- DL manuals
- Barco
- Projector
- ELM G10
- Owner's Manual
Barco ELM G10 Owner's Manual - page 60
7-6
Random Access Adjustment Mode
5976070 BARCOELM G10 18012000
Field Polarity :
The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double lines
are visilble in the image). This can be corrected by forcing the field polarity to [neg] or [pos].
Use the ENTER key to toggle between [pos] and [neg].
Field Select : Default [both]
The field select is only used for interlaced images. One frame of an interlaced image contains two fields, an even and an odd field.
The choice exists to project [both] fields on the screen or only the [even] or [odd] field. This can be useful for 3D projection.
Use the ENTER key to toggle between [both], [even] and [odd].
Vertical Refresh [sync/async] : The way of updating the image information on the LCD panels.
Not available for PAL-SECAM-NTSC sources. This option will b displayed in gray.
1 For sources with a vertical frequency up to 60 Hz : the vertical refresh rate is the same as the vertical frequency of the incoming
source. This is a necessity to project moving images without 'motion artifacts'. For stationary images with a vertical frequency
up to 60 Hz it is still possible to use asynchronous refresh. When loading Pal, Secam, NTSC-files the synchronous mode is default,
for all other sources below 60 Hz asynchronous mode is default.
2 For sources with a vertical frequency higher that 60 Hz : the vertical refresh is different than the vertical frequency of the incoming
source. Synchronous refresh cannot be used.
Vertical Sync Polarity : [leading] or [trailing]
The vertical refresh can be synchronised with the leading sync edge or trailing sync edge. Default on [leading].
Toggling to [trailing] is only necessary for special applications where the trailing edge of the sync signal has to be taken as a reference.
Use the ENTER key to toggle between [leading] or [trailing]
Press EXIT to leave the Edit File Option menu.
A 'Confirm Edit File' menu will be displayed.
CONFIRM
EDIT FILE
Save changes to file
xga.c30?
Press ENTER to confirm and to save the new settings or EXIT to return without saving the new entered settings.
Rename a file
Start Up.
To change the name of a selected file:
1 Push the cursor key é or ê to highlight 'Rename' (menu 1).
2 Press ENTER.
The Rename selection menu will be displayed (menu 2).
3 Push the cursor key é or ê to select a file name (menu 2).
4 Press ENTER to select.
The Rename menu will be displayed with the selected file name already filled in, in the 'From file name :' area and in the 'To file name
:' area.
The first character in the 'To file name :' area is highlighted (menu 3).
Select with
é
or
ê
then
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
RENAME FILE
Filename
Src
Resolution
-----------------------------------------------------
Video525.s01 1
675x240i
Video525.c01 1
675x240i
Video525.c02 1
675x240i
-----------------------------------------------------
Active file : Video525.c50
Select with
é
or
ê
then
RENAME FILE
Frome file name :
Video525.s01
To file name :
demo.c10
Select with
ç
or
è
Reprogram with
é
or
ê
or numeric keys
menu 1
menu 2
menu 3
Downloaded From projector-manual.com Barco Manuals
Summary of ELM G10
Page 1
Barco projection systems date : 17102000 owner's manual rev. : 03 elm g10 r9001500 art. No. : r5976070 downloaded from projector-manual.Com barco manuals.
Page 2
Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, october 2000. All rights reserved. Trademarks are the rights of their respective owners. Barco n.V./projection systems noordlaan 5 b-8520 kuurne belgium tel : +32/56/368211 fax : +32/5...
Page 3: Table Of Contents
I-1 table of contents 5976070 barcoelm g10 17102000 i table of contents table of contents........................................................................................................ I-1 safety instruction related to elm projectors.............................................. 1 warnings ...
Page 4
I-2 table of contents 5976070 barcoelm g10 17102000 rigging points and accessories. .................................................................................................................. 3-11 optional profile sections .........................................................................
Page 5
I-3 table of contents 5976070 barcoelm g10 17102000 the pause key. ............................................................................................................................................................................... 5-10 the stand-by key. .....................................
Page 6
I-4 table of contents 5976070 barcoelm g10 17102000 input balance ............................................................................................................................................... 7-12 why adjusting the input balance ? ......................................................
Page 7
I-5 table of contents 5976070 barcoelm g10 17102000 service mode ..................................................................................................................9-1 service mode ...........................................................................................................
Page 8
I-6 table of contents 5976070 barcoelm g10 17102000 downloaded from projector-manual.Com barco manuals.
Page 9: Projectors
1-1 safety 5976070 barcoelm g10 150999 1 safety instruction related to elm projectors warnings to prevent personel injury the customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to barco. To prevent injuries and physical damage, al...
Page 10
1-2 safety 5976070 barcoelm g10 150999 downloaded from projector-manual.Com barco manuals.
Page 11: Packaging And Dimensions
2-1 packaging and dimensions 5976070 barcoelm g10 18012000 2 1 2 3 4 5 3 7 9 pull to open packaging and dimensions projector packaging way of packaging the projector can be packed in two different ways : - in a flightcase or - in carton. Flightcase the projector is packed in a flightcase without the...
Page 12
2-2 packaging and dimensions 5976070 barcoelm g10 18012000 lamp packaging way of packaging the lamp casing is supplied as an individual item. The lamp can be packed in two different ways : - in a flightcase or - in carton. Warning : always transport the lamp in a vertical position ! Lens packaging w...
Page 13
2-3 packaging and dimensions 5976070 barcoelm g10 18012000 1420 155 475 7 6 0 7 4 5 785 1314 67 950 190,5 ( n o m in a l) 3 4 4 45 8 7 ,5 273 2 7 ,5 950 4 2 6 ( ) 1 1 0 top view side view ref dual stack interlocking fasteners left and right air out air in digital & analog inputs local keypad & displ...
Page 14
2-4 packaging and dimensions 5976070 barcoelm g10 18012000 downloaded from projector-manual.Com barco manuals.
Page 15: Installation Guidelines
3-1 installation guidelines 5976070 barco elm g10 17102000 3 installation guidelines installation guidelines ambient temperature conditions careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the pr...
Page 16
3-2 installation guidelines 5976070 barco elm g10 17102000 regardless of the type of screen used, it is important that your screen is of sufficient height to display the images at the aspect ratio intended to be used. If you have insufficient height, you will have to reduce the overall image size in...
Page 17
3-3 installation guidelines 5976070 barco elm g10 17102000 image 2 image 3 image 4 image 5 screen pd b floor projector cd sh optical axis projection lens sh sw side view back view screen top view sw floor table/top side facing ceiling a cd = sh/2 + b - a screen pd b floor projector cd sh optical axi...
Page 18
3-4 installation guidelines 5976070 barco elm g10 17102000 air in ir out safety area for air in & out image 7 image 6 image 6a warning on rotating the projector when the lamp casing is installed, it is not allowed to rotate the projector clockwise when facing the lenses. An internal tilt switch will...
Page 19
3-5 installation guidelines 5976070 barco elm g10 17102000 installing the projection lamp. 1 unplug the projector from the wall outlet. 2 on the input side of the projector, remove the side by turning the 3 bolts a quarter counter clockwise (image 8). 3 flip the lower side of the plate a little and ...
Page 20
3-6 installation guidelines 5976070 barco elm g10 17102000 image 14 remark : no electrical connections have to be made while installing the lamp casing. All connections are automatically made while inserting the lamp casing. Note : while starting up the projector, the electronics detect if a lamp is...
Page 21
3-7 installation guidelines 5976070 barco elm g10 17102000 lenses which lens has to be selected. 1 determine the required screen width. 2 determine the approximate position of the projector in the projection room with regard to the screen and measure the projector-screen distance (pd). 3 use the len...
Page 22
3-8 installation guidelines 5976070 barco elm g10 17102000 installing the projection lens the projector is supplied without any lens. Remark : to install a projection lens, the projector must be switched on as the lens bridge must be shifted upwards. Installation of qld lenses : remove the foam rubb...
Page 23
3-9 installation guidelines 5976070 barco elm g10 17102000 battery installation in the rcu. How is the battery delivered ? A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. How to install ? To install the battery, remove the battery ...
Page 24
3-10 installation guidelines 5976070 barco elm g10 17102000 image 16 image 17 c a a stacking two projectors two projectors can be stacked on each other without using extra tools or accessories. Handle as follow : 1 pull the handler a of the second projector a little backwards (image 16) 2 put the se...
Page 25
3-11 installation guidelines 5976070 barco elm g10 17102000 image 19 a b image 18 rigging points and accessories. Optional profile sections two sets of profile sections are available as option. Slots are made in these profile sections for easy inserting the clamps and for easy adjusting the clamp po...
Page 26
3-12 installation guidelines 5976070 barco elm g10 17102000 downloaded from projector-manual.Com barco manuals.
Page 27
4-1 connections 5976070 barcoelm g10 18012000 4 9 , '(2 , 13 87 9,'(2 6 9,'(2 r g b h / c v on 98 27910 r g b h / c v o n h i g h bandwidth r gb ana lo g inp ut r g b h / c v on hig h bandwi d th 5 c able in put out in on 984011 0 6 ', ',*,7 $ / ,13 87 o ut in on 984011 0 6 ', ',*,7 $ / ,13 87 c om ...
Page 28
4-2 connections 5976070 barcoelm g10 18012000 lamp run time is 500 hours. Operating the lamp longer than 500 hours may damage the projector. Please replace the lamp. When ok (enter) is pressed to go on, the warning will be repeated every 30 min. The total lifetime of the lamp for a safe operation is...
Page 29
4-3 connections 5976070 barcoelm g10 18012000 9,'(2,1387 9,'(2 69,'(2 r g b h / c v on 98 279 1 0 r g b h / c v on high bandwidth rgb analog input r g b h / c v on high bandwidth 5 cable input out in on 98 401 1 0 6',',*,7$/,1387 out in on 98 401 1 0 6',',*,7$/,1387 comm port trigger out rs232/422 o...
Page 30
4-4 connections 5976070 barcoelm g10 18012000 input module insertion into the projector to insert a module in one of the free slots, handle as follow : 1 power down the projector and disconnect the power cord from the wall outlet. 2 remove the dummy plate covering the chosen input slot by turning ou...
Page 31
4-5 connections 5976070 barcoelm g10 18012000 select with é or ê then to return. Fixed rgb analog input (slot 1) slot 1 has rgb analog input terminals (bnc) with separate horizontal and vertical sync (rgbhv) or with composite sync input (rgbs). Always use an interface when a computer and local monit...
Page 32
4-6 connections 5976070 barcoelm g10 18012000 possible indication : rgb-ss [cs or hs&vs] = separate sync is composite sync or horizontal and vertical sync. Rgb-ss [3lss or cv] = separate sync is composite tri-level sync or composite video. Fixed 5-input slot (slot 2) slot 2 has 5 bnc input terminals...
Page 33
4-7 connections 5976070 barcoelm g10 18012000 s-video 98 2790 0 video l r audio 9,'(269,'(2,1387 on on video/s-video input module what can be connected to the video input ? Composite video signals from a vcr, off air signal decoder, etc... What can be connected to the s-video input ? Separate y-luma...
Page 34
4-8 connections 5976070 barcoelm g10 18012000 select with é or ê then to return. Select with é or ê then to return. ) or d wlq j r uq r q ior d wlq j lq s x w floating non-floating - - - how to set the input priority ? 1 press adjust or enter key to start up the adjustment mode. 2 push the cursor ke...
Page 35
4-9 connections 5976070 barcoelm g10 18012000 r g b h / c v on 5*%$1$/2*,1387 98 279 10 vert. Sync hor. Sync or composite sync blue green red rgb analog input module. What can be connected to these inputs ? Rgb analog input terminals with separate horizontal and vertical sync inputs(rgb-hv), with co...
Page 36
4-10 connections 5976070 barcoelm g10 18012000 )ordwlqjruqrqiordwlqjlqsxw floating non-floating -6\qfvhohfwlrq 6hsdudwhv\qf 6\qfrqjuhhq - - - - - select with é or ê then to return. Select with é or ê then to return. Possible indication : rgb-ss [cv] = separate sync is composite video signal h/c inpu...
Page 37
4-11 connections 5976070 barcoelm g10 18012000 r-y y b-y s on 98 2 793 0 &20321(179,'(2,1387 sync component input module. What can be connected to these inputs ? Connect your component signals (y-luma, r-y and b-y), e.G. A professional vcr to the component input module. Blue - luma luma red - luma 9...
Page 38
4-12 connections 5976070 barcoelm g10 18012000 r g b h / c v on 5*%/(9(/6 98 27 920 )ordwlqjruqrqiordwlqjlqsxw floating non-floating 6\qfvhohfwlrq 6hsdudwhv\qf 6\qfrq - - - - - - 1rup do6\qf 7ulohyho6\qf - - vert. 3 level sync blue green red hor. Or composite 3 level sync factory preset : j8 'separa...
Page 39
4-13 connections 5976070 barcoelm g10 18012000 )ordwlqjruqrqiordwlqjlqsxw floating non-floating -6\qfvhohfwlrq 6hsdudwhv\qf 6\qfrqjuhhq - - - - - all input signals are always 75 ohm terminated, even in the "not selected" mode. How to select the rgb3s input : key in the corresponding slot number on t...
Page 40
4-14 connections 5976070 barcoelm g10 18012000 how to select the digital input : key in the corresponding slot number on the rcu or the local keypad. Note : when a rcvds05 is connected to the projector, the sdi input is available by keying in 85 or 86 on the rcu. Hd sdi digital input (slot 5 & 6) wh...
Page 41
4-15 connections 5976070 barcoelm g10 18012000 9,'(2,1387 9,'(2 69,'(2 r g b h / c v on 9 8 2791 0 r g b h / c v on high bandwidth rgb analog input r g b h / c v on high bandwidth 5 cable input out in on 98 40 1 1 0 6',',*,7$/,1387 out in on 98 40 1 1 0 6',',*,7$/,1387 comm port trigger out rs232/42...
Page 42
4-16 connections 5976070 barcoelm g10 18012000 connecting a vs05 to the projector the vs05 can switch up to 5 composite video sources, 3 super video sources and 1 rgb analog or component video source to the projector. In addition, the audio signal proper to the source, can be switched to an audio am...
Page 43: Getting Started
5-1 getting started 5976072 barcoelm g10 18012000 5 getting started remote control & local keypad functionality this remote control includes a battery powered infrared (ir) transmitter that allows the user to control the projector remotely. This remote control and local keypad is used for source sel...
Page 44
5-2 getting started 5976070 barcoelm g10 18012000 terminology 1 barco key : = selection key, to get direct access to the lens adjustment menus. 2 adj. : adjust key, to enter or exit the adjustment mode. 3 address key (recessed key), to enter the address of the projector (between 0 and 9). Press the ...
Page 45
5-3 getting started 5976072 barcoelm g10 18012000 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 ( 17(5 32a 3$86( - + 3+$6( )5((= 7( ;7 (;,7 $'- 67% 6+$531 (66 7,17 &2/25 %5,* +71(66 &2175$67 +( /3 ? Color phase sharpn tint brightn standby enter text exit pause &2175$67 $ operating the projector switching ...
Page 46
5-4 getting started 5976070 barcoelm g10 18012000 select with é or ê then to return. Adjustment mode select a path from below : random access installation service select with é or ê then to return. Service identification change password change language change proj. Address serial communication l a m...
Page 47
5-5 getting started 5976072 barcoelm g10 18012000 lens adjustment zoom/focus zoom with é or ê focus with ç or è to shift to return lens adjustment shift shift with é or ê, ç or è to shift to return tilt tilt with é , ê to zoom/focus to return quick lens adjustment for a quick lens set up and image s...
Page 48
5-6 getting started 5976070 barcoelm g10 18012000 using the rcu pointing to the reflective screen point the front of the rcu to the reflective screen surface. Ceiling screen ir sensor rcu quick on screen color change for quick change of the the on-screen color of the highlighted items. The highlight...
Page 49
5-7 getting started 5976072 barcoelm g10 18012000 hardwired remote input rcu used in a hardwired configuration. Plug one end of the remote cable in the connector on the bottom of the rcu and the second side in the connector in the front panel of the projector labelled 'hardwired ctrl1'. Rcu 9,'(2,13...
Page 50
5-8 getting started 5976070 barcoelm g10 18012000 projector address why a projector address ? As more than one projector can be installed in a room, the separate projectors should be separately addressable with an rcu or computer. There for each projector has its own address. Set up an individual pr...
Page 51
5-9 getting started 5976072 barcoelm g10 18012000 projector address 001 to continue using the rcu with that specific address, it is necessary to enter the same address with the digit buttons (address between 0 and 9) within 5 seconds after pushing the address key. For example : if the address key di...
Page 52
5-10 getting started 5976070 barcoelm g10 18012000 phase control use the control + and - button to adjust the phase of the displayed image to climate pixel jitter on computer generated images. Note : this contol has no effect on video images. The pause key. When the pause key is pressed, the image p...
Page 53
6-1 start up of the adjustment mode 5976070 barcoelm g10 18012000 6 start up of the adjustment mode adjustment mode start up all source parameters, picture tuning and geometry are made while in the 'adjustment mode'. Press the adjust or enter key to enter the 'adjustment mode'. You are now in the 'a...
Page 54
6-2 start up of the adjustment mode 5976070 barcoelm g10 18012000 error invalid password to return when the password is correct, you gain access to the selected item. When the password is wrong. The error message "invalid password" is displayed on the screen. Press exit to continue and to return to ...
Page 55
7-1 random access adjustment mode 5976070 barcoelm g10 18012000 7 random access adjustment mode random access mode starting up push the control disc up or down to highlight 'random access' and then press enter. Random access adjustment mode load edit rename copy options delete cti color temperature ...
Page 56
7-2 random access adjustment mode 5976070 barcoelm g10 18012000 picture service connecting a new source. Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of ...
Page 57
7-3 random access adjustment mode 5976070 barcoelm g10 18012000 select with é or ê then to return. Load file start up the load file. 1 push the cursor key é or ê to highlight 'load' (menu 1). 2 press enter to select. The load menu displays the corresponding files depending on the installed filter (m...
Page 58
7-4 random access adjustment mode 5976070 barcoelm g10 18012000 edit file what can be done with the edit file menu ? The edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the da...
Page 59
7-5 random access adjustment mode 5976070 barcoelm g10 18012000 select with é or ê to toggle ç or è to change value to return edit file options source number 1 clamp position [leading] clamp delay 0 clamp width 1 0 field polarity [pos] field select [both] vertical refresh [sync] vert. Sync polarity ...
Page 60
7-6 random access adjustment mode 5976070 barcoelm g10 18012000 field polarity : the field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double lines are visilble in the image). This can be corrected by forcing the field polarity to [neg]...
Page 61
7-7 random access adjustment mode 5976070 barcoelm g10 18012000 select with é or ê then to return. How to change the characters ? 1 push the cursor key ç or è to select the desired character (menu 4). 2 change that character by pushing the cursor key é or ê. Numeric characters can be entered directl...
Page 62
7-8 random access adjustment mode 5976070 barcoelm g10 18012000 select with é or ê then to return. File service load edit rename copy d e l e t e options delete file filename src resolution ----------------------------------------------------- video525.S01 1 675x240i video525.C01 1 675x240i video525...
Page 63
7-9 random access adjustment mode 5976070 barcoelm g10 18012000 picture tuning cti [on] color temperature gamma decoding [ebu] dynamic color depth noise reduction input balance select with é or ê then to return. Picture tuning start up to improve the image quality, the item in the picture tuning men...
Page 64
7-10 random access adjustment mode 5976070 barcoelm g10 18012000 color temperature projector white computer 9300k video 6500k film 5400k broadcast 3200k custom balance select with é or ê then to return. Picture tuning cti [on] color temparature gamma decoding [ebu] dynamic color depth noise reductio...
Page 65
7-11 random access adjustment mode 5976070 barcoelm g10 18012000 3 picture tuning cti [on] color temperature gamma decoding [ebu] dynamic color depth noise reduction input balance gamma = 2.2 how to change the gamma value ? To change the gamma value : 1 push the cursor key é or ê to highlight 'gamma...
Page 66
7-12 random access adjustment mode 5976070 barcoelm g10 18012000 select with é or ê then to return. Picture tuning cti [on] color temperature gamma decoding [ebu] dynamic color depth noise reduction input balance input balance white balance black balance default a d j u s t red with é or ê blue with...
Page 67
7-13 random access adjustment mode 5976070 barcoelm g10 18012000 select with é or ê then to return. Random access adjustment mode file service picture tuning geometry geometry shift size side keystone blanking aspec ratio [4:3] options select with é or ê then to return. Geometry shift size side keys...
Page 68
7-14 random access adjustment mode 5976070 barcoelm g10 18012000 geometry shift size side keystone blanking aspec ratio [4:3] options select with or then to return. Geometry shift size side keystone blanking aspec ratio [4:3] options select with or then to return. Size what can be done ? The size ca...
Page 69
7-15 random access adjustment mode 5976070 barcoelm g10 18012000 bottom blanking top blanking right blanking left blanking blanking what can be done ? Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out...
Page 70
7-16 random access adjustment mode 5976070 barcoelm g10 18012000 options which options are available within the geometry menu ? It is possible to use the same keystone correction for all source. Changing the geometry options. 1 push the cursor key é or ê to highlight 'options' (menu 1). 2 press ente...
Page 71: Installation Mode
8-1 installation mode 5976070 barcoelm g10 05052000 8 installation mode installation mode start up push the cursor key é or ê to highlight 'installation mode' and then press enter. Adjustment mode select a path from below : random access installation service source 01 installation input slots 800 pe...
Page 72
8-2 installation mode 5976070 barcoelm g10 05052000 select with é or ê to toggle to return. Select with é or ê to toggle to return. 800 peripheral menu 2 output module [standard] infrared [ ppm ] component video component video - ss : component video with separate sync component video - soy : compon...
Page 73
8-3 installation mode 5976070 barcoelm g10 05052000 configuration what can be done ? The way of physical installation of the projector can be defined to the projector. The following installation configurations are possible : - front/table - front/ceiling - rear/ceiling - rear/table set up the correc...
Page 74
8-4 installation mode 5976070 barcoelm g10 05052000 changing the background color to change the background color handle as follow : 1 push the cursor key é or ê to highlight 'no signal' (menu 1). 2 press enter to select. The 'no signal' menu will be displayed (menu 2). 3 push the cursor key é or ê t...
Page 75
8-5 installation mode 5976070 barcoelm g10 05052000 internal patterns what can be done with these internal patterns ? The projector is equipped with different internal patterns which can be used for measurment and alignment purposes. How to select an internal pattern ? 1 push the cursor key é or ê t...
Page 76
8-6 installation mode 5976070 barcoelm g10 05052000 zoom/focus/shift/tilt within the displayed pattern it is possible to adjust the zoom/focus and the shift. Use the enter key to toggle between zoom/focus, shift and tilt operation. How to zoom/focus ? 1 push the cursor key é or ê to select zoom/focu...
Page 77
8-7 installation mode 5976070 barcoelm g10 05052000 bridge open with é close with ê to return select with é or ê then to return. Lens adjustment zoom/focus shift tilt bridge options bridge up or down before mounting a lens or replacing a lens, the lens bridge with the motors has to be moved to its h...
Page 78
8-8 installation mode 5976070 barcoelm g10 05052000 menu position what can be done ? The adjustment menus can be displayed in the corner or in the middle of the image. How to set up? 1 push the cursor key é or ê to highlight 'menu position' (menu 1). 2 press enter to toggle between [default] and [ce...
Page 79: Service Mode
Service mode 9-1 5976070 barcoelm g10 05052000 9 select with é or ê to toggle to return. Lamp constant light output [yes] serial number : r101111 type : b400049 run time : 10 hours remaining run time : 490 hours number of strikes : 10 service mode service mode start up push the cursor key é or ê to ...
Page 80
Service mode 9-2 5976070 barcoelm g10 05052000 add-ins light sensor : [inactive] select with é or ê to toggle/select to return. Service identification change password change language change proj. Address serial communication l a m p more... Select with é or ê then to return. Service barco logo prese...
Page 81
Service mode 9-3 5976070 barcoelm g10 05052000 - projector run time: gives the total run time since the first start up. All projectors leave the factory with a run time of approximately 24 hours. - projector serial number : indicates the fabrication number of the projector. This number can be useful...
Page 82
Service mode 9-4 5976070 barcoelm g10 05052000 select with é or ê then to return. Service identification change password change language change proj. Address serial communication l a m p more... Menu 1 menu 2 how to change the password ? To change the password for all the levels can be done as follo...
Page 83
Service mode 9-5 5976070 barcoelm g10 05052000 select with é or ê then to return. Service identification change password change language change proj. Address serial communication l a m p more... Select with é or ê then to return. Change projector address how to change that address ? 1 push the curso...
Page 84
Service mode 9-6 5976070 barcoelm g10 05052000 setting up the baud rate to change the baud rate, handle as follow : 1 push the cursor key é or ê to highlight 'baudrate' (menu 1). The actual baud rate will be displayed. 2 press enter to toggle between the available baudrates. Default : 9600 select wi...
Page 85
Service mode 9-7 5976070 barcoelm g10 05052000 select with é or ê then to return. Select with é or ê to toggle to return. Lamp constant light output [yes] serial number : r101111 type : b400049 run time : 10 hours remaining run time : 490 hours number of strikes : 10 menu 2 service identification ch...
Page 86
Service mode 9-8 5976070 barcoelm g10 05052000 select with é or ê then to return. Add-ins how to get add ins ? The available add-ins can be activated by entering your personal access key when buying this function. Please contact your reseller. He will ask for the serial number of your projector. Ava...
Page 87
Service mode 9-9 5976070 barcoelm g10 05052000 select with é or ê then to return. I2c diagnosis d c a decoder 12h # # # motor driver 1ah # # # light sensor 1ch # # # lamp driver 20h # # # lamp driver 22h # # # power supply 30h # # # input selector 46h # # # pmp input selector 4ah # # # input selecto...
Page 88
Service mode 9-10 5976070 barcoelm g10 05052000 downloaded from projector-manual.Com barco manuals.
Page 89: Programmable Function Keys
Programmable function keys 10-1 5976070 barco elm g10 05052000 10 programmable function keys programmable function keys what can be done with these keys the five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu. How ca...
Page 90
Programmable function keys 10-2 5976070 barco elm g10 05052000 downloaded from projector-manual.Com barco manuals.
Page 91
A-1 appendix a : standard source set up files 5976070 barcoelm g10 261099 a standard source set up files name : name of file, contains the settings resolution : image resolution, when followed by ...I means interlaced. Fvert hz : vertical frame fre- quency of the source fhor khz : horizontal frequen...
Page 92
A-2 appendix a : standard source set up files 5976070 barcoelm g10 261099 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz pam500 640 x 400 60,000 26,400 22,810 864 640 440 400 pam800 1120 x 375i 44,936 36,443 50,000 1372 1120 406 375 pc98_1 640 x 400 56,416 24,823 21,050 848 640 440 4...