Summary of MDRC Series
Page 1
Mdrc series user manual.
Page 2
2 copyright notice this document is copyrighted. All rights are reserved. Nor this document, nor any part of it, may be reproduced or copied in any form or by any means - graphical, electronic, or mechanical including photocopying, taping or information storage and retrieval systems - without writte...
Page 3
3.
Page 4: Table of Contents
4 table of contents table of contents ....................................................................................... 4 preface........................................................................................................ 6 important notice.............................................
Page 5
5 technical specifications mdrc-2120 .................................................. 42 compatibility modes mdrc-2120 ....................................................... 44 regulatory compliance ....................................................................... 45.
Page 6: Preface
6 preface important notice notice although every attempt has been made to achieve technical accuracy in this document, we assume no responsibility for errors that may be found. Our goal is to provide you with the most accurate and usable documentation possible; if you discover errors, please let us ...
Page 7: Environmental Information
7 environmental information disposal information the lamps inside the display contain mercury. Do not throw the display in the trash. Dispose of it as required by local ordinances or regulations. This equipment has required the extraction and use of natural resources for its production. It may conta...
Page 8: Safety Instructions
8 safety instructions general recommendations • read the safety and operating instructions before operating the display. • retain safety and operating instructions for future reference. • adhere to all warnings on the display and in the operating instructions manual. • follow all instructions for op...
Page 9
9 mode of operation: continuous. Intended use this display is an amlcd display designed for viewing medical x-ray images. This unit should not be used near patients and should be kept outside of 1.83 m perimeter and 2.29 m vertical. Power connection power requirements: the display must be powered us...
Page 10
10 combinations – systems – shall comply with the standard iec 60601-1-1, safety requirements for medical electrical systems. Equipment not complying with ul/en / iec 60601-1 shall be kept outside the patient environment, as defined in the standard. Equipment not complying with iec 60601 must be kep...
Page 11
11 recommendations for using your display system 1. Optimize the lifetime of your display enabling the display power management system (dpms) of your display (in the display’s settings menu) will optimize its diagnostic lifetime by automatically switching off the backlight when the display is not us...
Page 12: Unpacking and Handling Tips
12 performance of the product. To ensure optimal product quality, barco applies strict selection criteria for its lcd panels. To learn more about lcd technology and missing pixels, consult the dedicated white paper available at www.Barcomedical.Com. 4. Enhance user comfort every barco multi-head dis...
Page 13: Preventing Fire And Injury
13 cosmetics and oils on the skin are both detrimental to the screen and difficult to remove. • allow the display to warm up to room temperature before turning it on. Avoid sudden temperature changes in the environment, as this may cause condensation, which damages the display. • do not set up the d...
Page 14: Cleaning The Display
14 cleaning the display observe the following guidelines to maintain display and lcd screen. • use a clean, lint-free, absorbent cotton cloth to clear off any residual glue from removal of the protective film or to remove surface dust. Apply light pressure to remove the dust. • dampen a clean cloth ...
Page 15: Explanation of Symbols
15 3 use the stand lock to anchor the panel. Explanation of symbols disposal. Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. Eu countries require the use of separate recycling collection services. Caution. Read the accompanying text c...
Page 16: Introduction
16 introduction about the product thank you for choosing barco. The mdrc series are lcd displays with an active matrix, thin-film transistor (tft) liquid crystal display (lcd). These products also demonstrate the following outstanding features: mdrc-1119 • dual analog and digital signal. • 19” diago...
Page 17
17 mdrc-2120 • dual analog and digital signal. • 20.1” diagonal screen. • 1600x1200 high resolution. • wide viewing angle technology. • 31.5 ~ 93.75 khz horizontal scan. • 59 ~ 61 hz refresh rate. • auto adjustment and re-scaling function. • high quality full screen re-scaling capability. • multilin...
Page 18: Package Overview
18 package overview usa power cord eur power cord china power cord power adapter vga signal cable dvi-d cable user’s manual.
Page 19: Installation
19 installation product overview front view.
Page 20: Back View
20 back view mdrc-1119 mdrc-2120 dc power-in usb ports dvi-d input vga input dc power-in usb ports dvi-d input vga input.
Page 21: Tilt
21 tilt grasp the lcd display with both hands and adjust the tilt as desired. Kensington security slot the monitor can be secured to your desk or any other fixed object with kensington lock security products. Kensington lock is not included. Kensington security slot.
Page 22: Start Your Installation
22 start your installation connecting the display use only the power adapter, power cord, and the video cable shipped with this display. For mdrc-1119 :the universal external 12v dc/ 5.0a power adapter (100-240v~, 1.5a, 50-60hz for power adapter rating) is the ault (jmw160kb1200f04). For mdrc-2120, ...
Page 23
23.
Page 24
24 adjusting the screen position vertical height portrait/landscape left to right pan front to back tilt remove monitor stand may forcefully extend and cause injury lift monitor to "full up" position in advance picking up the base or removing the monitor.
Page 25: User Controls
25 user controls jog dial controls n o.
Page 26: How To Use The Osd Menus
26 no./ icon control function n jog dial button - power switch - menu 1. Press the jog dial button for 1 sec to power off to the lcd display. 2. Swivel jog dial button for osd menu o led power led 1. Green indicates the display is turned on. 2. Orange indicates the display is in stand-by mode. How t...
Page 27: On-Screen Display Menus
27 on-screen display menus input selection menu function description vga analog input selection dvi digital input selection exit exit menu.
Page 28
28 adjustments menu function description brightness to adjust the overall image and background brightness level. Contrast* to adjust the image brightness in relation to the background (only applicable if vga is selected) sharpness* manual adjustment of the image sharpness (only applicable if vga is ...
Page 29
29 dynamic gamma 1.8 dynamic gamma 1.8 selection dynamic gamma 2.2 dynamic gamma 2.2 selection dicom dicom selection user user definable table via qaweb agent exit exit menu.
Page 30
30 color menu function description native set the image color temperature to the lcd panel’s native, uncorrected color temperature clearbase set the image color temperature to clearbase bluebase set the image color temperature to bluebase user user definable color temperature. Can be changed manuall...
Page 31
31 geometry menu function description auto set* automatically adjusts the image parameters to obtain a correctly aligned image clock* manually adjust the internal clock frequency. Increasing this value makes the image wider. Decreasing this value makes the image smaller. Phase* manually adjusts the ...
Page 32
32 setting menu function description osd setting osd settings menu factory init select this function to reset all display parameters to the factory settings language select the osd language dpms dpms menu exit exit menu.
Page 33
33 osd settings menu function description osd time out set time when osd will disappear osd horizontal osd horizontal alignment osd vertical osd vertical alignment osd direction rotate osd to landscape or portrait exit exit menu.
Page 34
34 information menu function description display name mdrc- 1119 or mdrc-2120 firmware version firmware version display run time display run time backlight run time backlight run time notes：symbol (*) means only analog signal is used..
Page 35: Appendix
35 appendix troubleshooting if you are experiencing trouble with the lcd display, refer to the following troubleshooting. If the problem persists, please contact your local dealer or our service center. Problem: no image appears on screen. • check that all the i/o and power connectors are correctly ...
Page 36: Warning Signal
36 problem: image is unstable and flickering • use “phase” to make an adjustment. Problem: image is scrolling • check and make sure the vga signal cable (or adapter) is well connected. • check and reconfigure the display mode of the vertical refresh rate of your graphics card to make it compatible w...
Page 37: Product Dimensions Mdrc-1119
37 product dimensions mdrc-1119.
Page 38
38 technical specifications mdrc-1119 lcd panel mdrc-1119 technology tft color lcd (va) native resolution 1280 x1024 active screen diagonal 19" (483 mm) active screen area 376 x 301 mm pixel pitch 0.294 x 0.294 visual characteristic maximum luminance 300 cd/m2 dicom calibrated luminance 180 cd/m2 im...
Page 39
39 osd languages english, french, german, spanish, italian, dutch, simplified chinese, traditional chinese, korean. Options protective cover yes touch screen yes landscape/portrait yes approvals emc en 60601-1-2; fcc-b; ices-001, vcci, keti, ccc, bsmi safety ce en60601-1; ul 60601-1, c-ul, ccc, keti...
Page 40
40 compatibility modes mdrc -1119 standard resolution vertical refresh (hz) horizontal scan (khz) ibm vga ibm vga ibm vga 640x350 640x480 720x400 70 60 70 31.5 31.5 31.5 vesa vga vesa vga vesa svga vesa svga vesa svga vesa svga 640x480 640x480 800x600 800x600 800x600 800x600 72 75 56 60 72 75 37.9 3...
Page 41: Product Dimensions Mdrc-2120
41 product dimensions mdrc-2120
Page 42
42 technical specifications mdrc-2120 lcd panel mdrc-2120 technology tft color lcd (ips) native resolution 1600 x1200 active screen diagonal 20.1" (510.54 mm) active screen area 432 x 331.5 mm pixel pitch 0.255 x 0.255 visual characteristic maximum luminance 300 cd/m2 dicom calibrated luminance 180 ...
Page 43
43 osd languages english, french, german, spanish, italian, dutch, simplified chinese, traditional chinese, korean. Options protective cover yes touch screen no landscape/portrait yes approvals emc en 60601-1-2; fcc-b; ices-001, vcci, keti, ccc, bsmi safety ce en60601-1; ul 60601-1, c-ul, ccc, keti,...
Page 44
44 compatibility modes mdrc-2120 standard resolution vertical re- fresh (hz) horizontal scan (khz) vga 640x480 60 31.50 svga 800x600 60 37.68 xga 1024x768 60 48.36 1152*870 60 54.36 sxga 1280*1024 60 63.96 1280*1024 60 62.50 1mp2fh 1024*1280 59 77.78 uxga 1600*1200 60 75.00 1600*1200 59 72.81 2mp2fh...
Page 45: Regulatory Compliance
45 regulatory compliance canada, european union, united states this display has been tested and found to comply with iec/ul/en 60601-1 and iec 60601-1-2 standards, and is certified to meet medical standard ul 60601-1 and can/csa c22.2 no 601.1(c us mark) which are related to electrical shock, fire a...
Page 46
46 the display was classified as required by the mdd according to annex ix of the directive and the medical device (meddev) guidance available at the time of classification. Because the display uses electrical energy and has no direct patient connections and—by itself—no medical utility, the display...
Page 47
47 eu emc directive 89/336/eec eu electromagnetic compatibility directive en 60601-1-2 (2001) collateral standard electromagnetic medical electrical equipment compatibility requirements en 55011 (class b) limits and methods of measurements for radio interference characteristics of industrial, scient...
Page 48
48 iec 61000-4-6 conducted immunity iec 61000-4-8 magnetic field immunity conformance to the medical device directive 93/42/eec en 60601-1 medical part 1 general requirements for safety electrical equipment. U.S. Fcc compliance statement this device complies with part 15 of the fcc rules. Operation ...
Page 49
49 • connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • consult the dealer or an experienced radio/tv technical for help. Caution: changes or modifications to this equipment not expressly approved by the party responsible for compliance could ...
Page 50: And Conditions
50 barco mid general warranty terms and conditions applicable from jan 1st 2008 article 1: product warranty barco nv, medical imaging division warrants that the equipment will be free of defects in workmanship or material for the warranty period or the specific period of a warranty extension program...
Page 51
51 1.3 the customer shall return, freight prepaid, the defective equipment or subassemblies in its original packaging with the assigned rma number for repair to the barco nv, mid customer support centre (or an authorised service centre). 1.4 replacement parts used shall be new or equivalent to new p...
Page 52
52 mal functioning of the hardware covered under this agreement. 2.4 normal wear and tear, use under circumstances exceeding specifications, such as use in dusty environment or under excessive temperature conditions, abuse, unauthorised repair or alternation, lack of proper configuration or maintena...
Page 53
53 iv. Difference in color temperature as a result of not using all displays of a multi-head configuration at the same rate. V. Lcd luminance uniformity that is in within the product specifications or luminance uniformity performance that is inherent to lcd technology. Barco nv, mid does not warrant...
Page 54
54 version of the software. (c) the repair or replacement under the warranties covers the cost of material and labor. Article 5: disclaimer of warranties barco nv, mid disclaims all warranties, expressed or implied, including all implied warranties of merchantability and fitness for a particular pur...
Page 55
55 v1.02 august 2008.