Barco F90 series Quick Start Manual

Manual is about: DLP Projectors

Page of 4

Download

Bookmark us

F90-series

Quick Start Guide

Printed on FSC certified paper (www.fsc.org)

General

601-0383-01

LED status light

Adjustable feet.

Projector lens.

Lens holder.

IR receiver: For receiving remote control signals

LCD touchscreen panel.

Keypad: Used for local operations on the projector.

Connector panel: Control and communication interfaces for the projector.

Front USB and Triggerboard.

LED Status Light

Projector Main Components and interface

WARNING!

Class 1 Laser RG2 Product.

For North America, Class 3R up to TR 2.33

This Projector may become RG3.

Refer to user manual before operating

Do not stare into beam. This projector

has class 4 laser cluster. Do not attempt

to disassemble or modify this projector.

Red light indicates a failure.

Contact service representative.

Page 1
F90-series quick start guide printed on fsc certified paper (www.Fsc.Org) 8 7 6 5 4 3 2 1 general 601-0383-01 led status light adjustable feet. Projector lens. Lens holder. Ir receiver: for receiving remote control signals lcd touchscreen panel. Keypad: used for local operations on the projector. Co...
Page 2
F90-series quick start guide general dmx: dmx512 input rs-232: 9- pin db9 connector sync: bnc sync port in/out; bidir mini-din trigger: 12vdc - 0,5a (6w) dl-dvi-d: dual dvi-i 1.0 (dvi_d functionallity) hdmi: standard hdmi 2.0 hdbaset: standard rj45 8p8c connector sdi: sdi connector with barcolink su...
Page 3
F90-series quick start guide ac 110-240v connect power press power on button installation conditions installation conditions ventilation requirements ventilation requirements general 1 2 3 content is distorted or color is not correct content is distorted or color is not correct 1 2 power up procedur...
Page 4
F90-series quick start guide 1 2 3 maintenance installing lens 1 2 3 2 4 1 4 5 3 go to www.Barco.Com and select your product. All available software and hardware downloads are filed under the technical downloads tab. Download and unzip the firmware .Zip file. Extract and save the .Fw file to a usb s...