Barco Magik II Specifications

Page of 2

Download

Bookmark us

Magik II

Universal VGA Interface

Barco’s Magik II is an easy-to-use very

high RGB bandwidth interface to

connect any IG (including IBM-

compatible and Apple computers) to a

presentation device such as a projector or

a professional data monitor.

Wide compatibility

The Magik II makes it capable of handling all types of PC graphics standards ranging

from VGA up to at least QXGA resolution (2,048 x 1,532) coming from an IG,

including PC or Mac and connect them to a projector or professional monitor.

•

Very high bandwidth of 300 MHz (at -3dB)

•

Compatibility from VGA (640 x 480) up to QXGA resolution (2,048 x 1,532)

•

Auto-ranging Power Supply (87 to 240 V AC, 50/60Hz)

Easy-to-use intelligent interface

Most of the adjustments of the interface are aligned automatically or selected very

easily.

•

Automatic Sync Input and Output detection (LED indication for sync signal)

•

Automatic termination to 75 Ohm of RGB signals from the computer and TTL/Sync

signals with a 22K pull-up resistor

Easy to install

The accompanying mounting bracket facilitates installation in any enclosure,

underneath tables and against walls.

Magik II 17-05-2004 15:40 Pagina 1

Page 1
Magik ii universal vga interface barco’s magik ii is an easy-to-use very high rgb bandwidth interface to connect any ig (including ibm- compatible and apple computers) to a presentation device such as a projector or a professional data monitor. Wide compatibility the magik ii makes it capable of han...
Page 2
Features and specifications inputs • rgb analog on 5 bnc • signal levels: r, g, b: 0.7 vpp (no sync) or 1 vpp with sync @ 75 ohm • sync: ttl@22k load/analog outputs • rgb analog on 5 bnc connectors (to projector or monitor): r, g, b: 0.7 vpp (no sync) or 1 vpp with sync @ 75 ohm h, v or csync: 1.54 ...