1. DL manuals
  2. Barco
  3. Projector
  4. DATA 2100 R9001070
  5. Owner's Manual

Barco DATA 2100 R9001070 Owner's Manual

Summary of DATA 2100 R9001070

  • Page 1

    Owner's manual data 2100 r9001070 art. No. :r5975696 date: 140798 barco projection systems owner's manual data 2100 r9001070 art. No. :r5975696 date: 140798 barco projection systems rev. : 04 rev. : 04.

  • Page 2

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, july 1998 all rights reserved. Trademarks are the rights of their respective owners. Printed in belgium due to constant research, the information in this manual is subject to change wi...

  • Page 3

    Table of contents 5975696 barcodata 2100 140798 1-1 table of contents 5975696 barcodata 2100 140798 1-1 warnings & safety instructions ............................................................................................................................................. 1-1 avertissements & pr...

  • Page 4

    Table of contents 1-2 5975696 barcodata 2100 140798 table of contents 1-2 5975696 barcodata 2100 140798 installation set up ...................................................................................................................................................................... 4-1 locat...

  • Page 5

    Table of contents 5975696 barcodata 2100 140798 1-3 table of contents 5975696 barcodata 2100 140798 1-3 picture controls with direct access. .......................................................................................................................................... 8-4 sound controls w...

  • Page 6

    Table of contents 1-4 5975696 barcodata 2100 140798 table of contents 1-4 5975696 barcodata 2100 140798 installation ................................................................................................................................................................................. 11-1 ...

  • Page 7

    Table of contents 5975696 barcodata 2100 140798 1-5 table of contents 5975696 barcodata 2100 140798 1-5 appendix d : lens cleaning procedure ............................................................................................................................................. D-1 appendix e : ...

  • Page 8

    Safety instructions 5975696 barcodata 2100 140798 1-1 safety instructions 5975696 barcodata 2100 140798 1-1 warnings avertissements safety instructions prescriptions de sécurité on safety sécurité on installation installation on servicing entretien et réparation on cleaning nettoyage on repacking re...

  • Page 9

    Presciptions de sécurité 1-2 5975696 barcodata 2100 140798 presciptions de sécurité 1-2 5975696 barcodata 2100 140798 remarque sur la sécurité les projecteurs sont fabriqués conformément aux exigences des normes de sécurité internationales en60950, ul 1950 et csa c22.2 no. 950. Ces normes de sécurit...

  • Page 10

    Safety instructions 5975696 barcodata 2100 140798 1-3 safety instructions 5975696 barcodata 2100 140798 1-3 notice on safety projectors are built in accordance with the requirements of the international safety standards en60950, ul 1950 and csa c22.2 no. 950, which are the safety standards of inform...

  • Page 11

    Presciptions de sécurité 1-4 5975696 barcodata 2100 140798 presciptions de sécurité 1-4 5975696 barcodata 2100 140798 risque d'electro- cution ne pas ouvrir attention attention : afin de reduire le risque de chocs electriques, ne pas enlever le couvercle (ou le dos) il n'y a pas de pieces reparables...

  • Page 12

    Safety instructions 5975696 barcodata 2100 140798 1-5 safety instructions 5975696 barcodata 2100 140798 1-5 the lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product are risk of electrical shock to persons. The exclamation point within a tria...

  • Page 13

    Presciptions de sécurité 1-6 5975696 barcodata 2100 140798 presciptions de sécurité 1-6 5975696 barcodata 2100 140798 instructions pour l’utilisateur : si cet équipement cause des interférences de radio ou de télévision, l’utilisateur peut essayer de corriger les interférences en appliquant une ou p...

  • Page 14

    Safety instructions 5975696 barcodata 2100 140798 1-7 safety instructions 5975696 barcodata 2100 140798 1-7 instructions to the user : if this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following measures : -...

  • Page 15

    Presciptions de sécurité 1-8 5975696 barcodata 2100 140798 presciptions de sécurité 1-8 5975696 barcodata 2100 140798 * pour débrancher le cordon, le tirer par le connecteur, jamais par le cordon lui-même. * si on utilise une rallonge, vérifier que le total des courants des appareils raccordés à cet...

  • Page 16

    Safety instructions 5975696 barcodata 2100 140798 1-9 safety instructions 5975696 barcodata 2100 140798 1-9 * do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. * to disconnect the cord, pull it out by the plug. Never pull the cord itself...

  • Page 17

    Presciptions de sécurité 1-10 5975696 barcodata 2100 140798 presciptions de sécurité 1-10 5975696 barcodata 2100 140798 contacter le service technique qualifié dans les cas suivants : - si le cordon secteur ou la prise de courant est endommagé ou effiloché. - si on a répandu du liquide dans le proje...

  • Page 18

    Safety instructions 5975696 barcodata 2100 140798 1-11 safety instructions 5975696 barcodata 2100 140798 1-11 risk of electric shock! Refer all projector service to a qualified barco service center. Call for service in the following conditions : - when the power cord or plug is damaged or frayed. - ...

  • Page 19

    Presciptions de sécurité 1-12 5975696 barcodata 2100 140798 presciptions de sécurité 1-12 5975696 barcodata 2100 140798 eclairage pour garantir la meilleure qualité possible de l’image projetée, il est essentiel que l’éclairage ambiant incident sur l’écran soit réduit au strict minimum. Lors de l’in...

  • Page 20

    Safety instructions 5975696 barcodata 2100 140798 1-13 safety instructions 5975696 barcodata 2100 140798 1-13 in handy if you ever have to ship your projector. For maximum protection, repack your set as it was originally packed at the factory. On illumination in order to obtain the best quality for ...

  • Page 21

    Unpacking & dimensions 5975696 barcodata 2100 140798 unpacking & dimensions 5975696 barcodata 2100 140798 2-1 2-1 unpacking dimensions battery installation on the rcu unpacking dimensions battery installation on the rcu.

  • Page 22

    Unpacking & dimensions 2-2 5975696 barcodata 2100 140798 unpacking & dimensions 2-2 5975696 barcodata 2100 140798 unpacking to open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the projector is...

  • Page 23

    Unpacking & dimensions 5975696 barcodata 2100 140798 unpacking & dimensions 5975696 barcodata 2100 140798 2-3 2-3 projector dimensions (units : mm) 641.5 405 200.5 63 33 5 22 4 14 1 55 35 141 .2 20 25 0 22 0 278 127 5 194.9 603 225 245 67.5 projector dimensions (units : mm) 641.5 405 200.5 63 335 22...

  • Page 24

    Unpacking & dimensions 2-4 5975696 barcodata 2100 140798 unpacking & dimensions 2-4 5975696 barcodata 2100 140798 310a.Drw battery installation in the rcu. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. Before using the rcu, start...

  • Page 25

    Installation guidelines 5975696 barcodata 2100 140798 3-1 installation guidelines 3-1 5975696 barcodata 2100 140798 installation guidelines environment what about ambient light? Which screen type? What image size? How big should the image be? Where to install the projector? How to install the projec...

  • Page 26

    Installation guidelines 3-2 5975696 barcodata 2100 140798 installation guidelines 5975696 barcodata 2100 140798 3-2 installation guidelines careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the project...

  • Page 27

    Installation guidelines 5975696 barcodata 2100 140798 3-3 installation guidelines 3-3 5975696 barcodata 2100 140798 * which screen type? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applications. Screens ...

  • Page 28

    Installation guidelines 3-4 5975696 barcodata 2100 140798 installation guidelines 5975696 barcodata 2100 140798 3-4 * where to install the projector? Definitions of the abbreviation on drawings b = distance between ceiling and top of the screen or between floor and bottom of the screen. A = correcti...

  • Page 29

    Installation guidelines 5975696 barcodata 2100 140798 3-5 installation guidelines 3-5 5975696 barcodata 2100 140798 table mounting of the barcodata 2100 (70% off-axis projection) ceiling mounting of the barcodata 2100 (70% off-axis projection) screen pd b ceiling projector cd a cd = b + (sw x 0.225)...

  • Page 30

    Installation guidelines 3-6 5975696 barcodata 2100 140798 installation guidelines 5975696 barcodata 2100 140798 3-6 ice technician. * how to install a projection lens? The barcodata 2100 is supplied without any lens. The following lens is available : sd(1.2:1) - video sd(1.2:1) sd(1.7:1) how to inst...

  • Page 31

    Installation guidelines 5975696 barcodata 2100 140798 3-7 installation guidelines 3-7 5975696 barcodata 2100 140798 always use the barco ceiling support to attach your barcodata 2100 to the ceiling. The installation instruction for this support is enclosed in the packet of the set. Note : a ceiling ...

  • Page 32

    Installation set up installation set up 5975696 barcodata 2100 140798 4-1 4-1 5975696 barcodata 2100 140798 installation set up projector configuration installation set up projector configuration.

  • Page 33

    Installation set up 4-2 installation set up 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 4-2 the barcodata 2100 can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. 5hdu7deoh 5hdu&hlolqj )urqw7deoh )urqw&hlolqj ...

  • Page 34

    Installation set up installation set up 5975696 barcodata 2100 140798 4-3 4-3 5975696 barcodata 2100 140798 to change the configuration, enter the adjustment mode by pushing adjust or enter . Highlight installation by pushing the control disk up or down and press enter to select. The installation me...

  • Page 35

    Location and functions of control 5975696 barcodata 2100 140798 5-1 location and functions of control 5975696 barcodata 2100 140798 5-1 location and function of controls front panel terminology local keypad remote control location and function of controls front panel terminology local keypad remote ...

  • Page 36

    Location and functions of control 5-2 location and functions of control 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 5-2 front panel terminology 0 i source 1 source 4 source 5 source 2 source 3 audio out audio in c audio in b audio in a video video s video rgbh/cv rgbh/cv l - r l - r ...

  • Page 37

    Location and functions of control 5975696 barcodata 2100 140798 5-3 location and functions of control 5975696 barcodata 2100 140798 5-3 power switch : '1' = on, '0' = off power input : switchable between 120 vac and 230 vac ir receiver : receiver for control signals transmitted from the rcu. Diagnos...

  • Page 38

    Location and functions of control 5-4 location and functions of control 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 5-4 control panel terminology a. Local keypad getting access the keypad is located behind a door, screened with the name of the projector. To open the door, push once o...

  • Page 39

    Location and functions of control 5975696 barcodata 2100 140798 5-5 location and functions of control 5975696 barcodata 2100 140798 5-5 remote control (rcu) local keypad color phase sharpn tint brightn standby enter text exit pause contrast - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 (17(5 3$86( - + 3+$...

  • Page 40

    Location and functions of control 5-6 location and functions of control 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 5-6 terminology back light key : when activated, all keys will lit up and visible in the dark. Adj. : adjust key, to enter the adjustment mode or for quick exit in the ...

  • Page 41

    Power connection power connection 5975696 barcodata 2100 140798 6-1 6-1 5975696 barcodata 2100 140798 power connection power connection.

  • Page 42

    Power connection 6-2 power connection 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 6-2 0 i source 1 source 4 source 5 sou rce 2 sou rce 3 audi o out audio in c audio in b audio in a video video s video rgbh/ cv rgbh/cv l - r l - r l - r l - r ir r r g g b b h/c h/c v v rs 23 2 in rs 2...

  • Page 43

    Power connection power connection 5975696 barcodata 2100 140798 6-3 6-3 5975696 barcodata 2100 140798 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 (17(5 3$86( - + 3+$6( )5((= 7(;7 (;,7 $'- $''5 67% 6+$531(66 7,17 &2/25 %5,*+71(66 &2175$67 087( - + %$/$1&( - + 75(%/( - + 92/80( - + %$66 when switching on ...

  • Page 44

    Power connection 6-4 power connection 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 6-4 lamp lifetime 30 hours before end of lamp lifetime, the following message will scroll over the screen for 1 minute. This message will be repeated every 30 minutes. Press exit to remove the message b...

  • Page 45

    Connections connections 5975696 barcodata 2100 140798 7-1 7-1 5975696 barcodata 2100 140798 input connections connecting a video source to the video input connecting a s- video source to the s- video input connecting a rgb analog source to the rgb analog input connecting a component video source to ...

  • Page 46

    Connections connections 7-2 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 7-2 signal input connection to the projector. The following sources can be connected to the projector : - composite video - s-video - rgbs or rgsb - rgbhv - rgb3s or rg3sb - component video source input input typ...

  • Page 47

    Connections connections 5975696 barcodata 2100 140798 7-3 7-3 5975696 barcodata 2100 140798 connecting a video source to the bnc input (source 1) coposite video signals from a vcr, off air signal decoder, etc. ... 1 x bnc 1.0vpp ± 3 db connect the audio input signals to the audio a input when the au...

  • Page 48

    Connections connections 7-4 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 7-4 connecting a video source to the cinch (rca) input (source 2) coposite video signals from a vcr, off air signal decoder, etc. ... 1 x cinch (rca) 1.0vpp ± 3 db connect the audio input signals to the audio a i...

  • Page 49

    Connections connections 5975696 barcodata 2100 140798 7-5 7-5 5975696 barcodata 2100 140798 connecting a s-video source to the 4-pin mini din input (source 3) separate y-luma/c-chroma signals for higher quality playback of super vhs signals.. 1 x 4 pins plug pin configuration : 1 ground luminance 2 ...

  • Page 50

    Connections connections 7-6 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 7-6 connecting a rgb analog source to source 4 or 5 rgb analog input terminals with automatic sync detection. Sync can be separate horizontal and vertical sync (rgb-hv), composite sync (rgb-s) or sync signals on ...

  • Page 51

    Connections connections 5975696 barcodata 2100 140798 7-7 7-7 5975696 barcodata 2100 140798 all input signals can be 75 ohm terminated via soft switches (see also service mode). Connect the possible audio input signals for source 4 to the audio b input when the audio lock is off and for source 5 to ...

  • Page 52

    Connections connections 7-8 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 7-8 connecting a rgb3s analog source to source 4 or 5. Connect your rgb signals with tri-level sync, e.G. A professional vcr to the rgb input terminals of source 4 or source 5. Rgb3s/rg3sb analog : 5 x bnc red : ...

  • Page 53

    Connections connections 5975696 barcodata 2100 140798 7-9 7-9 5975696 barcodata 2100 140798 connecting a computer, e.G. Ibm pc (or compatible), apple macintosh to the rs 232 input of the projector. The barcodata 2100 projector has a rs232 port that allows it to communicate with a computer. Applicati...

  • Page 54

    Connections connections 7-10 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 7-10 connecting a rcvds 800 or rcvds 05 to the barcodata 2100. - up to 10 inputs with one rcvds800 or 20 inputs with the rcvds 05 and 90 inputs when rcvds's are linked via the expansion module. - serial communic...

  • Page 55

    Controlling controlling 5975696 barcodata 2100 140798 8-1 8-1 5975696 barcodata 2100 140798 controlling how to use the rcu projector address how to display a projector address how to program an address into the rcu picture controls with direct access sound controls with direct access the pause key t...

  • Page 56

    Controlling 8-2 controlling 8-2 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 the barcodata 2100 can be controlled with a. The rcu b. The hardwired rcu (cable is not included) c. The local keypad. Controlling the projector with the rcu and the hardwired rcu is equal. How to use the rcu...

  • Page 57

    Controlling controlling 5975696 barcodata 2100 140798 8-3 8-3 5975696 barcodata 2100 140798 c) point the front of the rcu directly at one of the ir sensors of the projector. When using the wireless remote control, make sure you are within the effective operating distance (30m (100ft) in a straight l...

  • Page 58

    Controlling 8-4 controlling 8-4 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 how to display a projector address? Press the address key (recessed key on the rcu) with a pencil. The projector's address will be displayed in a 'text box'. This text box disappears after a few seconds. To c...

  • Page 59

    Controlling controlling 5975696 barcodata 2100 140798 8-5 8-5 5975696 barcodata 2100 140798 contrast control a correct 'contrast' setting is important for good image reproduction. Adjust the contrast to the level you prefer, according to room lighting conditions. Use the + button for a higher contra...

  • Page 60

    Controlling 8-6 controlling 8-6 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 volume control volume control adjusts the volume. Use the + button for a higher volume. Use the - button for a lower volume. Bass control bass control adjusts the bass level (low tones). Use the + button for ...

  • Page 61

    Start up of the adjustment mode 9-1 start up of the adjustment mode 9-1 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 start up of the adjustment mode start up of the adjustment mode.

  • Page 62

    Start up of the adjustment mode 9-2 start up of the adjustment mode 9-2 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 adjustment mode all source set ups, picture tunings and geometry are made while in the 'adjustment mode' . Press the adjust or enter key to enter the 'adjustment mode'....

  • Page 63

    Start up of the adjustment mode 9-3 start up of the adjustment mode 9-3 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 some items in the adjustment mode are password protected. While selecting such an item, the projector asks to enter your password (password protection is only available...

  • Page 64

    Random access adjustment mode 5975696 barcodata 2100 140798 10-1 random access adjustment mode 10-1 5975696 barcodata 2100 140798 random access adjustment mode file service picture tuning audio tuning geometry random access adjustment mode file service picture tuning audio tuning geometry.

  • Page 65

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-2 10-2 5975696 barcodata 2100 140798 starting up the random access adjustment mode push the control disk up or down to highlight 'random access' and then press enter . Adjustment mode select a path from belo...

  • Page 66

    Random access adjustment mode 5975696 barcodata 2100 140798 10-3 random access adjustment mode 10-3 5975696 barcodata 2100 140798 file service before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When t...

  • Page 67

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-4 10-4 5975696 barcodata 2100 140798 load file push the control disk up or down to select load and press enter to display the load menu. The load menu displays the corresponding files depending on the instal...

  • Page 68

    Random access adjustment mode 5975696 barcodata 2100 140798 10-5 random access adjustment mode 10-5 5975696 barcodata 2100 140798 edit file the edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification...

  • Page 69

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-6 10-6 5975696 barcodata 2100 140798 a file with load) active vertical lines vertical shift in lines interlaced : toggle on/off (is automatically set to its correct position during the installation of a file...

  • Page 70

    Random access adjustment mode 5975696 barcodata 2100 140798 10-7 random access adjustment mode 10-7 5975696 barcodata 2100 140798 how to find the correct values for the displayed item? During the installation of a file with load, the horizontal period, the total number of vertical lines and the inte...

  • Page 71

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-8 10-8 5975696 barcodata 2100 140798 select "vertical" by pushing the control disk key up or down and press enter . The full image is displayed. The "vertical total lines" are already filled when an active f...

  • Page 72

    Random access adjustment mode 5975696 barcodata 2100 140798 10-9 random access adjustment mode 10-9 5975696 barcodata 2100 140798 options source number : the source number of a non-active source can be changed to any other source number. This makes it possible to create already a file for future sou...

  • Page 73

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-10 10-10 5975696 barcodata 2100 140798 rename to change the name of a selected file. Use the control disk to select rename and press enter . The rename selection menu will be displayed. File service load edi...

  • Page 74

    Random access adjustment mode 5975696 barcodata 2100 140798 10-11 random access adjustment mode 10-11 5975696 barcodata 2100 140798 copy to copy a selected file into a new file. Use the control disk to select copy and press enter . The copy selection menu will be displayed. Use the control disk to s...

  • Page 75

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-12 10-12 5975696 barcodata 2100 140798 delete to delete a selected file out of the list of files. Use the control disk to select delete and press enter . The delete selection menu will be displayed. Delete f...

  • Page 76

    Random access adjustment mode 5975696 barcodata 2100 140798 10-13 random access adjustment mode 10-13 5975696 barcodata 2100 140798 file options use the control disk to select options and press enter . The option selection menu will be displayed. File service load edit rename copy delete options pre...

  • Page 77

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-14 10-14 5975696 barcodata 2100 140798 sync slow/fast only active for sources 1, 2 and 3. When not source 1, 2 or 3, the following indication will be given on the menu : sync (-). Highlight sync by pushing t...

  • Page 78

    Random access adjustment mode 5975696 barcodata 2100 140798 10-15 random access adjustment mode 10-15 5975696 barcodata 2100 140798 color balance highlight color balance by pushing the control disk up or down and press enter to select the color balance selection menu. The next choices are possible :...

  • Page 79

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-16 10-16 5975696 barcodata 2100 140798 gamma with the gamma correction adjustment, it is possible to bring the details in dark image parts more to the front (lower gamma values) or to reduce the importance o...

  • Page 80

    Random access adjustment mode 5975696 barcodata 2100 140798 10-17 random access adjustment mode 10-17 5975696 barcodata 2100 140798 audio tuning highlight audio tuning by pushing the control disk up or down and press enter to select. The audio tuning menu will be displayed. The next items are availa...

  • Page 81

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-18 10-18 5975696 barcodata 2100 140798 ling'. Mute select 'mute' to stop the sound reproduction. The image is still displayed. Highlight 'mute' with the control disk and press enter to toggle select with é o...

  • Page 82

    Random access adjustment mode 5975696 barcodata 2100 140798 10-19 random access adjustment mode 10-19 5975696 barcodata 2100 140798 fade select fade by pushing the control disk up or down. The fade can be adjusted between -15 and 15. Fade on -15 : no sound reproduction on the external loudspeakers, ...

  • Page 83

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-20 10-20 5975696 barcodata 2100 140798 geometry highlight geometry by pushing the control disk up or down and press enter to select the geometry selection menu. The following adjustment are possible : - hori...

  • Page 84

    Random access adjustment mode 5975696 barcodata 2100 140798 10-21 random access adjustment mode 10-21 5975696 barcodata 2100 140798 size highlight size by pushing the control disk up or down and press select with é or ê then to return. Geometry shift size zoom blanking scale enter to select. The siz...

  • Page 85

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-22 10-22 5975696 barcodata 2100 140798 zoom highlight zoom by pushing the control disk up or down and press enter to select. Push the control disk to the right or forward to zoom in (more detail). Push the c...

  • Page 86

    Random access adjustment mode 5975696 barcodata 2100 140798 10-23 random access adjustment mode 10-23 5975696 barcodata 2100 140798 blanking highlight blanking by pushing the control disk up or down and press enter to select. Blanking adjustments affect only the edges of the projected image and are ...

  • Page 87

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-24 10-24 5975696 barcodata 2100 140798 blanking blanking [on] top bottom left right reset select with é or ê then to return. Adjustment of the blanking on the top of the image adjustment of the blanking on t...

  • Page 88

    Random access adjustment mode 5975696 barcodata 2100 140798 10-25 random access adjustment mode 10-25 5975696 barcodata 2100 140798 scale [1:1] when 'scale 1:1' is selected, the real input signal without image conversion is displayed on the screen witha resolution of 800 x 600 pixels. Parts of the i...

  • Page 89

    Random access adjustment mode random access adjustment mode 5975696 barcodata 2100 140798 10-26 10-26 5975696 barcodata 2100 140798.

  • Page 90

    Installation 11-1 installation 5975696 barcodata 2100 140798 11-1 5975696 barcodata 2100 140798 installation configuration internal patterns installation configuration internal patterns.

  • Page 91

    Installation 11-2 installation 11-2 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798 starting up the installation mode push the control disk up or down to highlight installation and then press enter . Adjustment mode select a path from below : random access installation service source 01 ...

  • Page 92

    Installation 11-3 installation 5975696 barcodata 2100 140798 11-3 5975696 barcodata 2100 140798 configuration highlight "configuration" by pushing the control disk up or down and press enter to select. For more information, see projector configuration in chapter instal- lation set up. Select with é ...

  • Page 93

    Installation 11-4 installation 11-4 5975696 barcodata 2100 140798 5975696 barcodata 2100 140798.

  • Page 94

    Service mode 5975696 barcodata 2100 140798 12-1 service mode 5975696 barcodata 2100 140798 12-1 service mode identification change password change projector address change baudrate pc reset lamp run time lamp run time history preset input balance change language i²c diagnosis 75 w termination dimmin...

  • Page 95

    Service mode 12-2 5975696 barcodata 2100 140798 service mode 12-2 5975696 barcodata 2100 140798 starting up the service mode push the control disk up or down to highlight service and then press enter . Some items in the service mode are password protected (when the password function is active). Ente...

  • Page 96

    Service mode 5975696 barcodata 2100 140798 12-3 service mode 5975696 barcodata 2100 140798 12-3 service identification change password change proj. Address change baudrate pc reset lamp runtime lamp runtime history preset input balance more ... Service change language 75 Ω termination dimming i2c di...

  • Page 97

    Service mode 12-4 5975696 barcodata 2100 140798 service mode 12-4 5975696 barcodata 2100 140798 select with ê or é then to return. Service identification change password change proj. Address change baudrate pc reset lamp runtime lamp runtime history preset input balance more ... Service change langu...

  • Page 98

    Service mode 5975696 barcodata 2100 140798 12-5 service mode 5975696 barcodata 2100 140798 12-5 identification to display the identification sreen, push the control disk up or down to highlight identification and press enter to display the identification screen. The identification screen gives an ov...

  • Page 99

    Service mode 12-6 5975696 barcodata 2100 140798 service mode 12-6 5975696 barcodata 2100 140798 - baud rate : transfer speed for communication with a ibm pc (or compatible) or mac. The baud rate of the projector must be the same as the baud rate of the connected computer. When there is a difference,...

  • Page 100

    Service mode 5975696 barcodata 2100 140798 12-7 service mode 5975696 barcodata 2100 140798 12-7 how to change the password ? Highlight change password by pushing the control disk up or down and press enter to display the change password menu. Enter displays the change password menu exit returns to t...

  • Page 101

    Service mode 12-8 5975696 barcodata 2100 140798 service mode 12-8 5975696 barcodata 2100 140798 change projector address every projector requires an individual address between 0 and 255. This address can be software installed. To change that address, push the control disk up or down to highlight cha...

  • Page 102

    Service mode 5975696 barcodata 2100 140798 12-9 service mode 5975696 barcodata 2100 140798 12-9 the next baud rates are available : - 9600 - 4800 - 2400 - 1200 - 600 - 300 - 150 - 75 the actual baud rate will be highlighted. To change the baud rate, push the control disk up or down and press enter t...

  • Page 103

    Service mode 12-10 5975696 barcodata 2100 140798 service mode 12-10 5975696 barcodata 2100 140798 lamp run time history to get an overview of the different lamp run times, highlight lamp run time history by pushing the control disk up or down and press enter . Enter displays the lamp run time histor...

  • Page 104

    Service mode 5975696 barcodata 2100 140798 12-11 service mode 5975696 barcodata 2100 140798 12-11 preset input balance highlight the black balance by pushing the control disk up or down and press enter to select. With the black balance adjustment, the black level of the red and blue channels can be ...

  • Page 105

    Service mode 12-12 5975696 barcodata 2100 140798 service mode 12-12 5975696 barcodata 2100 140798 change language highlight language by pushing the control disk up or down and press enter to select the language selection menu. For the moment, only english is available. Service change language 75 Ω t...

  • Page 106

    Service mode 5975696 barcodata 2100 140798 12-13 service mode 5975696 barcodata 2100 140798 12-13 select with or then to return. Service change language 75 Ω termination dimming i2c diagnosis more ... Dimming 010 0 50 dimming (for lamps with order numbers r9829510 and r9829740) highlights 'dimming' ...

  • Page 107

    Service mode 12-14 5975696 barcodata 2100 140798 service mode 12-14 5975696 barcodata 2100 140798 service change language 75 Ω termination dimming i2c diagnosis more ... I2c diagnosis d ca input analog tda8444 42h # # # input analog pcf8574a 74h # # # input analog pcf8574a 78h # # # input analog tda...

  • Page 108

    Optional equipment 5975696 barcodata 2100 140798 13-1 optional equipment 5975696 barcodata 2100 140798 13-1 optional equipment ir remote receiver hardwired rcu rcvds800/rcvds05 vs05 interfaces adapter and communication cables ceiling mount kit cm50 optional equipment ir remote receiver hardwired rcu...

  • Page 109

    Optional equipment 13-2 5975696 barcodata 2100 140798 optional equipment 13-2 5975696 barcodata 2100 140798 ir receiver 800 this infra red receiver unit makes it possible to control the barcodata 2100 from another room. There is a communication line with cable between the ir receiver and the project...

  • Page 110

    Optional equipment 5975696 barcodata 2100 140798 13-3 optional equipment 5975696 barcodata 2100 140798 13-3 rcvds 800 / rcvds 05 an optional rcvds 800 source selector makes it possible to connect up to ten sources to the projector, an optional rcvds 05 source selector makes it possible to connect up...

  • Page 111

    Optional equipment 13-4 5975696 barcodata 2100 140798 optional equipment 13-4 5975696 barcodata 2100 140798 interface universal analog interface order number : r9826100 rgb 120 mhz analog interface order number : r9826570 vga interface order number : r9828070 (230v) r9828079 (120v) mac interface ord...

  • Page 112

    Appendix a : standard source set up files 5975696 barcodata 2100 140798 a-1 appendix a : standard source set up files 5975696 barcodata 2100 140798 a-1 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz cga 640 x 200 59,924 15,700 14,318 912 640 262 200 ntsc 675 x 240i 29,970 15,734 13,5...

  • Page 113

    Appendix a : standard source set up files a-2 5975696 barcodata 2100 140798 appendix a : standard source set up files a-2 5975696 barcodata 2100 140798 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz vga75iso 640 x 480 75,000 39,375 31,500 800 640 525 480 mac_2 640 x 480 66,667 35,000...

  • Page 114

    Appendix a : standard source set up files 5975696 barcodata 2100 140798 a-3 appendix a : standard source set up files 5975696 barcodata 2100 140798 a-3 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz sg_60_3 960 x 680 60,000 43,200 54,432 1260 960 720 680 name resolution fvert fhor fp...

  • Page 115

    Appendix b : battery replacement in the rcu 5975696 barcodata 2100 140798 b-1 appendix b : battery replacement in the rcu 5975696 barcodata 2100 140798 1-1 battery replacement in the rcu. Remove the battery cover on he backside of the remote control by pushing the indicated handle a little to the bo...

  • Page 116

    Appendix c : focusing the lens 5975696 barcodata 2100 140798 c-1 appendix c : focusing the lens 5975696 barcodata 2100 140798 c-1 focusing the lens loosen the fastener ring of the lens by turning counter clock- wise. Focus the image by turning the lens barrel to the left or the right. Attention : do...

  • Page 117

    Appendix d : lens cleaning procedure 5975696 barcodata 2100 140798 d-1 appendix d : lens cleaning procedure 5975696 barcodata 2100 140798 d-1 lens cleaning procedure cleaning procedure for the sd lens to minimize the possibility of damaging the optical coating or scratch- ing exposed lens surfaces, ...

  • Page 118

    Appendix e : source number 90 - 99 5975696 barcodata 2100 140798 e-1 appendix e : source number 90 - 99 5975696 barcodata 2100 140798 e-1 source numbers 90 - 99 these source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a rcvds 800 or rcvds 0...

  • Page 119

    Appendix f : lenses 5975696 barcodata 2100 140798 a-1 appendix f : lenses 5975696 barcodata 2100 140798 a-1 lenses this appendix gives an overview of the table and formula for the available lenses for the barcodata 2100. An overview of all tables, diagrams and formulas can also be found in the manua...

  • Page 120

    Appendix f : lenses a-2 5975696 barcodata 2100 140798 appendix f : lenses a-2 5975696 barcodata 2100 140798 lens formulas to calculate the projector distance. Sd(1.15:1) metric pd= 1.079 x sw + 0.2929 inch pd= 1.079 x sw + 11.53 sd(1.2:1) metric pd= 1.135 x sw + 0.334 inch pd= 1.135 x sw +13.15 sd(1...

  • Page 121

    Insert card rcu 5975696 barcodata 2100 140798 insert card rcu 5975696 barcodata 2100 140798 " 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6 5&8 ,1387 352-(&725 5&9'6 ,13876285&(6 9lghr%1& 9lghr&lqfk 69lghr 5*%6+9 5*%6+9 5*%6 5*%6 5*%&9 5*%&9 6285&( 6(/(&7,21 5&8 ,1387 352-(&725 5&9'6 ,13876285&(6 ...