Date: 03/06/98 page 1 installation guidelines r9827341 r9827342 cm 100 art no : r5975693 rev-06 2 3 1 2 3 1 r9827341 ceiling support with pulley r9827342 ceiling support without pulley how to mount the ceiling support to the ceiling is for both products the same. For the support without pulley, skip...
Date: 03/06/98 page 2 installation guidelines r9827341 r9827342 cm 100 warning the ceiling should be capable of support- ing a weight of at least 800kg (1765 lbs). If it cannot, the ceiling must be reinforced. Improper installation may result in serious personal injury. Warning this support is provi...
Date: 03/06/98 page 3 installation guidelines r9827341 r9827342 cm 100 lower support projector lowered ceiling cord support upper support screwed rods.
Date: 03/06/98 page 4 installation guidelines r9827341 r9827342 cm 100 contents installation guidelilnes 1. Mounting instructions for the upper support to the ceiling.(fig. 1) a. Position of the upper support on the ceiling. B. Mounting of the 4 screwed rods on the upper support. 2. Projector placem...
Date: 03/06/98 page 5 installation guidelines r9827341 r9827342 cm 100 instructions for ceiling mounting support caution: this support is designed for use only with the barco 801, 808, 1000, 1100, 1200, 1208, 1209, 1500, 1600, 5000, 5100, 8000 and 8100 series projectors. Use with other appliances ma...
Date: 03/06/98 page 6 installation guidelines r9827341 r9827342 cm 100 fixation of upper support to the ceiling fixation procedure in case of a flat solid ceiling the metallic bridge, welded in the centre of the upport support, could be helpfull in the following way: - attach the upper support, fron...
Date: 03/06/98 page 7 installation guidelines r9827341 r9827342 cm 100 2. Projector placement on lower support and adjustment controls a. Projector placement on lower support (refer to fig. 3) - place the projector on a table on rollers, projector cover faced to the table or place the projector in t...
Date: 03/06/98 page 8 installation guidelines r9827341 r9827342 cm 100 4. Lifting up and fixation of the lower support (with projector) on the screwed rods. Safety precautions: - standing under the lifted projector is strictly forbidden for everybody. - the person, pulling on the cord, should watch ...
Date: 03/06/98 page 9 installation guidelines r9827341 r9827342 cm 100 5. Projector-position correction a. Projector water-level adjustment unscrew the nuts 1on each rod and turn the screws 5cm above the lower support. Warning: be aware that for the water-level adjustment the used nuts remain screwe...
Date: 03/06/98 page 10 installation guidelines r9827341 r9827342 cm 100 b. Projector axis adjustment the projector axis has to be perpendicular to the screen in order to obtain for the projected picture of the outside picture tubes sharp focussing left-right. If the projector axis is not perpendicul...
Date: 03/06/98 page 11 installation guidelines r9827341 r9827342 cm 100 c . Projector movement forward or backward when adjusting the projector, it may happen that the projector must be located a few closer or further from the screen in order to able to adjust the picture correctly. The mounting kit...
Date: 03/06/98 page 12 installation guidelines r9827341 r9827342 cm 100 lay-out upper support.
Date: 03/06/98 page 13 installation guidelines r9827341 r9827342 cm 100 &25'6833257 )52172)833(5 6833257 &(17(5833(5 6833257 fig. 2 fig. 3 ( '.
Date: 03/06/98 page 14 installation guidelines r9827341 r9827342 cm 100 fig. 3 ) $ %.
Date: 03/06/98 page 15 installation guidelines r9827341 r9827342 cm 100 fig. 4.
Date: 03/06/98 page 16 installation guidelines r9827341 r9827342 cm 100 fig. 5 &(17(5xsshuvxssruw 0$;/(1*+7&0 3' ',67$1&(6&5((1)5217 833(56833257 3'pp 2 3 1.
Date: 03/06/98 page 17 installation guidelines r9827341 r9827342 cm 100 fig. 6.
Date: 03/06/98 page 18 installation guidelines r9827341 r9827342 cm 100 mounting holes mounting holes mounting holes mounting holes mounting holes mounting holes figure 7. Mounting of the security chain projectors 801-projector 808-projector 1000-series projector screw washer washer chain nut plate ...
Date: 03/06/98 page 19 installation guidelines r9827341 r9827342 cm 100 figure 8. Drilling the four holes for chain mounting drill four holes of diameter 6.5mm (0.256") 12mm (0.472") 12mm (0.472") 12mm (0.472") 6hulhvsurmhfwru 6hulhvsurmhfwru.
