-cable input r/p r g/y/video b/p b h/s v/c r image c-1 signal connectivity input signal r / p r g / y / video b / p b h / s v / c r rgbhv r g b h v rgbs r g b s composite sync or video as syn...

  • Page 175

    C. Specifications specifications • data and hd sources rgb and yuv [hs/vs, cs or sog(y)]: - pixel clock maximum 275 mhz - 8 bit digital output • video sources cvbs, s-video, rgb and yuv [cs, cv or sog(y)]: - pal b/d/i/g/h, pal60, pal m, pal n, pal nc - ntsc m/j, ntsc 4.43 - secam b/d/g/k/l - 525i, 6...

  • Page 176

    C. Specifications specifications • sd smpte 259m-c and hd smpte 292m input data • 2 inputs (bnc), 1 active loop-through output (bnc) of selected input • automatic selection of active input with manual override • 10 bit digital output • diagnostic led’s on front panel: - green led: lights up in case ...

  • Page 177: D. Troubleshooting

    D. Troubleshooting d. Troubleshooting d.1 error codes overview when the error code is preceded by a ’-’ sign, then the error means a real error for the projector. When the error code is preceded by a ’+’ sign, then the error code means a warning. The projector does not fail yet, but take care for th...

  • Page 178

    D. Troubleshooting error code description error warn- ing caused by action 2005 lamp stop failed yes - call qualified service engineer 2100 lps 1 error yes - replace lps 2400 lps 2 error yes - replace lps 2700 lps 3 error yes - replace lps 3000 lps 4 error yes - replace lps 3899 spi flash invalid ty...

  • Page 179

    D. Troubleshooting error code description error warn- ing caused by action 7986 lps4 temp high yes yes high temperature on lps4 check if air slots are free, clean air filters. If problem persists, call a qualified service engineer. 7984 lamp1 temp high yes yes high temperature on lamp 1 check if air...

  • Page 180

    D. Troubleshooting error code description error warn- ing caused by action 7909 fan lps b high - yes 7908 fan inlet a low yes yes fan is running too slow or not at all if problem persists, call a qualified service engineer 7907 fan inlet a high - yes 7906 fan inlet b low yes yes fan is running too s...

  • Page 181

    D. Troubleshooting error code description error warn- ing caused by action 7885 fan lamp 4 front high - yes 7884 pump speed low yes yes bad or no water flow in the cooling circuit if problem persists, call a qualified service engineer 7883 pump speed high - yes 7878 overtemp yes yes extreme overhead...

  • Page 182

    D. Troubleshooting error code description error warn- ing caused by action 27995 osd out of pos. Yes call a qualified service engineer 27994 osd fifo full yes call a qualified service engineer 178 r59770057 clm hd8 16/07/2007.

  • Page 183

    E. Mounting optional carry handle e. Mounting optional carry handle about this chapter this chapter describes the procedures to mount the optional carry handle to clm projector. When this optional carry handle is mounted, the projector can be suspended with the rigging clamps and stacking of project...

  • Page 184

    E. Mounting optional carry handle image e-2 stacking points mounted e.2 preparing the new carry handle what has to be done? The back stacking point must be removed before the carry handle can be mounted on the clm projector. The fixation hole for the fixation bolt of the carry handle is covered by t...

  • Page 185

    E. Mounting optional carry handle e.3 preparing the projector c aution : before turning the projector upside down, be sure the stacking points on the top cover are mounted. What has to be done? Before the carry handle can be mounted, the projector feet must be removed and an extra support point must...

  • Page 186

    E. Mounting optional carry handle e.4 mounting the carry handle how to mount the carry handle 1. Place the handle on to the projector. 2. Insert a spacer (a) in the back fixation hole so that a small rotation of the carry handle is still possible. 3. Insert a bolt into each fixation hole and secure ...

  • Page 187

    E. Mounting optional carry handle image e-7 mounting stacking foot r59770057 clm hd8 16/07/2007 183.

  • Page 188

    E. Mounting optional carry handle 184 r59770057 clm hd8 16/07/2007.

  • Page 189: F. Order Info

    F. Order info f. Order info f.1 spare part order info order info: order info description r9854430 5 cable input module r9854450 hdsdi - sdi input module r9854460 dvi input module r848607 cover plate for unused input slot r98610206 clm dust filter kit, 6 pack r986102012 clm dust filter kit, 12 pack r...

  • Page 190

    F. Order info 186 r59770057 clm hd8 16/07/2007.

  • Page 191: Glossary

    Glossary glossary color space a color space or color standard is a mathematical representation for a color. For example the rgb color space is based on a cartesian coordinate system. Common address projector will always execute the command coming from a rcu programmed with that common address. Defau...

  • Page 192

    Glossary subnet mask a number that is used to identify a subnetwork so that ip addresses can be shared on a local area network. 188 r59770057 clm hd8 16/07/2007.

  • Page 193: Index

    Index index a adjustment 48–50 quick set up 48–50 lens 48 lens functions 49 lens key 48 pip 50 adjustment mode 55–56 about 55 lcd display menus 56 local keypad 55 navigation 56 on screen menus 56 rcu 55 start up 55 alignment 107–121, 123, 125 blanking 111 color space 114 color standard 114 gamma 113...

  • Page 194

    Index projector address 50 quick setup 48 source selection 52 terminology overview 43 getting started 43, 45, 47, 52 controlling the projector 52 rcu & local keypad 43 switching on 45 using the rcu 47 guidelines 9 recycling 9 lamp 9 h hue 69 i identification 105 lamp 105 image 65–72, 74–75, 78–80, 8...

  • Page 195

    Index position 92 size 90 overview flow 89 pip 94–95, 97 activation 94 position 97 size 95 rename 99 save as 101 lcd display menus 56 lens 109, 149 cleaning 149 focus 109 shift 109 zoom 109 lens adjustment 109 lens formulas 24 lens installation 153 lens removal 154 lens selection 23 lenses 23–24, 15...

  • Page 196

    Index recycling 9 remote control 20–21, 39 battery 20 rugged case 21 remote control 49–50 lens functions 49 pip 50 remove 161–162 front cover 161 lamp door 162 rename 99 layout 99 restore factory defaults 147 rs232 39 rs422 39 s safety 5–10, 20 battery explosion 8, 20 cooling liquid circuit 7 electr...

  • Page 197

    Revision sheet to: barco nv events/documentation noordlaan 5, b-8520 kuurne phone: +32 56.36.89.70, fax: +32 56.36.88.24 e-mail: service.Mne@barco.Com, web: www.Barco.Com from: date: please correct the following points in this documentation (r59770057/00): page wrong correct r59770057 clm hd8 16/07/...