1. DL manuals
  2. Barco
  3. Network Router
  4. MatrixPRO-II 3G/HD/SD-SDI
  5. User Manual

Barco MatrixPRO-II 3G/HD/SD-SDI User Manual

Manual is about: MatrixPRO-II HD/3G SDI series

Summary of MatrixPRO-II 3G/HD/SD-SDI

  • Page 1

    O manual #: 26-0903001-00 o revision: 01.1 matrixpro-ii hd/3g sdi series user manual rev. 1.1.

  • Page 2

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 2 copyright © barco. March 09, 2011 all rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system...

  • Page 3

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 3 absence of properties guaranteed in writing or due to the intent or gross negligence or part of barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by barc...

  • Page 4

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 4 company address barco, inc. 11101 trade center drive rancho cordova, california 95670 usa phone: (916) 859-2500 fax: (916) 859-2515 barco n.V. Noordlaan 5 8520 kuurne belgium phone: +32 56.36.82.11 fa...

  • Page 5

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 5 operators safety summary the general safety information in this summary is for operating personnel. Do not remove panels or covers there are no user-serviceable parts within the unit. Removal of the t...

  • Page 6

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 6 terms in this manual and equipment marking warning highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of perso...

  • Page 7

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 7 change history date ecp # description approved by 0.0 5/20/10 578607 user’s guide gkou 1.1 3/09/11 586286 added default ip address added interface commands appendix added mp-ii 3g configuration tool g...

  • Page 8

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 8 contents 1.1 product versions ..................................................................................................... 10 2 specifications ...................................................

  • Page 9

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 9 b.2 request x-point status ....................................................................................................... 31 b.3 router ping .....................................................

  • Page 10

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 10 product overview this user manual presents the features, installation and operation procedures of (3g/hd/sd- sdi) routers of the barco matrixpro-ii series. − router models available: 8x8, 16x16 and 3...

  • Page 11

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 11 2 specifications 2.1 mechanics dimensions: - hxwxd = 44x483x50mm, (19”, 1ru); - hxwxd = 88x483x50mm, (19”, 2ru); safety/emission standards: compliant with ce en55103-1 and 2. 2.1.1 weight and power c...

  • Page 12

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 12 2.4 video specifications supported formats: broadcast: - 270mbps – 2.97gbps; - dvb-asi, smpte 259m, smpte 292m, smpte 424m; - 2k, 2048x1556/23.98 and 24. Electrical signal inputs: standard: smpte 259...

  • Page 13

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 13 field selectivity: field 1. Timing range: • sd, pal: within clock-intervals (27mhz) 565 – 835 line 6 • sd, ntsc: within clock-intervals (27mhz) 565 – 835 line 10. • hd tri-level: 1280x720: within clo...

  • Page 14

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 14 3 configuration this chapter provides an overview of the configuration options that are available on the barco matrixpro-ii 3g/hd/sd-sdi routers. 3.1 sw1 – sw4: address/level not used 3.2 sw5-sw6: ro...

  • Page 15

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 15 − 2 layers, based on an 8x8 router: layer 1 input layer 1 output 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 layer 2 input layer 2 output 1 5 1 5 2 6 2 6 3 7 3 7 4 8 4 8 − 2 layers, based on a 16x16 router: laye...

  • Page 16

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 16 − 3 layers, based on a 16x16 router: layer 1 input layer 1 output 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 layer 2 input layer 2 output 1 6 1 6 2 7 2 7 3 8 3 8 4 9 4 9 5 10 5 10 layer 3 input layer 3 ...

  • Page 17

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 17 in-/outputs 31 and 32 are not in use in this router setup (3 router layers, based on a 32x32 router). − 4 layers, based on an 8x8 router: layer 1 input layer 1 output 1 1 1 1 2 2 2 2 layer 2 input la...

  • Page 18

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 18 layer 2 input layer 2 output 1 9 1 9 2 10 2 10 … … … … 8 16 8 16 layer 3 input layer 3 output 1 17 1 17 2 18 2 18 … … … … 8 24 8 24 layer 4 input layer 4 output 1 25 1 25 2 26 2 26 … … … … 8 32 8 32 ...

  • Page 19

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 19 3.5 switching time switching is performed according to the detected sync reference signal. Switching time is determined by the synchronization signal that feeds the router. This is useful when the vi...

  • Page 20

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 20 4 led status indication 4.1 start-up the led located at the front of the router indicates the status of the router. At start-up, the led will alternate between red (r) and green (g) every 500ms for a...

  • Page 21

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 21 5 router communication you gain access to router for communication purposes by connecting either the router’s serial port to your computer or by using an ethernet connection. Do not use both the rout...

  • Page 22

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 22 5.2 ethernet connection the connections follow the standard set by the ieee 802.3 100basetx specification. The cables that are to be applied should be cat-5 / cat-5e standard, or better. It is the re...

  • Page 23

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 23 6 control panel operation 6.1 button description a/v toggle the a/v toggle button enables/disables audio and video on a specified address. The address can either be read from the dip switches, or be ...

  • Page 24

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 24 take on/off the take on/off button enables or disables the take button. If no take button is defined, take on/off is always off. On first start-up the take button is enabled. Later it will read the l...

  • Page 25

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 25 7 environmental specifications 1. The equipment will meet the guaranteed performance specification under the following environmental conditions: - operating room temperature range: 0°c to 45°c - oper...

  • Page 26

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 26 appendix a a.1 materials declaration for product sold into china after 1st march 2007, we comply with the “administrative measure on the control of pollution by electronic information products”. In t...

  • Page 27

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 27 a.2 recycling information please contact barco’s customer support for assistance with recycling if this site does not show the information you require. Where it is not possible to return the product ...

  • Page 28

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 28 a.3 declarations of conformity description 3g/hd/sd-sdi video routers in the barco matrixpro-ii series directives this equipment complies with lvd 73/23/eec emc 2004/108/eec harmonised standards appl...

  • Page 29

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 29 appendix b remote commands description x x-point take. Ls status x-point – level. Ping router ping. Llist level list default address: 192.168.0.245 port: 4381 connection to the router will be lost af...

  • Page 30

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 30 b.1 x-point take this command directly takes the specified x-point. The command specifies which sources to connect to which destinations and on what levels. Several x-point takes can be specified on ...

  • Page 31

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 31 a single x-point take command can switch multiple x-points. You will however receive one response for each x-point that is switched. Example: command echo desired action x l1 1 12 x l1 1 12 switch in...

  • Page 32

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 32 b.3 router ping this command is used to check if the router is still responding. Command: ping[*cc] response: ? "ping" pong [*cc] example: command echo desired action ping pong b.4 level list this co...

  • Page 33

    Matrixpro-ii 3g/hd/sd-sdi routers rev. 1.1 matrixpro-ii hd/3g sdi series –user’s guide - rev. 1.1 33 appendix c barco mpii-3g configuration tool the barco mpii-3g tool is a software utility that allows the user to: • read the ip settings • modify and save ip settings • switching the communication be...