1. DL manuals
  2. Barco
  3. Monitor
  4. MDNC-2221
  5. User Manual

Barco MDNC-2221 User Manual - 3.7

Manual is about: NIO 2MP LED Display

Summary of MDNC-2221

  • Page 1

    Nio 2mp led display user guide mdnc-2221 k5903058/01 04/03/2014.

  • Page 2

    Barco nv president kennedypark 35, 8500 kortrijk, belgium phone: +32 56.23.32.11 fax: +32 56.26.22.62 support: www.Barco.Com/esupport visit us at the web: www.Barco.Com printed in belgium.

  • Page 3: Table Of Contents

    Table of contents table of contents 1. Welcome! .......................................................................................... 3 1.1 about the product ............................................................................................. 3 1.2 what’s in the box.......................

  • Page 4

    Table of contents 2 k5903058 nio 2mp led display 04/03/2014.

  • Page 5: 1. Welcome!

    1. Welcome! 1. Welcome! 1.1 about the product overview thank you for choosing this nio 2mp led display! Nio 2mp led display is an industry-standard 2mp color display system with led backlights for depend- able diagnostic viewing in high-bright color. Nio 2mp led display provides an effective display...

  • Page 6

    1. Welcome! Keep your original packaging. It is designed for this display and is the ideal protection during transport and storage. 4 k5903058 nio 2mp led display 04/03/2014.

  • Page 7: 2. Parts, Controls And

    2. Parts, controls and connectors 2. Parts, controls and connectors 2.1 display front view overview 1 2 4 5 6 3 image 2-1 front view 1 left key 4 standby key 2 right key 5 power leds 3 menu key 6 bottom downstream usb the key icons are displayed above the keys, adapted to the function that it is use...

  • Page 8: 2.2

    2. Parts, controls and connectors 2.2 display rear view connector compartment cover closed 1 2 3 4 image 2-2 rear view with closed connector compartment cover 1 connector compartment cover 3 foot lock clip 2 cable duct 4 tilt & swivel foot 6 k5903058 nio 2mp led display 04/03/2014.

  • Page 9

    2. Parts, controls and connectors connector compartment cover open 1 2 3 4 5 image 2-3 1 +24 vdc power input 4 dvi video input 2 usb downstream connector 5 displayport video input 3 usb upstream connector k5903058 nio 2mp led display 04/03/2014 7.

  • Page 10

    2. Parts, controls and connectors 8 k5903058 nio 2mp led display 04/03/2014.

  • Page 11: 3. Display Installation

    3. Display installation 3. Display installation prior to installing your nio 2mp led display and connecting all necessary cables, make sure to have a suitable display controller physically installed in your computer. If you are using a barco display controller, please consult the user guide delivere...

  • Page 12: 3.3

    3. Display installation if, after installing the display of the system, you change the panel orientation while an image is on the screen, the result depends on the graphic board and the resolution of the image. In some cases the image will be rotated automatically, in other cases it will not be rota...

  • Page 13

    3. Display installation 1. Connect the dvi or dp of the display controller to the dvi or dp connector of the display. 2. If you want to make use of the display’s usb upstream connector, connect a pc usb downstream connector to the display’s usb upstream connector. 3. If you have chosen to use the di...

  • Page 14: 3.5

    3. Display installation 3.5 routing the cables & reattach the connector compartment cover to route the cables 1. Route all connected cables through the cable routing channel in the stand of your display. Tip: the cable straps at the inside of the connector compartment allow you to fix the cables for...

  • Page 15

    3. Display installation w arning : use an arm that is approved by vesa (according to the vesa 100 mm stan- dard). Use an arm that can support the weight of the display. Refer to the technical specifica- tions of this display for the applicable weight. Overview the panel, standard attached to the til...

  • Page 16: 3.7

    3. Display installation 5. Remove the four screws fixing the foot while supporting the foot. 6. Attach the arm stand firmly to the panel using 4 screws m4 x 8 mm. 3.7 first time starting up overview you are now ready to start up your nio 2mp led display for the first time. 1. Switch on your nio 2mp ...

  • Page 17: 4. Daily Operation

    4. Daily operation 4. Daily operation 4.1 recommendations for daily operation optimize the lifetime of your display enabling the display power management system (dpms) of your display will optimize its diagnostic life- time by automatically switching off the backlight when the display is not used fo...

  • Page 18: 4.2

    4. Daily operation maximize quality assurance the ’medical qaweb’ system offers online service for high-grade quality assurance, providing maximum diagnostic confidence and uptime. Barco recommends to install medical qaweb agent and apply the default qaweb policy at least. This policy includes calib...

  • Page 19: 4.4

    4. Daily operation 4.4 bringing up the osd menus how to bring up the osd menus the osd menu allows you to configure different settings to make your nio 2mp led display fit your needs within your working environment. Also, you can retrieve general information about your display and its current config...

  • Page 20

    4. Daily operation cancel standby (iec 60417–5009) 18 k5903058 nio 2mp led display 04/03/2014.

  • Page 21: 5. Advanced Operation

    5. Advanced operation 5. Advanced operation 5.1 osd menu language about the osd menu language by default, the osd menu comes up in english. However, there’s a wide range of other languages avail- able for the osd menu of your nio 2mp led display. To change the language of the osd menu: 1. Bring up t...

  • Page 22: 5.4

    5. Advanced operation 5.4 key indicator lights about the key indicator lights by default, after lighting up, the key indicator lights will dim again if no further actions are taken within the following 5 seconds. However, this behavior can be changed so that the key indicator lights are always on or...

  • Page 23: 5.7

    5. Advanced operation 5.7 dpms mode about dpms mode enabling the display power management system (dpms) mode on your display will optimize its diagnos- tic lifetime by automatically switching off the backlight when the display is not used for a specified period of time. By default, dpms mode is enab...

  • Page 24: 5.9

    5. Advanced operation 5.9 luminance target about the luminance target the luminance target of your nio 2mp led display is adjustable over a predefined range. When you change the luminance target, the display will adjust its backlight to reach the target. To set the luminance target: 1. Bring up the ...

  • Page 25: 5.12 Reading Rooms

    5. Advanced operation grayscale/color parts contain more diagnostic information then others. To respond to these conclusions, display functions have been defined. These functions emphasize on these parts containing crucial diag- nostic information by correcting the native panel behavior. Native if y...

  • Page 26: 5.13 Display Orientation

    5. Advanced operation ct/mr/nm corresponds to light conditions in diagnostic reading rooms for computed tomography, magnetic resonance or nuclear medicine scans. Staff office corresponds to light conditions in office rooms. Clinical viewing room corresponds to light conditions in diagnostic reading ...

  • Page 27: 5.15 Edid Timings

    5. Advanced operation 4. Select one of the available input signals and confirm. 5.15 edid timings about edid timings following edid timings are available for your nio 2mp led display: refresh rate allows to manually select the refresh rate of the image source video input signal depending on the maxi...

  • Page 28

    5. Advanced operation 3. Enter the display, image sources, calibration or connectivity submenu as desired. 26 k5903058 nio 2mp led display 04/03/2014.

  • Page 29: 6. Maintenance

    6. Maintenance 6. Maintenance general maintenance information the nio 2mp led display does not require any scheduled maintenance or calibration activities. We recommend to use qaweb with the barco default tests and frequencies to calibrate and maintain the display or return the display to a barco ap...

  • Page 30

    6. Maintenance 28 k5903058 nio 2mp led display 04/03/2014.

  • Page 31: 7. Important Information

    7. Important information 7. Important information 7.1 safety information general recommendations read the safety and operating instructions before operating the device. Retain safety and operating instructions for future reference. Adhere to all warnings on the device and in the operating instructio...

  • Page 32

    7. Important information power cords: • use a power cord that matches the voltage of the power outlet, which has been approved and complies with the safety standard of your particular country. • do not overload wall outlets and extension cords as this may result in fire or electric shock. • mains le...

  • Page 33: 7.2

    7. Important information 7.2 environmental information disposal information waste electrical and electronic equipment this symbol on the product indicates that, under the european directive 2012/19/eu governing waste from electrical and electronic equipment, this product must not be disposed of with...

  • Page 34

    7. Important information 零件 项目(名称) component name 有毒有害物 质或元素 hazardous substances and elements 铅 pb 汞 hg 镉 cd 六价 铬 cr6+ 多 溴联苯 pbb 多 溴二苯 醚 pbde 塑胶外壳 plastic enclosure o o o o o o 散 热片(器) heatsinks o o o o o o 电源供应器 power supply unit x o o o o o 风扇 fan o o o o o o 文件 说明书 paper manuals o o o o o o 光 盘说...

  • Page 35: 7.3

    7. Important information 7.3 regulatory compliance information indications for use the nio 2mp led display (mdnc-2221) is intended to be used in displaying and viewing digital images for review by trained medical practitioners. These devices must not be used in primary image diagnosis in mammography...

  • Page 36

    7. Important information emissions test compliance electromagnetic environment – guidance rf emissions cispr 11 class b harmonic emissions iec 61000-3-2 class d voltage fluctuations/ flicker emissions iec 61000-3-3 complies the nio 2mp led display is suitable for use in all establishments, including...

  • Page 37

    7. Important information immunity test iec 60601 test levels compliance level electromagnetic environment – guidance voltage dips, short interruptions and voltage variations on power supply input lines iec 61000-4-11 t 1 (> 95% dip in u t ) for 0.5 cycle 40% u t (60% dip in u t ) for 5 cycles 70% u ...

  • Page 38

    7. Important information immunity test iec 60601 test levels compliance level electromagnetic environment – guidance survey, 3 should be less than the compliance level in each frequency range. 4 interference may occur in the vicinity of equipment marked with symbol: at 80 mhz and 800 mhz, the higher...

  • Page 39: 7.5

    7. Important information these guidelines may not apply in all situations. Electromagnetic propagation is af- fected by absorption and reflection form structures, object and people. 7.5 explanation of symbols symbols on the device on the device or power supply, you may find the following symbols (no...

  • Page 40

    7. Important information indicates the manufacturing date indicates the temperature limitations 6 for the device to safely operate within specs indicates the device serial no. Warning: dangerous voltage caution consult the operating instructions indicates this device must not be thrown in the trash ...

  • Page 41: 7.6

    7. Important information 20 - 30 kg indicates that the box should be carried with two persons. Indicates that the box should not be cut with a knife, a cutter or any other sharp object. -20 °c +60 °c xx yy indicates the temperature limits to which the medical device can be safely exposed when being ...

  • Page 42: 7.7

    7. Important information 7.7 technical specifications overview product acronym mdnc-2221 screen technology ips-pro active screen size (diagonal) 540 mm (21.3”) active screen size (h x v) 324,9 mm x 433,2 mm (12.79” x 17.1”) aspect ratio (h:v) 4:3 resolution 2mp (1600 x 1200) pixel pitch 0.27 color i...

  • Page 43: 7.8

    7. Important information net weight w/o stand 7.6 kg (with glass) – 6.32 kg (without glass) net weight packaged with stand 16.8 kg (with glass) – 15.52 kg (without glass) net weight packaged w/o stand n/a height adjustment range 100 mm tilt -5° / +25° swivel -30° / +30° pivot n/a mounting standard v...

  • Page 44: 7.9

    7. Important information 7.9 open source license information open source license information open source license usage this product contains software components released under an open source license. A copy of the source code is available on request by contacting your barco customer support represen...