1. DL manuals
  2. Barco
  3. Media Converter
  4. ImagePRO
  5. Installation Manual

Barco ImagePRO Installation Manual

Manual is about: Multi Format Image Processor

Summary of ImagePRO

  • Page 1

    Manual# 26-0302000-00 / rev e www.Barco.Com www.Folsom.Com folsom barco events usa 11101 trade center drive rancho cordova , ca 95670 imagepro, imagepro-sdi, imagepro-hd installation manual model ip-2003.

  • Page 3

    70 imagepro – multi format image processor manual # 26-0302000-00 / revision e n - input aspect ratio: n[0-5], 1:1

  • Page 5

    Record of changes rev # date eco # description approved by a 11/14/03 1171 released a. Yerocostas b 12/15/03 1188 updated save system state description to include saving input channel (s/w rev 1.01). Miscellaneous spelling corrections. Added ethernet functionality. Added save messages when exiting i...

  • Page 7

    Operators safety summary the general safety information in this summary is for operating personnel. Do not remove covers or panels there are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover. Do n...

  • Page 9: Imagepro

    Imagepro ™ quick start guide step 1: connect input sources to imagepro ™ 1. Connect analog video source to the imagepro ™ using the three universal video inputs. 2. Connect any sdi video source to the sdi video input (imagepro-sdi ™ and imagepro-hd™ only). 3. Connect dvi video source to the dvi vide...

  • Page 10

    Search order: last configuration saved for the selected input channel, one of 64 stored configurations, any custom formats stored by the user, library formats and finally using a “best guess” algorithm matching to the closest library format. While this approach generally leads to an acceptable outpu...

  • Page 11: Table of Contents

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor i table of contents imagepro ™ quick start guide ____________________________________________________________________i table of contents _________________________________________________________________________________i chap...

  • Page 12

    Ii image pro – multi format image processor manual # 26-0302000-00 / revision e s ample p hase _________________________________________________________________________________________ 31 a ctive a rea __________________________________________________________________________________________ 31 c on...

  • Page 13

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor iii chapter four_____________________________________________________________________________________ 61 serial command syntax _________________________________________________________________________ 63 s erial p arameters ...

  • Page 14

    Iv image pro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 15: Chapter One

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 1 1 chapter one introduction what you will find in this chapter… about imagepro tm features model ip-2003 imagepro – multi format image processor.

  • Page 16

    2 image pro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 17: Imagepro

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 3 imagepro tm overview description the folsom imagepro ™ is a powerful all-in-one signal processor that accepts a wide range of video input signals and processes them into a number of different output signal formats to meet ...

  • Page 18

    4 image pro – multi format image processor manual # 26-0302000-00 / revision e additional imagepro-sdi ™ features • one sd sdi input and output • can be later upgraded to imagepro-hd • motion adaptive de-interlacing for hdtv inputs • low video delay • logo image capture and recall feature • dissolve...

  • Page 19: Chapter Two

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 5 2 chapter two installation what you will find in this chapter… rear panel connectors rack-mount installation video input & output connections remote control connections power cord/line voltage selection model ip-2003 image...

  • Page 20

    6 image pro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 21: Installation

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 7 installation imagepro ™ rear panel connectors universal input 1 in loop in loop universal input 2 h/c g/y/composite r/r-y/c universal input 3 b/b-y v in in in in in loop h/c universal input 3 g/y/composite r/r-y/c b/b-y v ...

  • Page 22

    8 image pro – multi format image processor manual # 26-0302000-00 / revision e imagepro-sdi ™ rear panel connectors universal input 1 in loop universal input 2 h/c g/y/composite r/r-y/c universal input 3 b/b-y v in in in in in loop h/c universal input 3 g/y/composite r/r-y/c b/b-y v loop loop loop l...

  • Page 23

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 9 imagepro-hd ™ rear panel connectors rs-232 remote control h/c genlock in h/c/burst dvi-d output output 2 h/c v sdi output output composite sdi input v g/y/composite b/b-y universal input 3 r/r-y/c universal input 1 h/c v e...

  • Page 24

    10 image pro – multi format image processor manual # 26-0302000-00 / revision e rack-mount installation imagepro tm units are designed to be rack mounted and are supplied with front rack-mount hardware. Rear rack- mount brackets are available as a kit and are recommended for use when units are mount...

  • Page 25

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 11 video input connections universal input connectors the video input section on the imagepro tm rear panel provides three universal inputs. Each input can accept rgb, yuv, s-video (y/c), or composite (ntsc, pal or secam) vi...

  • Page 26

    12 image pro – multi format image processor manual # 26-0302000-00 / revision e video output connections four independently buffered outputs (one five wire bnc connection, one hd-15, one s-video, and one composite video bnc) are provided. Both 5-wire and hd-15 outputs provide the same video in rgb o...

  • Page 27

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 13 rgb/ypbpr video output connect the output device to the set of bnc connectors marked r/r-y, g/y and b/b-y on the output section of the imagepro ™ rear panel s-video (y/c) video output the y/c video output connector is a 4...

  • Page 28

    14 image pro – multi format image processor manual # 26-0302000-00 / revision e dvi-i video in and loop-through connectors (universal input 1-imagepro-hd ™) two dvi-i female connectors are located on the rear panel of the imagepro-hd ™. One is used for video input and the other one is used for the b...

  • Page 29

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 15 rs-232 remote control connections the remote serial port can be connected to a pc or other remote controller to support remote control of the imagepro tm unit. Pinouts for the remote port are shown below. 1 2 3 4 5 6 7 8 ...

  • Page 30

    16 image pro – multi format image processor manual # 26-0302000-00 / revision e connection to ac power power cord/line voltage selection imagepro tm is rated to operate with the following supplies: input power: 100-240 vac, 47-63 hz power consumption : 150 watts maximum the imagepro tm wide screen i...

  • Page 31

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 17 connect imagepro tm to 115 vac power using the power cord supplied with the unit. Locate the power switch on the power entry module at the rear of the unit and turn the power on. While the main board is initializing, “ple...

  • Page 32

    18 image pro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 33: Chapter Three

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 19 3 chapter three operation what you will find in this chapter… front panel controls status display menu control setup menus input setup menu output setup menu system options menu test pattern menu zoom menu pan menu model ...

  • Page 34

    20 imagepro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 35: Operation

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 21 operation imagepro ™ can be controlled by using the front panel menu controls or remotely via rs-232 or ethernet interface. The front panel menu controls are described in detail in this section. Remote control commands ar...

  • Page 36

    22 imagepro – multi format image processor manual # 26-0302000-00 / revision e imagepro-sdi ™ front panel controls adjust h s e a r e r c logo ---------- black zoom esc pan sel menu keys pat setup test 3 2 1 inputs freeze sdi figure 3-2 imagepro-sdi ™ front panel sel used to select a menu option, co...

  • Page 37

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 23 imagepro-hd ™ front panel controls adjust test sel setup esc pan zoom pat 1 2 3 logo ---------- black menu keys inputs freeze h s e a r e r c sdi figure 3-3 imagepro-hd ™ front panel sel used to select a menu option, cont...

  • Page 38

    24 imagepro – multi format image processor manual # 26-0302000-00 / revision e in addition to the twelve illuminated push buttons, the front panel controls also include a vacuum fluorescent display (vfd) and an adjustment knob. The operation of each menu displayed on the vfd is described in detail i...

  • Page 39

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 25 for imagepro-sdi and imagepro-hd units, when there is a logo image stored in non-volatile memory, the logo will be loaded into memory at this time. During this loading process, the following message will be displayed on t...

  • Page 40

    26 imagepro – multi format image processor manual # 26-0302000-00 / revision e status display after power-up or anytime none of the four menu buttons are selected, the display will show a basic status. This screen gives information about the currently selected system inputs and outputs. The input se...

  • Page 41

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 27 the user can scroll through the menu items by turning the adjust control knob. A pointer (>) at the left of a menu item indicates the current position of the scroll bar. When the desired menu item is reached, the user pre...

  • Page 42

    28 imagepro – multi format image processor manual # 26-0302000-00 / revision e menu operation setup this is the top-level menu accessed by pressing the setup button. Setup information can be stored in non-volatile memory within imagepro tm and will be automatically recalled each time the unit is tur...

  • Page 43

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 29 indicates the current input video format in the form, hact x vact @ vr hz (i.E 1024x768@75 hz). If the currently selected input channel and source do not have a valid input signal, the field will display “invalid signal”....

  • Page 44

    30 imagepro – multi format image processor manual # 26-0302000-00 / revision e the color space value allows the user to select among the possible component video standards for ypbpr. For all other video types the color space is rgb and cannot be selected or changed. The default selection for ypbpr i...

  • Page 45

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 31 1:1 sampling overview in order to scale an image it must first be digitized. This is the process of changing the analog graphics signals (red, green, and blue for example) into pixels stored in the imagepro tm image memor...

  • Page 46

    32 imagepro – multi format image processor manual # 26-0302000-00 / revision e raster box is intentionally “broken” to allow the user to view the input video behind it and align the input video to the raster box precisely. Contrast and brightness the adjustment range is 75.0% to 125.0%. 100% is the ...

  • Page 47

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 33 this menu allows the user to set the input signal aspect ratio. The menu is: the mode value is selected among the following choices: 1:1, 3:2, 4:3, 5:4, 16:9, custom the imagepro will select and display the input video as...

  • Page 48

    34 imagepro – multi format image processor manual # 26-0302000-00 / revision e de-interlacing in order to process an interlaced video source, the imagepro circuits must first de-interlace the image. De- interlacing is the process by which interlaced video (video where even lines are scanned during o...

  • Page 49

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 35 note: configuration parameters entered in the input setup menu are saved in non-volatile memory for each input source by using the save config menu item. If the save config menu item is not selected, the information will ...

  • Page 50

    36 imagepro – multi format image processor manual # 26-0302000-00 / revision e recall config this menu allows the user to recall input configurations that were previously saved for the currently selected input format and type. Only configurations that match the current format and type will be displa...

  • Page 51

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 37 output setup submenu this menu is used to configure the outputs of the imagepro. The output setup menu is illustrated below. This menu can be accessed from the setup menu. Note: configuration parameters entered in this me...

  • Page 52

    38 imagepro – multi format image processor manual # 26-0302000-00 / revision e for the horizontal entries, the unit of measure is pixels. H total indicates the total pixel count per line. H position sets the offset of start of active area from h sync. H active sets the size of the active area. H syn...

  • Page 53

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 39 sync settings submenu this menu allows the user to specify the sync types for the current output. The submenu is illustrated below: the sync out menu item selects among the five possible output sync types: csync, +h+v, +h...

  • Page 54

    40 imagepro – multi format image processor manual # 26-0302000-00 / revision e flicker reduce the flicker reduce value is n/a when the output format is non-interlaced. For interlaced formats, the range is off (no flicker reduction) or +1 (minimum flicker reduction) through +20 (maximum flicker reduc...

  • Page 55

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 41 with imagepro-sdi or imagepro-hd units, when genlock type hv is selected, and the imagepro output is interlaced, the message “for sdi out” is displayed as shown below: h phase the h phase setting allows the output h timin...

  • Page 56

    42 imagepro – multi format image processor manual # 26-0302000-00 / revision e when input auto acquire is on, the system will always perform a full sync acquisition on the input signal anytime the input channel is selected, the input type is changed, or the input signal changes sync rates. When auto...

  • Page 57

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 43 formats submenu this menu is used to define and save a new video format, or to edit and save a previously-defined format. These saved formats are stored in a user library, which is searched during the auto-acquisition pro...

  • Page 58

    44 imagepro – multi format image processor manual # 26-0302000-00 / revision e the field can be selected with the sel button. The content of the field will initially be “format1”. Editing the string is initiated by pressing sel with the > cursor on the editable line. At this point, the > changes to ...

  • Page 59

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 45 if the user picks a name that's already in use in the user library, a confirmation menu is displayed when the user invokes the save command: pressing the sel key will cause the existing library format to be overwritten wi...

  • Page 60

    46 imagepro – multi format image processor manual # 26-0302000-00 / revision e if the format selected for deletion is currently an input format used by any of the input channels or is the input format that is saved in an input configuration, the following screen will be displayed: h,v parameters the...

  • Page 61

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 47 views submenu the views menu allows management of up to 16 stored “views”. A view is a combination of zoom and pan settings. For example, the user may define a view that maps the entire input image to the upper left quart...

  • Page 62

    48 imagepro – multi format image processor manual # 26-0302000-00 / revision e the view to delete is selected from the list of available views. Deleting a view simply resets its pan and zoom settings to their default values. A confirmation screen will appear when sel is pressed. Delete view > view [...

  • Page 63

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 49 effects submenu the effects menu selects the transition effect when switching between input channels. The user may select form the following selections: - transition with image cut; the currently selected channel will be ...

  • Page 64

    50 imagepro – multi format image processor manual # 26-0302000-00 / revision e tech support submenu the version displayed is the installed operating firmware version number. Tech support version phone 866-fri-supt.

  • Page 65

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 51 system submenu this menu allows the user to adjust the vfd brightness and remote control setting for rs-232 or ethernet interfaces as illustrated below. Note: configuration parameters entered in the system menu are saved ...

  • Page 66

    52 imagepro – multi format image processor manual # 26-0302000-00 / revision e the handshake value is selected from the following values: off or on (cts/rts). The reset command restores the rs232 settings to defaults: 38400, n81, handshake on. After connecting the pc com port to the imagepro rs-232 ...

  • Page 67

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 53 valid "nnn" fields can range from 000 to 255. As with any selection line, the user must press the sel button to begin editing the ip values. At this point, the first value is highlighted. Turning the knob moves the value ...

  • Page 68

    54 imagepro – multi format image processor manual # 26-0302000-00 / revision e edid dvi input format submenu this menu allows the user to update the imagepro-hd ™’s edid’s preferred resolution. Note: this menu is for advanced users only. Do not reprogram the edid unless it is necessary. This menu is...

  • Page 69

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 55 press the esc key to proceed with the non-volatile memory programming. Once no dvi source or display device are detected, imagepro will proceed with programming the non-volatile memory while the following message is brief...

  • Page 70

    56 imagepro – multi format image processor manual # 26-0302000-00 / revision e save system state this command explicitly saves all settings in the system state submenu so they may be restored at power up. This command will also save the currently selected input channel as the default input selection...

  • Page 71

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 57 test pattern menu this menu is invoked by pressing the test pat button. The type selection enables a test pattern or turns them off. The value choices are: off h ramp v ramp 100% col bars 75% col bars 16x16 grid 32x32 gri...

  • Page 72

    58 imagepro – multi format image processor manual # 26-0302000-00 / revision e zoom menu this menu is invoked by pressing the zoom button. The default zoom amount is 100%. By selecting amount and pressing sel the user may increase zoom above 100% (zoom into the input video) or decrease zoom below 10...

  • Page 73

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 59.

  • Page 75: Chapter Four

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 61 4 chapter four remote commands what you will find in this chapter… serial command syntax remote commands imagepro tm command list/description model ip-2003 imagepro – multi format image processor.

  • Page 76

    62 imagepro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 77: Serial Command Syntax

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 63 serial command syntax serial parameters the following are the default parameter settings for serial communication. Baud rate is 38.4k. Parity is none. Stop bit is 1. Data bit is 8. For rs-232 signal connections, refer to ...

  • Page 78: Imagepro

    64 imagepro – multi format image processor manual # 26-0302000-00 / revision e imagepro tm remote commands resolution remote commands resh query list of available resolutions resi nn set current input resolution resi? Query input resolution reso nn set output resolution reso? Query output resolution...

  • Page 79

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 65 ismp? In query input sample mode isync in mode set input sync isync? In query input sync isyncslice in nnn set input sync slice threshold isyncslice? In query input sync slice threshold itype in mode set input type itype?...

  • Page 80

    66 imagepro – multi format image processor manual # 26-0302000-00 / revision e ouscn? Query output underscan otpm type raster enables/disables output test pattern and raster box otpm? Query output test pattern and raster box mode ovatv nnnn set output vert active ovatv? Query output vert active ovpo...

  • Page 81

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 67 logo remote commands logod delete currently saved logo image from flash logol load currently saved logo image from flash to logo frame store buffer logos save current output image as logo image to flash logoi query logo r...

  • Page 82: Imagepro

    68 imagepro – multi format image processor manual # 26-0302000-00 / revision e imagepro tm command list/description resolution remote commands command: resh description: query the available resolution list for the imagepro. Parameters: none returns: all available resolutions in the format: n : hxv @...

  • Page 85

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 71 iclist description: lists the names of all saved input configurations. Parameters: none returns: list the names of saved input configurations, one name per line. Example: iclist (lists all saved input configurations.) com...

  • Page 86

    72 imagepro – multi format image processor manual # 26-0302000-00 / revision e = mode example: icsp 1 2 (sets ypbpr input colorspace to beta for channel 1) icsp? 2 (queries channel 2 for input colorspace.) command: iedge in edge nnnn description: set input edge in oversample mode. The minimum and ma...

  • Page 87

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 73 nnnn - input horizontal position: nnnn[(input h sync) - +(h total - h active)] query: ihpos? In returns the input horizontal position in the format = nnnn example: ihpos 1 296 (set input horizontal position for channel 1 ...

  • Page 89

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 75 isyncslice in nnn description: adjusts the input sync slice threshold selection. Parameters: in - input chnl [1-3] nnn - sync slice threshold [20 – 280mv (in steps of 10)] query: isyncslice? In returns the input sync slic...

  • Page 90

    76 imagepro – multi format image processor manual # 26-0302000-00 / revision e example: ivtotal? (queries input vertical total) command: ivrec in description: input channel view recall. Parameters: in - input chnl (1-4) chnl 4 only for imagepro-sdi and imagepro-hd units example: ivrec 1 (recalls inp...

  • Page 92

    78 imagepro – multi format image processor manual # 26-0302000-00 / revision e parameters: none example: ocrst (reset output configuration) command: ocsav description: save output configuration to non-volatile memory. Parameters: none example: ocsav (save output configuration) command: ocsp mode des...

  • Page 93

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 79 command: ohatv nnnn description: set output horizontal active. The minimum and maximum limit is dependent on the output resolution. Parameters: nnnn - output horizontal active: nnnn[ (actual output h active * 2/10, with a...

  • Page 94

    80 imagepro – multi format image processor manual # 26-0302000-00 / revision e command: ohue nnn description: adjust output hue. Only applicable if output is ntsc. N/a if pal parameters: nnn - output hue (-22.0 - +22.0) query: ohue? Returns the output hue value in the format = nnn example: ohue 20 (...

  • Page 96

    82 imagepro – multi format image processor manual # 26-0302000-00 / revision e of 150) - +(actual output v active *6/5, with absolute maximum value of output v total – output v sync)] query: ovatv? Returns the output vertical active value in the format = nnnn example: ovatv 768 (set output vertical ...

  • Page 97

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 83 edit custom format remote commands command: eflist description: lists the names of all saved custom formats. Parameters: none returns: list the names of saved custom formats, one name per line. Example: eflist (lists all ...

  • Page 98

    84 imagepro – multi format image processor manual # 26-0302000-00 / revision e command: efhatv nnnn description: set custom format’s horizontal active value. Parameters: nnnn - h active [500 - +(h total - h sync - h front porch)] query: efhatv? Returns the custom format’s horizontal active value in ...

  • Page 99

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 85 command: efvatv nnnn description: set custom format’s vertical active value. Parameters: nnnn - v active [400 - +( v total - v sync - v front porch)] query: efvatv? Returns the custom format’s vertical active value in the...

  • Page 100

    86 imagepro – multi format image processor manual # 26-0302000-00 / revision e efdel filename description: deletes saved custom format. This filename is translated to all upper case characters parameters: filename – name of custom format to be deleted (translated to upper case). Example: efdel forma...

  • Page 103

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 89 logo remote commands command: logod description: delete logo image from non-volatile memory. Selecting black/logo channel will now display black. Logo feature only available on imagepro-sdi and imagepro-hd. Parameters: no...

  • Page 104

    90 imagepro – multi format image processor manual # 26-0302000-00 / revision e effects remote commands command: trn type in description: selects transition type when switching between inputs. Transition delay is only applicable if the transition type selected is fade to black / fade to logo. Fade to...

  • Page 105

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 91 pan / zoom / view remote commands command: panh nnn.N description: set output horizontal pan. Parameters: nnn.N - horizontal pan (-100.0% - +100.0%) query: panh? Returns the output horizontal pan value in the format = nnn...

  • Page 106

    92 imagepro – multi format image processor manual # 26-0302000-00 / revision e command: viewr nn description: recall view parameters: nn – view index [0 - 15]. Index 0 is default view (i.E. Zoom = 100%, pan h = 0%, pan v = 0%) example: viewr 1 (recall saved view 1.) command: views nn description: sa...

  • Page 107

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 93.

  • Page 109: Chapter Five

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 95 5 chapter five software upgrade instructions what you will find in this chapter… software upgrade instructions model ip-2003 imagepro – multi format image processor.

  • Page 110

    96 imagepro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 111

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 97 software upgrade instructions overview the imagepro units incorporate the system software in a flash memory component. Flash memory allows easy field upgrades without the need to send the unit back to the factory. The loa...

  • Page 112

    98 imagepro – multi format image processor manual # 26-0302000-00 / revision e 2. Find the folsom research folder and select imagepro flash file loader. Preparing to upgrade the imagepro unit 1. Plug the db-9 male connector into the port labeled “rs-232 on the back of the imagepro unit. 2. Make sure...

  • Page 113: Chapter Six

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 99 6 chapter six barco folsom information what you will find in this chapter… warranty rma information technical support/general contact information model ip-2003 imagepro – multi format image processor.

  • Page 114

    100 imagepro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 115: Barco Folsom Information

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 101 barco folsom information barco folsom warranty all video products are designed and tested to the highest quality standards and are backed by a full 3-year parts and labor warranty. Warranties are effective upon delivery ...

  • Page 116

    102 imagepro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 117: Appendix

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 103 a appendix technical specifications model ip-2003 imagepro – multi format image processor.

  • Page 118

    104 imagepro – multi format image processor manual # 26-0302000-00 / revision e.

  • Page 119: Technical Specifications

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 105 technical specifications video input inputs: universal inputs: (3) high bandwidth video channels support, rgbhv/rgbs/rgsb computer video, component video (std or hdtv), s-video, or composite video connectors: input 1 and...

  • Page 120

    106 imagepro – multi format image processor manual # 26-0302000-00 / revision e user control local: user-friendly front panel interface ethernet connection (with tcp/ip) or rs-232 serial port for real-time control physical height: 1.5"; width: 17" (43.2 cm) or 19" (48.3 cm) with rack-mount option; d...

  • Page 121

    Manual # 26-0302000-00 / revision e imagepro – multi format image processor 107 fcc classification this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against...