- DL manuals
- Barco
- Projector
- MGP D5
- Installation & User Manual
Barco MGP D5 Installation & User Manual
Summary of MGP D5
Page 1
Installation & user manual mgp d5 dicom theater lite.
Page 2
Copyright notice mgp d5 dicom theater lite 3 copyright notice this document is copyrighted. All rights are reserved. Nor this document, nor any part of it, may be reproduced or copied in any form or by any means - graphical, electronic, or mechanical including photocopying, taping or information sto...
Page 3
Copyright notice 4 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 4
Table of contents mgp d5 dicom theater lite 5 table of contents preface........................................................................................ 7 safety instructions............................................................................. 11 explanation of symbols ..................
Page 5
Table of contents 6 mgp d5 dicom theater lite introduction ................................................................................ 55 using the barcomed hardware tab........................................... 56 display tools ....................................................................
Page 6
Mgp d5 dicom theater lite 7 preface.
Page 7
Preface (this page intentionally left blank.) 8 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 8: Notice
Preface mgp d5 dicom theater lite 9 notice although every attempt has been made to achieve technical accuracy in this document, we assume no responsibility for errors that may be found. Our goal is to provide you with the most accurate and usable documentation possible; if you discover errors, pleas...
Page 9: Canadian Notice
Preface 10 mgp d5 dicom theater lite canadian notice this class a digital apparatus complies with canadian ices-003. Cet appareil numérique de la classe a est conforme à la norme nmb-003 du canada..
Page 10: General Recommendations
Safety instructions mgp d5 dicom theater lite 11 safety instructions general recommendations read the safety and operating instructions before operating the display. Retain safety and operating instructions for future reference. Adhere to all warnings on the display and in the operating instructions...
Page 11: Water And Moisture
Safety instructions 12 mgp d5 dicom theater lite • power cords: power cord with cee 7 plug: the colors of the mains lead are colored in accordance with the following code: green-and-yellow: earth (safety earth), blue: neutral, brown: line power cord with ansi 73.11 plug: the wires of the power cord ...
Page 12: This Apparatus Conforms To:
Safety instructions mgp d5 dicom theater lite 13 this apparatus conforms to: ce, iec 60950, ul 60950, can/csa c22.2 no. 60950 (c-ul), ccc. National scandinavian deviations for cl. 1.7.2 : finland: "laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan" norway: "apparatet må tilko...
Page 13
Explanation of symbols 14 mgp d5 dicom theater lite explanation of symbols symbols on the display and power supply on the display or power supply, you may find the following symbols: symbols used throughout the manual: indicates the display is approved according to the ce regulations or indicates th...
Page 14
Mgp d5 dicom theater lite 15 overview.
Page 15
Overview (this page intentionally left blank.) 16 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 16
Introduction mgp d5 dicom theater lite 17 introduction about the system mgp d5 dicom theater provides consistent image quality for consulting, reviewing and training applications. The system offers a turnkey solution, bundling high-bright medical grade projector, flat panel display, dedicated displa...
Page 17
Introduction 18 mgp d5 dicom theater lite done by means of the i-guard® optical sensor, incorporated in the bezel of the display. The medical pro software is used for defining the preset the display devices must be conform to and calibrate them to make them conform to the preset. The theaterwatch so...
Page 18
Quick installation overview mgp d5 dicom theater lite 19 quick installation overview mgp d5 dicom theater installation overview to install the mgp d5 dicom theater system completely, you have to follow these steps: 1. Install the barcomed display controller(s) in the pc. For more information, please...
Page 19: Proceed As Follows:
Quick installation overview 20 mgp d5 dicom theater lite a) single-head with 1 display and 1 projector figure 1 proceed as follows: 1. Connect pc output video2 to the projector vga input by means of the dvi-to-vga cable (15 m / 50 ft). 2. Connect pc output video1 to the display dvi video input by me...
Page 20: Proceed As Follows:
Quick installation overview mgp d5 dicom theater lite 21 b) single-head with two projectors figure 2 proceed as follows: 1. Connect one pc video output to the first projector’s vga input by means of a dvi-to-vga cable (15 m / 50 ft). 2. Connect the other video output to the second projector’s vga in...
Page 21: Proceed As Follows:
Quick installation overview 22 mgp d5 dicom theater lite c) dual-head with two displays and two projectors figure 3 proceed as follows: 1. Connect pc output video2 to the first projector’s vga input by means of a dvi-to-vga cable (15 m / 50 ft). Barco dvi vga video1 video2 video3 video4 barco dvi vg...
Page 22: Important:
Quick installation overview mgp d5 dicom theater lite 23 2. Connect pc output video1 to the first display’s dvi video input by means of a dvi-to-dvi cable. 3. Connect pc output video4 to the second projector’s vga input by means of a dvi-to-vga cable (15 m / 50 ft). 4. Connect pc output video3 to th...
Page 23: Proceed As Follows:
Quick installation overview 24 mgp d5 dicom theater lite e) dual-head with two displays and one projector figure 4 proceed as follows: 1. Connect pc output video2 to the first display’s dvi video input by means of a dvi-to-dvi cable. 2. Connect pc output video1 to the projector vga input by means of...
Page 24: Important:
Quick installation overview mgp d5 dicom theater lite 25 4. Connect pc output video3 to the second display’s dvi video input by means of a dvi-to-dvi cable. Important: do not connect the two display inputs nor the two projector inputs to the same display controller. In other words, to each display c...
Page 25
Quick installation overview (this page intentionally left blank.) 26 mgp d5 dicom theater lite.
Page 26
Mgp d5 dicom theater lite 27 display controller installation.
Page 27
Display controller installation (this page intentionally left blank.) 28 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 28
Barcomed 2mp2cp overview mgp d5 dicom theater lite 29 barcomed 2mp2cp overview the barcomed 2mp2cp display controller delivers a quality image with 24-bit true color for medical viewing applications. Minimum system requirements • pentium 4 or compatible processor • 256mb of system memory (minimum) f...
Page 29
Barcomed 2mp2cp overview 30 mgp d5 dicom theater lite • displays vga boot messages on mgp d5 dicom theater displays. Supported resolutions the following resolution is available on both heads prior to installing the driver or when the operating system is booted in vga mode. • 640x480 @ default refres...
Page 30
Display controller installation mgp d5 dicom theater lite 31 display controller installation caution: wear a grounded, protective esd strap during installation or handling of the display controller. Electrostatic charges can damage the display controller. Prior to installing your barcomed 2mp2cp dis...
Page 31
Display controller installation 32 mgp d5 dicom theater lite figure 6 below). By default, vga should be enabled, switch 1 on and switch 2 off. If you decide to use a separate vga monitor as your boot monitor, you must disable the barcomed 2mp2cp’s on- board vga capabilities by changing the switch se...
Page 32
Display controller installation mgp d5 dicom theater lite 33 figure 7: pci and raid controller slots installing the barcomed 2mp2cp display controller install the barcomed 2mp2cp controller in your computer following these steps: 1. Turn off the power to your computer and disconnect the power cord, ...
Page 33
Display controller installation 34 mgp d5 dicom theater lite 6. Connect the primary display to the connector marked “vid 1” on the barcomed 2mp2cp display controller using the provided dvi cable (see figure 8). For a dual-headed barcomed 2mp2cp setup, connect the secondary display to the other conne...
Page 34
Mgp d5 dicom theater lite 35 display controller software installation.
Page 35
Display controller software installation (this page intentionally left blank.) 36 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 36: 2000 And
Windows 2000 barcomed 2mp2cp software installation mgp d5 dicom theater lite 37 windows 2000 barcomed 2mp2cp software installation note: these instructions apply to both windows ® 2000 and windows ® xp. Preparation prior to installing your mgp d5 dicom theater software the following should be done. ...
Page 37
Windows 2000 barcomed 2mp2cp software installation 38 mgp d5 dicom theater lite windows stops launching the “found new hardware wizard”. Please be patient as this may take several minutes while windows scans its library of plug-and-play device drivers to see if it has a driver for your barcomed 2mp2...
Page 38
Windows 2000 barcomed 2mp2cp software installation mgp d5 dicom theater lite 39 figure 9 if it determines that the microsoft installer is either out of date or missing, it will display the screen shown in figure 10 below. Click “ok” to continue, the wizard will then install a newer version of the mi...
Page 39
Windows 2000 barcomed 2mp2cp software installation 40 mgp d5 dicom theater lite hardware wizard - video controller”. Again, please be patient as windows will again scan its library of plug-and- play device drivers to see if it has a driver for your barcomed 2mp2cp controller. The barcomed software i...
Page 40: “Cancel”.
Windows 2000 barcomed 2mp2cp software installation mgp d5 dicom theater lite 41 your barcomed software cd. Select the device you want to install and then click “next”. Note: if there are no barcomed devices installed, or if windows does not recognize the installed devices, or if the driver on your b...
Page 41: “Cancel”.
Windows 2000 barcomed 2mp2cp software installation 42 mgp d5 dicom theater lite figure 13 click “ok” to install the new driver. If you don’t want to replace the exiting driver, click “ok” and then click “cancel”. 7. The “device confirmation” screen displays the device driver that will be installed. ...
Page 42
Windows 2000 barcomed 2mp2cp software installation mgp d5 dicom theater lite 43 figure 15: windows xp windows logo testing warning 9. When the screen shown in figure 16 below appears decide if you want the driver to install with cloned heads mode enabled or disabled, then click “next”. Figure 16 whe...
Page 43: Software” Below.
Windows 2000 barcomed 2mp2cp software installation 44 mgp d5 dicom theater lite the barcomed product install wizard or click “back” to return to the welcome screen of the barcomed product install wizard to select additional software to install. When you click “finish” windows may prompt you to resta...
Page 44
Windows 2000 barcomed 2mp2cp software installation mgp d5 dicom theater lite 45 displays the screens shown in figure 17 and figure 18, click “yes” or “continue anyway” to continue. Figure 17: windows 2000 digital signature not found warning figure 18: windows xp windows logo testing warning the barc...
Page 45
Windows 2000 barcomed 2mp2cp software installation 46 mgp d5 dicom theater lite d5 or your displays active. To make your mgp d5 or your displays active you must extend your desktop to these displays using the “windows display control panel”. If for some reason windows failed to correctly set the res...
Page 46
Mgp d5 dicom theater lite 47 display controller tools.
Page 47
Display controller tools (this page intentionally left blank.) 48 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 48
Barco display tab mgp d5 dicom theater lite 49 barco display tab introduction the barco display tab is used for gathering information about the barcomed flat panel display(s). To access the barco display tab do the following: 1. Open the “display properties control panel” by right clicking on the de...
Page 49
Barco display tab 50 mgp d5 dicom theater lite using the barco display tab displays all of the available display controllers that are of the same type as the current barco display controller are shown here graphically, with one display icon representing each output of a display controller. The icon ...
Page 50
Barco display tab mgp d5 dicom theater lite 51 firmware revisions: this is the runtime firmware that is loaded in the display. This information may be helpful when there is a problem. Internal temperature: this is the temperature inside the display. It starts out at about the ambient temperature whe...
Page 51
Barcomed driver tab 52 mgp d5 dicom theater lite barcomed driver tab introduction after the barcomed windows display controller driver is installed, a new display properties tab is available for configuring special features of the barcomed display controller. Languages supported the barcomed driver ...
Page 52
Barcomed driver tab mgp d5 dicom theater lite 53 figure 21: barcomed driver tab under windows 2000 and windows xp status the status section displays information about the current barcomed display controller, driver, and the currently selected display resolution. Graphics board this displays the curr...
Page 53
Barcomed driver tab 54 mgp d5 dicom theater lite resolution this displays the currently selected display resolution. Monitor configuration if the options in this section are grayed out, then they are not available for the model controller with which you are working. For the barcomed 2mp2cp, the moni...
Page 54
Barcomed hardware tab mgp d5 dicom theater lite 55 barcomed hardware tab introduction the barcomed hardware tab is used for gathering information about barcomed display controller(s). For all barcomed display controller(s) it will display pci information. For barcomed display controller(s) based on ...
Page 55
Barcomed hardware tab 56 mgp d5 dicom theater lite using the barcomed hardware tab to access the barcomed hardware tab do the following: 1. Open the “display properties control panel” by right clicking on the desktop, then select “properties”. 2. Click on the “settings” tab. Double click on the rect...
Page 56
Barcomed hardware tab mgp d5 dicom theater lite 57 figure 22 barcomed hardware tab under windows 2000 or windows xp device displays the current barcomed display controller, driver, and the currently selected display resolution. Information device id: displays the device’s pci device id number. Vendo...
Page 57
Barcomed hardware tab 58 mgp d5 dicom theater lite subsystem id: displays the device’s pci subsystem id number. Subsystemvendorid: displays the device’s pci subsystem vendor id number. Vga status: displays whether the vga capabilities of the barcomed controller are enabled or disabled. Firmware info...
Page 58
Barcomed hardware tab mgp d5 dicom theater lite 59 detailed customer contact information. After completion of the customer contact information screen, the wizard will then ask the user to provide a description of the problem, and prompt the user to enter the medical viewing applications that they ar...
Page 59
Barcomed hardware tab 60 mgp d5 dicom theater lite this screen gathers the diagnostic data from the user’s system as described above in this document. Click the “start diagnostic” button to begin the diagnostic gathering process. To perform the graphics operations test, check the graphics operations...
Page 60: Click On The Email Link.
Barcomed hardware tab mgp d5 dicom theater lite 61 3. Then click on “support” in the drop down menu. 4. Find the appropriate imagecare center for your country and click on the email link. 5. Enter a subject and a brief message describing the problem about which you are requesting help. 6. Attach the...
Page 61
Barcomed hardware tab 62 mgp d5 dicom theater lite.
Page 62
Mgp d5 dicom theater lite 63 display tools.
Page 63
Display tools (this page intentionally left blank.) 64 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 64
Barco dpms screen saver mgp d5 dicom theater lite 65 barco dpms screen saver introduction the barco dpms (display power management signaling) screen saver allows the user to set power and display saving features for medical displays controlled by barcomed display controllers. At the end of the work ...
Page 65
Barco dpms screen saver 66 mgp d5 dicom theater lite save as saves your current barco dpms screen saver settings. The name you specify will appear in the scheme list so you can easily restore these settings later. Delete deletes the scheme that is selected in the scheme box. Work schedule in this pa...
Page 66
Barco dpms screen saver mgp d5 dicom theater lite 67 dpms settings after work day if you have an display controller that supports dpms calls, then you will be able to set the dpms settings for after the work day. Otherwise, a text box will be displayed telling you why dpms functions are not availabl...
Page 67
Barco dpms screen saver 68 mgp d5 dicom theater lite on barco c oronis displays, the i-guard will stabilize the image within a few seconds after the display returns to the active state so there is no need for a warm-up time period. Use as logon screen saver check the box to use the barco dpms screen...
Page 68
Barco dpms screen saver mgp d5 dicom theater lite 69 including those who do not have administrator privileges, can create, modify or delete private schemes. When the delete button is pressed, the user is asked to confirm the delete request. Using the barco dpms screen saver using the barco dpms scre...
Page 69
Barco dpms screen saver 70 mgp d5 dicom theater lite figure 23: windows 2000 screen saver tab figure 24: windows xp screen saver tab 2. Click on the “settings” button. The “barco dpms screen saver control panel” will open (see figure 25 on page 71)..
Page 70
Barco dpms screen saver mgp d5 dicom theater lite 71 figure 25: barco dpms settings control panel 3. Use the default schemes by selecting one of the three default schemes. Click “ok”. Then click “ok” again. Note: if you make any changes to any of the settings of one of the three default schemes, the...
Page 71: “Screen Saver” Tab.
Barco dpms screen saver 72 mgp d5 dicom theater lite figure 26 to create a new scheme by modifying one of the three default schemes please do the following. 1. Open the “display properties control panel” by right clicking on an empty space of the desktop and selecting “properties” from the drop down...
Page 72
Barco dpms screen saver mgp d5 dicom theater lite 73 amount of time it takes your display to warm up via the “monitor setting” section. Contact your display vendor for this warm-up time. On barco c oronis displays, the i-guard will stabilize the image within a few seconds after the display returns t...
Page 73
Barco dpms screen saver 74 mgp d5 dicom theater lite 2. Click “next” on the welcome screen of the barco dpms installshield ® wizard to begin the installation. 3. Select the radio button next to “remove” on the program maintenance screen of the wizard and click “next”. 4. Click “remove” on the remove...
Page 74
Mgp d5 dicom theater lite 75 medical pro software.
Page 75
Medical pro software (this page intentionally left blank.) 76 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 76
Medical pro installation mgp d5 dicom theater lite 77 medical pro installation medical pro is used to calibrate and perform qa tasks on the displays in the system. It is not compatible with the mgp d5 projector. To calibrate the projector, use the theaterwatch software. See to use theaterwatch on pa...
Page 77
Using medical pro 78 mgp d5 dicom theater lite using medical pro after installation of the hardware and software, you must start medical pro to calibrate the display(s). Proceed as follows: 1. Start medical pro. If appropriate, you can connect to medical administrator. 2. During startup, medical pro...
Page 78
Mgp d5 dicom theater lite 79 theaterwatch software.
Page 79
Theaterwatch software (this page intentionally left blank.) 80 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 80: Theaterwatch Installation
Theaterwatch installation mgp d5 dicom theater lite 81 theaterwatch installation theaterwatch installation 1. Insert your theaterwatch cd into your computer’s cd drive. If the theaterwatch installation start screen doesn’t appear within one minute, browse the contents of your theaterwatch cd and dou...
Page 81
Theaterwatch installation 82 mgp d5 dicom theater lite 1. Open the command prompt (dos window) in windows. 2. Using dos commands, navigate to the folder containing the theaterwatch setup.Exe file on the cd-rom. 3. Type: “setup.Exe_/s_/v/qn” (where “_” represents a space).
Page 82: Compatible Displays
Using theaterwatch mgp d5 dicom theater lite 83 using theaterwatch introduction compatible displays theaterwatch is compatible with the following barco projectors and displays: mgp d5, mfcd 1218, mfgd 1218, e-2320, e-3420, e-5420, e-2620, e-3620, e-5620. To use theaterwatch the theaterwatch applicat...
Page 83
Using theaterwatch 84 mgp d5 dicom theater lite figure 28: theaterwatch systray icon note: after installation, a shortcut “theaterwatch client” is installed in the theaterwatch installation directory. You can copy this shortcut to another loca- tion (e.G., desktop) if desired. After double-clicking ...
Page 84
Using theaterwatch mgp d5 dicom theater lite 85 display settings general figure 30: display settings dialog (display tab) the numbered icons in the upper part of the dialog represent the display controller heads supported by theaterwatch. The display controller heads are also listed in the display d...
Page 85
Using theaterwatch 86 mgp d5 dicom theater lite corresponding display controller head from the display drop- down box. Tip: if you click on a numbered icon, the corresponding number appears for a few seconds on the display or projector screen connected to that display controller head. In that way yo...
Page 86: Important
Using theaterwatch mgp d5 dicom theater lite 87 • to adjust display luminance manually, adjust the luminance slider. This function is not available for mfcd/mfgd 1218 displays and mgp d5 projectors. The luminance setting is saved when the system is shut down. If the slider is positioned above the ca...
Page 87
Using theaterwatch 88 mgp d5 dicom theater lite graphic board tab figure 31: graphic board tab here you can see information about the installed display controller: name, serial number, driver version and firmware version..
Page 88
Using theaterwatch mgp d5 dicom theater lite 89 calibration tab figure 32: calibration tab for projectors.
Page 89: To Calibrate A Projector:
Using theaterwatch 90 mgp d5 dicom theater lite figure 33: calibration tab for displays here you can calibrate display(s) and projector(s), revert to the latest calibration, revert to default factory settings and view the result of the latest calibration. The possible options are explained below. To...
Page 90
Using theaterwatch mgp d5 dicom theater lite 91 3. A wizard starts, guiding you through the calibration procedure. Follow the guidelines in the wizard. The projector calibration procedure is a combination of actions in theaterwatch and projector osd (on-screen display) manipulations. To calibrate a ...
Page 91: Note:
Using theaterwatch 92 mgp d5 dicom theater lite 5. Select “using the barco lcd sensor” and click ok. This option is grayed in case theaterwatch does not find a connected barco lcd sensor. 6. Follow the guidelines on the screen to complete the calibration successfully. Note: if the equalization optio...
Page 92: The Ok Button.
Using theaterwatch mgp d5 dicom theater lite 93 to calibrate a display manually: 1. Follow step 2 and 3 of the calibration with barco lcd sensor (see page 91). 2. In the calibration dialog, check the option visually and click the ok button. The dicom optimizer dialog appears. Figure 36: dicom optimi...
Page 93: 3. Click The Ok Button.
Using theaterwatch 94 mgp d5 dicom theater lite 3. Click the ok button. The calibration and the luminance will be reset to the latest calibrated position. Note: when you start up the system, the calibration is also reset to the latest calibrated position. The luminance, however, is kept at the lates...
Page 94: Test Patterns
Using theaterwatch mgp d5 dicom theater lite 95 test patterns test patterns figure 37: test patterns dialog 1. Select the desired test pattern by clicking on the corresponding thumbnail or selecting a pattern by name from the test pattern drop-down box. 2. Click show to display the pattern. If you h...
Page 95
Using theaterwatch 96 mgp d5 dicom theater lite application settings calibration tab figure 38: calibration tab here you can check the equalization option, allowing you to match the displays from a multi-head system to the luminance of the first calibrated display of the system. Suppose you work wit...
Page 96: To Equalize The Displays:
Using theaterwatch mgp d5 dicom theater lite 97 figure 39: dual-head equalization the equalization option will be available only if: • the system contains at least one display of the same type as the one being calibrated • at least one of the displays of the same type has already been calibrated bef...
Page 97
Using theaterwatch 98 mgp d5 dicom theater lite displays tab figure 40: displays tab in this dialog you get a list of barco display and projector types compatible with theaterwatch. If you wish certain displays from your system not to be controlled by theaterwatch (e.G., because you wish to control ...
Page 98
Using theaterwatch mgp d5 dicom theater lite 99 medical administrator tab figure 41: medical administrator tab here you can connect to medical administrator, if present. To connect to medical administrator, click the medical administrator button. As a result, the medical administrator connection wiz...
Page 99: To Update Theaterwatch:
Using theaterwatch 100 mgp d5 dicom theater lite to update theaterwatch: select update theaterwatch from the start > programs > barco theaterwatch menu. The application will search via the internet if theaterwatch updates are available. If so, you will get the option to install them..
Page 100
Mgp d5 dicom theater lite 101 troubleshooting.
Page 101
Troubleshooting (this page intentionally left blank.) 102 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 102: 2000 And
Troubleshooting mgp d5 dicom theater lite 103 windows 2000 display resolution tip: these instructions apply to both windows ® 2000 and windows ® xp. Setting the resolution of your mgp d5 dicom theater display in order to set the resolution of your mgp d5 dicom theater display you must be logged in u...
Page 103
Troubleshooting 104 mgp d5 dicom theater lite display should now synchronize and display the windows desktop. 7. Click “yes” when asked, “your desktop has been reconfigured. Do you want to keep these settings?” to set the resolution of the second display attached to the barcomed display controller y...
Page 104
Driver re-installation, updates or removal mgp d5 dicom theater lite 105 driver re-installation, updates or removal reinstalling or updating your barcomed 2mp2cp driver note: these instructions apply to windows 2000 and windows xp. Important for windows 2000 or windows xp users only: if you previous...
Page 105: “Finish” Again.
Driver re-installation, updates or removal 106 mgp d5 dicom theater lite 3. To update the driver, clear the checkbox next to “dpms screen saver” (figure 44) and click “install”. Figure 44 4. For windows 2000 or windows xp please turn to step 6 on page 40 in the section titled “windows 2000 barcomed ...
Page 106: 4. Click “Next”.
Driver re-installation, updates or removal mgp d5 dicom theater lite 107 uninstalling the barcomed 2mp2cp driver 1. Insert your barcomed 2mp2cp software cd into your computer’s cd drive. If the “barcomed product installation wizard” doesn’t start within one minute, browse the contents of your mgp d5...
Page 107: 6. Click “Next”.
Driver re-installation, updates or removal 108 mgp d5 dicom theater lite figure 46 6. Click “next”. 7. If you installed your driver with dualview enabled, skip to step 8. If you installed your driver with cloned heads active, click “next” to continue. Then click “finish” to complete the uninstall pr...
Page 108: And “Yes”.
Driver re-installation, updates or removal mgp d5 dicom theater lite 109 10. When your system restarts, log in again using an account with administrator priveleges. Dualview should now be disabled. 11. The “barcomed product installation wizard” should automatically restart. Finish uninstalling the d...
Page 109
Driver re-installation, updates or removal (this page intentionally left blank.) 110 mgp d5 dicom theater lite.
Page 110
Mgp d5 dicom theater lite 111 warranty statement.
Page 111
Warranty statement (this page intentionally left blank.) 112 mgp d5 dicom theater lite (this page intentionally left blank.).
Page 112: Article 1: Services
Warranty statement mgp d5 dicom theater lite 113 article 1: services barcoview warrants that the equipment will be free of defects in workmanship or material for the warranty period. Notwithstanding the provisions of clause 2, repair and replacement of defects in material and/or workmanship under th...
Page 113
Warranty statement 114 mgp d5 dicom theater lite article 2: items excluded from warranty the warranty described herein shall not include the following: 2.1 any hardware or software item procured from a source other than barcoview or their official agent or distributor and integrated by customer or a...
Page 114
Warranty statement mgp d5 dicom theater lite 115 obligations under this paragraph shall excuse barcoview's performance hereunder: 3.1 customer shall not expose barcoview personnel to any unsafe working conditions. 3.2 repairs to equipment under warranty resulting from improper maintenance or repair ...
Page 115: Article 7: Force Majeure
Warranty statement 116 mgp d5 dicom theater lite products or services covered by or furnished under this warranty condition, whether arising out of contract, negligence, strict tort, warranty or otherwise, shall not exceed the price of the item or items of goods or services upon which such liability...
Page 116: Www.Barco.Com
Www.Barco.Com b4100518 - 00 november 2004.