RëÉêÛë=dìáÇÉ nsñns=~åÇ=uñu=ealpajpaf=oçìíÉê • manual # 26-0401000-00 • revision a • june 29, 2005.
Ii matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide nsñns=~åÇ=uñu=ealpajpaf=oçìíÉê=√=rëÉêÛë=dìáÇÉ `çéóêáÖÜí © barco, inc. June 29, 2005 all rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retri...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide iii if the purchaser or a third party carries out modifications or repairs on goods delivered by barco, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of r...
Iv matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide léÉê~íçêë=p~ÑÉíó=pìãã~êó the general safety information in this summary is for operating personnel. Aç=kçí=oÉãçîÉ=`çîÉêë=çê=m~åÉäë there are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide v qÉêãë=få=qÜáë=j~åì~ä=~åÇ=bèìáéãÉåí=j~êâáåÖ= t^okfkd highlights an operating procedure, practice, condition, statement, etc., which, if not strictly observed, could result in injury to or death of personnel. `^rqflk the exclamation point wit...
Vi matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide `Ü~åÖÉ=eáëíçêó the table below lists the changes to the 16x16 and 8x8 hd/sd-sdi router user’s guide. Table 0-1. Change history rev date eco # description approved by 01 6/9/04 initial release l. Gilstrom 05 3/28/05 updates p. Norton a 6/29...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide vii q~ÄäÉ=çÑ=`çåíÉåíë `Ü~éíÉê=n fåíêçÇìÅíáçå =k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k= n in this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Viii matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide table of contents `Ü~éíÉê=q drf=fåëí~ää~íáçå=~åÇ=léÉê~íáçå k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=k=pn in this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 control gui ...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide ix table of contents matrixpro serial command list/description . . . . . . . . . . . . . . . . . . . 66 help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 clear . . . . . . . . . . . . . . . . . . . ...
X matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide table of contents.
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 1 nk==fåíêçÇìÅíáçå få=qÜáë=`Ü~éíÉê this chapter is designed to introduce you to the matrixpro™ 16x16 and 8x8 hd/sd-sdi router user’s guide. Areas to be covered are: • chapter structure • how to use this guide • conventions • about the matrixp...
2 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide nk==fåíêçÇìÅíáçå chapter structure `Ü~éíÉê=píêìÅíìêÉ the following chapters provide instructions for all aspects of matrixpro 16x16 and 8x8 hd/sd-sdi router operations: • chapter 1, “ introduction ” provides a system overview, a list of fea...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3 nk==fåíêçÇìÅíáçå how to use this guide eçï=íç=rëÉ=qÜáë=dìáÇÉ following are important tips for streamlining your use of this user’s guide in its electronic “pdf” form. K~îáÖ~íáåÖ use acrobat reader’s “bookmarks” to navigate to the desired lo...
4 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide nk==fåíêçÇìÅíáçå about the matrixpro ^Äçìí=íÜÉ=j~íêáñmol the matrixpro 16x16 digital router is available in hd-sdi or sd-sdi versions: • the hd-sdi router can route hd-sdi, adhering to smpte 292 or sd-sdi signals adhering to smpte 259. • th...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 5 nk==fåíêçÇìÅíáçå technical description qÉÅÜåáÅ~ä=aÉëÅêáéíáçå the matrixpro serial digital switcher is available in three versions. • the 16x16 hd-sdi is a serial digital matrix switcher adhering to smpte 292m and smpte 259m with 16 inputs a...
6 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide nk==fåíêçÇìÅíáçå technical description.
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 7 ok==e~êÇï~êÉ=fåëí~ää~íáçå få=qÜáë=`Ü~éíÉê this chapter provides detailed instructions for installing the matrixpro 16x16 and 8x8 hd/ sd-sdi router hardware. The following topics are discussed: • safety precautions • unpacking and inspection...
8 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 2. Hardware installation safety precautions p~ÑÉíó=mêÉÅ~ìíáçåë= for all matrixpro 16x16 and 8x8 hd/sd-sdi router installation procedures, observe the following important safety and handling rules to avoid damage to yourself and the equipmen...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 9 2. Hardware installation rear panel connectors oÉ~ê=m~åÉä=`çååÉÅíçêë the figures below illustrate the matrixpro 16x16 and 8x8 rear panels: figure 2-1. Matrixpro 16x16 hd-sdi and sd-sdi rear panel figure 2-2. Matrixpro 8x8 hd-sdi rear panel ...
10 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 2. Hardware installation rack-mount installation o~Åâjjçìåí=fåëí~ää~íáçå matrixpro 16x and 8x digital router units are designed to be rack mounted. Please note the following important points: • when rack mounting the unit, remember that ma...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 11 2. Hardware installation power cord/line voltage selection mçïÉê=`çêÇliáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå the matrixpro 16x matrix switcher performs line voltage selection automatically. No user controls are required for line voltage selection. The ac ...
12 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 2. Hardware installation video input/output connections sáÇÉç=fåéìíllìíéìí=`çååÉÅíáçåë the figure below illustrates the input and output connectors on the 16x16 panel: figure 2-1. Matrixpro 16x16 input/output connectors the figure below il...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 13 pk==léÉê~íáçå få=qÜáë=`Ü~éíÉê this chapter provides detailed operating instructions for the matrixpro 16x16 and 8x8 hd/ sd-sdi routers. The following topics are discussed: • control overview • matrixpro power-up initialization • matrixpro ...
14 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3. Operation control overview `çåíêçä=lîÉêîáÉï this portion of the manual outlines how to control all matrixpro functions. There are many means to control the unit available to the user. • first, the front panel is available for status and...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 15 3. Operation matrixpro front panels j~íêáñmol=cêçåí=m~åÉäë on the matrixpro 16x and 8x routers, the front panel allows local control and monitoring of the matrix switcher. The figures below illustrate the matrixpro 16x16 and 8x8 front pane...
16 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3. Operation matrixpro front panels 3) input crosspoint selection buttons at the right-side of the front panel, the 8x and 16x routers each have a set of eight input selection switches on the top row. On the 16x only, unshifted input butto...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 17 3. Operation menu structure jÉåì=píêìÅíìêÉ this section illustrates and explains all the menus in the matrixpro’s menu structure, in the order in which they appear. The following topics are discussed: • menu tree • main menu • setup menu •...
18 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3. Operation menu structure jÉåì=qêÉÉ the figure below illustrates the matrixpro menu tree. Use this diagram for reference as you learn the menu structure. Figure 3-3. Matrixpro menu tree setup menu status menu reclocking menu vertical swi...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 19 3. Operation menu structure j~áå=jÉåì the figure below illustrates the main menu, which contains six items. Each of these items contains at least one sub-menu. Figure 3-4. Matrixpro main menu please note the following important rules regar...
20 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3. Operation menu structure pÉíìé=jÉåì from the main menu, select setup to display the setup menu. Figure 3-5. Matrixpro setup menu each menu is explained in detail below: • system menu • factory reset menu • tech support menu póëíÉã=jÉåì ...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 21 3. Operation menu structure sca=_êáÖÜíåÉëë=jÉåì from the system menu, select vfd brightness to adjust the vacuum fluorescent display (vfd) brightness. To change brightness: 1. Press sel , then rotate the selector knob until the desired bri...
22 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3. Operation menu structure please note: • when selecting the baud rate for either rs-232 or rs-485, the user has these choices: 1200, 2400, 9600, 38400, 57600. • when selecting the byte format, the user has these choices: ~ n81, (one star...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 23 3. Operation menu structure 4. To “accept” the new ip address, press esc at any time to exit the edit mode. The new ip address will take effect at this point. PóëíÉã=p~îÉ from the system menu, select system save to save all settings except...
24 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3. Operation menu structure qÉÅÜ=pìééçêí=jÉåì from the setup menu, select tech support to display the tech support menu. Figure 3-12. Matrixpro tech support menu the tech support menu shows the installed version of software, as well as the...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 25 3. Operation menu structure oÉÅäçÅâáåÖ=jÉåì from the main menu, select reclocking to display the reclocking control menu, as illustrated below. Figure 3-14. Matrixpro reclocking control menu the system’s reclocking circuits clean up margin...
26 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3. Operation menu structure sÉêíáÅ~ä=fåíÉêî~ä=pïáíÅÜáåÖ=jÉåì from the main menu, select vertical switch to display the vertical interval switching menu, as illustrated below. Figure 3-15. Matrixpro vertical interval switching menu the sour...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 27 3. Operation menu structure oÉÅ~ää=mêÉëÉíë=jÉåì from the main menu, select recall to display the recall presets menu, as illustrated below. Figure 3-17. Matrixpro recall presets menu there are eight video signal configuration presets that ...
28 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3. Operation control of digital video switching `çåíêçä=çÑ=aáÖáí~ä=sáÇÉç=pïáíÅÜáåÖ======= use the following steps to perform a switch: 1. Select an output channel (destination) from among the lower eight output buttons. On the 16x only, us...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 29 3. Operation establishing groups of inputs and outputs bëí~ÄäáëÜáåÖ=dêçìéë=çÑ=fåéìíë=~åÇ=lìíéìíë the matrixpro routers can be set up to "lock-out" input sources that are incompatible with certain output display devices. S example: input ch...
30 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 3. Operation establishing groups of inputs and outputs use the following steps to remove a member of an input/output group: 1. Press and hold any output key other than the one to be removed, if that is the case. 2. Press and release the ke...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 31 qk==drf=fåëí~ää~íáçå=~åÇ=léÉê~íáçå få=qÜáë=`Ü~éíÉê this chapter describes the installation and operation of the matrixpro interactive control gui. The following topics are discussed: • control gui installation • equipment setup • remote et...
32 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 4. Gui installation and operation control gui installation `çåíêçä=drf=fåëí~ää~íáçå the matrixpro control gui is an interactive graphical user interface application designed to assist users with matrixpro operation. There are two ways to o...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 33 4. Gui installation and operation control gui installation 2. Click next to display the choose destination dialog: figure 4-2. Choose destination dialog the default install directory is c:\folsom research\matrixpro\mpcontrol. ~ click brows...
34 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 4. Gui installation and operation control gui installation 4. Click next to begin file transfer. 5. After successfully transferring the file to the directory specified, the installation complete dialog appears: figure 4-4. Installation com...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 35 4. Gui installation and operation equipment setup bèìáéãÉåí=pÉíìé use the following steps to set up equipment: 1. Connect the input and output sources on the matrixpro. 2. Connect the matrixpro remote port to an available serial (rs-232) p...
36 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 4. Gui installation and operation gui operation drf=léÉê~íáçå as with all barco folsom products, if the hardware is populated or functionality is enabled, the control "keys" will be labelled in black. If channels of hardware are not popula...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 37 4. Gui installation and operation gui operation sáÇÉç=pïáíÅÜáåÖ=q~Ä use the following steps to utilize the video switching tab: 1. Click on the video switching tab on the gui page. A sample tab is shown below. Figure 4-5. Video switching t...
38 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 4. Gui installation and operation gui operation of the assigned output route, but the input channel assigned to that particular output channel can be read in the green box. 5. To cancel an input/output assignment, click the cancel key. 6. ...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 39 4. Gui installation and operation gui operation i~ÄÉäáåÖ=q~Ä click the labeling tab on the matrixpro control application. A sample tab is shown below: figure 4-6. Labeling tab (sample) this tab allows the user to assign a name to any input...
40 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 4. Gui installation and operation gui operation dêçìéáåÖ=q~Ä click the grouping tab on the matrixpro control application. A sample tab is shown below: figure 4-7. Grouping tab (sample) the matrixpro routers can be set up to "lock-out" inpu...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 41 4. Gui installation and operation gui operation 4. Select the next group number index in the group column. The keys of the original group 1 outputs will be grayed-out — indicating that they are no longer available to assign to another grou...
42 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 4. Gui installation and operation gui operation pÉèìÉåÅáåÖ=q~Ä click the sequencing tab on the matrixpro control application. A sample tab is shown below: figure 4-8. Sequencing tab (sample) the sequencing tab enables you to cycle through ...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 43 4. Gui installation and operation gui operation use the following steps to perform a sample sequence: 1. Two presets were configured and loaded earlier in this tutorial. Refer to the “ preset save and recall ” section for details. 2. Be su...
44 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 4. Gui installation and operation gui operation pÉíìé=q~Ä click the setup tab on the matrixpro control application. A sample tab is shown below: figure 4-9. Setup tab (sample) the setup tab allows the user to select the method of matrixpro...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 45 4. Gui installation and operation gui operation qÜÉ=?^Äçìí?=q~Ä click the about tab on the matrixpro control application. A sample tab is shown below: figure 4-10. About tab (sample) this page shows the current gui software revision as wel...
46 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 4. Gui installation and operation gui operation.
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 47 rk==^ééäáÅ~íáçå=péÉÅáÑáÅ=`çååÉÅíáçåë få=qÜáë=`Ü~éíÉê this chapter provides system connectivity information. The following topics are discussed: • connectivity diagram.
48 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 5. Application specific connections connectivity diagram `çååÉÅíáîáíó=aá~Öê~ã the figure below provides a sample connectivity diagram: figure 5-1. Matrixpro connectivity diagram (sample) note that the matrixpro digital switcher product lin...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 49 sk==réÖê~ÇáåÖ=pçÑíï~êÉ få=qÜáë=`Ü~éíÉê this chapter provides detailed instructions for upgrading system software components. The following topics are discussed: • overview • hardware requirements • software requirements • connecting to bar...
50 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 6. Upgrading software overview lîÉêîáÉï the matrixpro units built by barco folsom incorporate system software in a flash memory component. Flash memory allows easy software upgrades, without the need to send the unit back to the factory. T...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 51 6. Upgrading software connecting to barco folsom `çååÉÅíáåÖ=íç=_~êÅç=cçäëçã= • barco folsom's ftp site address is: ftp.Folsom.Com • if you are using an ftp client, logon to our site using "anonymous" for the user name and your email addres...
52 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 6. Upgrading software preparing to upgrade the matrixpro mêÉé~êáåÖ=íç=réÖê~ÇÉ=íÜÉ=j~íêáñmol use the following steps to prepare to upgrade the matrixpro 16x and 8x: 1. Plug the db-25 male connector into the port labeled rs-232/485 on the ba...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 53 6. Upgrading software uploading files to matrixpro réäç~ÇáåÖ=cáäÉë=íç=j~íêáñmol use the following steps to upload files to the matrixpro system: 1. Once communications have been established and verified, click on the "open script file to r...
54 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 6. Upgrading software uploading files to matrixpro.
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 55 ^k==péÉÅáÑáÅ~íáçåë få=qÜáë=^ééÉåÇáñ this appendix provides detailed technical specifications for the matrixpro 16x16 and 8x8 hd/sd-sdi router. The following topics are provided: • sdi specifications • hd/sdi specifications • common specifi...
56 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide ^k==péÉÅáÑáÅ~íáçåë sdi specifications paf=péÉÅáÑáÅ~íáçåë= the table below lists matrixpro sdi specifications. Table a-1. Matrixpro sdi specifications parameter detail specification video input number/signal type 16 unbalanced serial data c...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 57 ^k==péÉÅáÑáÅ~íáçåë hd/sdi specifications ealpaf=péÉÅáÑáÅ~íáçåë= the table below lists matrixpro hd/sdi specifications. Table a-2. Matrixpro hd/sdi specifications parameter detail specification video input number/signal type 16 unbalanced s...
58 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide ^k==péÉÅáÑáÅ~íáçåë common specifications `çããçå=péÉÅáÑáÅ~íáçåë= the table below lists common matrixpro specifications. Table a-3. Matrixpro common specifications parameter detail specification vref sync input source channel 1 input control...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 59 _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä få=qÜáë=^ééÉåÇáñ this appendix provides information regarding external remote control protocol. The following topics are discussed: • default serial parameters • rs-232/485 remote control connections • rs-232 mo...
60 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä default serial parameters aÉÑ~ìäí=pÉêá~ä=m~ê~ãÉíÉêë the following are the parameter settings for serial communication: • baud rate = 57600 baud • parity = none • stop bit = 1 • data bit = 8 • echo = on • flow co...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 61 _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä rs-232/485 remote control connections opjopolqur=oÉãçíÉ=`çåíêçä=`çååÉÅíáçåë the rs-232 or rs-485 serial port can be connected to a computer to support remote control of the matrixpro unit. The electronics indust...
62 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä rs-232 mode opjopo=jçÇÉ the matrixpro will respond with a “#” prompt when the command processor is ready for a command. The command syntax is shown below cmd arg1 arg2 … argn please note: • a space (ascii 32) mu...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 63 _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä rs-485 mode opjqur=jçÇÉ to switch to rs-485, refer to the “ rs-232 settings menu ” section in chapter 3. Single commands will be combined with a command delimiter start, device number, command separator and comm...
64 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä rs-485 mode is not exceeded before completion of the last command string. To minimize bus traffic the command words should be kept as short as possible. The units will not respond with prompts or any command err...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 65 _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä matrixpro remote commands j~íêáñmol=oÉãçíÉ=`çãã~åÇë the table below lists matrixpro remote commands. Click the hyperlink for detailed descriptions and examples. Table b-4. Matrixpro remote commands command descr...
66 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä matrixpro remote commands j~íêáñmol=pÉêá~ä=`çãã~åÇ=iáëílaÉëÅêáéíáçå ebim • description: displays a list of available commands on a terminal emulator such as procomm or hyperterminal. • parameters: none s example...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 67 _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä matrixpro remote commands d`ib^o=Öêé • description: clears the selected grouping information. • parameters: grp group number to clear; [1-16] s example: gclear 1 (clears the grouping information in group number ...
68 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä matrixpro remote commands il^aojm • description: places unit into loader mode. This mode is used to perform field upgrades • parameters: none. S example: loadrmp (puts unit into loader mode.) l_ikh=çìí=Ääåâ • de...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 69 _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä matrixpro remote commands mpq^q • description: displays preset information (i.E. Preset valid, which input video/ audio # routed, audio level, etc). • parameters: out preset number; [1 - 16] s examples: pstat 1 ...
70 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä matrixpro remote commands oqbjm=çìí=áå • description: routes input to output. If the output is in a group, all the outputs in the group will be routed to the input specified. If the output is in a i/o group but ...
72 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide _k==oÉãçíÉ=`çåíêçä=mêçíçÅçä matrixpro remote commands.
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 73 `k==`çåí~Åí=fåÑçêã~íáçå få=qÜáë=^ééÉåÇáñ the following topics are discussed in this appendix: • barco folsom warranty • return material authorization (rma) • barco events contact information _~êÅç=cçäëçã=t~êê~åíó all video products are des...
74 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide `k==`çåí~Åí=fåÑçêã~íáçå barco events contact information _~êÅç=bîÉåíë=`çåí~Åí=fåÑçêã~íáçå barco events usa/barco folsom, llc • 11101 trade center drive rancho cordova, california 95670 usa • phone: (916) 859-2500 • fax: (916) 859-2515 • we...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 75 fåÇÉñ kìãÉêáÅë 16x16 hd-sdi . . . . . . . . . . . . . . . . . . . . . . . . . .5 16x16 sd-sdi . . . . . . . . . . . . . . . . . . . . . . . . . .5 8x8 hd-sdi . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ^ about matrixpro . . . ...
76 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide index double-cursor . . . . . . . . . . . . . . . . . . . . . . . . .19 downloading files, software upgrade . . . . . . . .51 b encore presentation system . . . . . . . . . . . . . . .5 equipment marking terms . . . . . . . . . . . . . . ....
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 77 index installed version of software . . . . . . . . . . . . . .24 introduction to matrixpro . . . . . . . . . . . . . . . . .1 ip address default . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 menu . . . . . . . . . . . . . . . ...
78 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide index reclockers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 reclocking control menu . . . . . . . . . . . . . . . . .25 remote commands, matrixpro . . . . . . . . . . . . . .65 connections . . . . . . . . . . . . . . . . . ...
Matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide 79 index setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 video switching . . . . . . . . . . . . . . . . . . . . .37 take button . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 serial command . . . . . . . . . . . ...
80 matrixpro • 16x16 and 8x8 hd/sd-sdi router • user’s guide index.