- DL manuals
- Barco
- Projector
- R9000893
- Installation Manual
Barco R9000893 Installation Manual
Summary of R9000893
Page 1
Graphics 1208s r9000893 r9000896 installation manual.
Page 2: Barco Projection Systems
Barco projection systems date : 220197 art. No. : r5975857 graphics 1208s r9000893 r9000896 installation manual.
Page 3
Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, january 1997. All rights reserved. Trademarks are the rights of their respective owners. Printed in belgium barco nv/projection systems noordlaan 5 b-8520 kuurne belgium printed in bel...
Page 4: Contents
I-1 5975857 barcographics 1208s 220197 contents chapter 1 safety instructions on safety ............................................................................................................................................... 1-1 on installation ...................................................
Page 5
Chapter 6 ac power connection ac power cord connection ..................................................................................................................... 6-1 preparing your power cord ....................................................................................................
Page 6: Safety Instructions
Safety instructions 1-1 5975857 barcographics 1208s 220197 warning to prevent fire or electrical shock hazard, do not expose this equipment to rain or moisture federal communication commission (fcc statement) this equipment has been tested and found to comply with the limits of a class a digital dev...
Page 7
Safety instructions 1-2 5975857 barcographics 1208s 220197 a. Mains lead (power cord) with cee 7 plug: the wires of the mains lead are colored in accordance with the following code. Green and yellow: earth (safety earth) blue: neutral brown: line (live) b. Power cord with ansi 73.11 plug: the wires ...
Page 8
Unpacking and dimensions 2-1 5975857 barcographics 1208s 220197 2 unpacking and projector dimensions unpacking contents of the shipping carton : ❒ 1 barcographics 1208s projector ❒ 1 remote control unit plus 1 battery 9v ❒ 1 power cord with outlet plug type cee7 or ansi 73.11 ❒ 1 owner's manual of t...
Page 9
Unpacking and dimensions 2-2 5975857 barcographics 1208s 220197 projector dimensions (in mm) 110 1.
Page 10: Installation Guidelines
Installation guidelines 3-1 5975857 barcographics 1208s 220197 3 installation guidelines installation guidelines careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to optimize the use of the projection system. Environme...
Page 11
Installation guidelines 3-2 5975857 barcographics 1208s 220197 where to install the projector ? To indicate a correct installation position it is necessary to know : ❒ the distance from projector to ceiling in case of ceiling mounted; or the distance from projector to floor in case of table mounted;...
Page 12: Installation Set-Up
Installation set-up 4-1 5975857 barcographics 1208s 220197 4 installation set-up warning : the projector's top cover is not supported with locking hinge. Open with care and support the cover with your hand. Access to controls opening the top cover during the projector set-up and the installation it ...
Page 13
Installation set-up 4-2 5975857 barcographics 1208s 220197 scan adaptation the scan switches must be placed in the correct position which corresponds to the desired scanning configuration. To change the scanning, it is necessary to remove the projector top cover and to open the protection plate. For...
Page 14
Installation set-up 4-3 5975857 barcographics 1208s 220197 horizontal scan switches three switches are used, one for each crt. When changing the horizontal scan, insure that all three switches are set in the same position. See positions of the switches for the corre- sponding projector configuration...
Page 15: Projector Set-Up
Projector set-up 5-1 5975857 barcographics 1208s 220197 5 projector set-up the dip switches on the controller unit allow the set- up of the projector : ❒ 8 dip switches for setting the projector address r 1 dip switch for setting the power up mode r 3 dip switches for setting the baud rate for commu...
Page 16
Projector set-up 5-2 5975857 barcographics 1208s 220197 setting the projector address the projector's address may be set to any value between 0 and 255. When the address is set, the projector can be controlled now by : ❒ rcu for addresses between 0 and 9; ❒ ibm pc (or compatible) or apple mac for ad...
Page 17
Projector set-up 5-3 5975857 barcographics 1208s 220197 1 2 3 4 5 6 7 8 on off power-up mode off on power-up mode the projector can start up in two different modes. The start up mode is determined by the position of dip switch no. 4 of another set of 8 dip switches on the controller unit (one set of...
Page 18
Projector set-up 5-4 5975857 barcographics 1208s 220197 password mode with dip switch no.5 of the second set of 8 dip switches on the controller unit, the projector adjustments can be protected with a password. When the password feature is enabled, the user has to enter a password before he can ente...
Page 19: Ac Power Connection
Ac power connection 6-1 5975857 barcographics 1208s 220197 6 ac power connection ac power (mains) cord connection use the supplied cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the back of the projector. This projector may be connected ...
Page 20
Ac power connection 6-2 5975857 barcographics 1208s 220197 ac power check check the power voltage which is determined by the art. Nr. (article number) included in the label pasted on the backside of the projector. Projectors with the art. Nr. R9000901 must be connected to a 230 vac power source. Pro...
Page 21
Ac power connection 6-3 5975857 barcographics 1208s 220197 cover plate (side view) top view marked area cabinet metal bottom plate inside projector fuses warning ! For continued protection against fire hazard : ❒ replace with the same type of fuse. ❒ refer replacement to qualified service personnel....
Page 22
Ac power connection 6-4 5975857 barcographics 1208s 220197 starting up with a full white image when the projector is set to start up with a full white image, the "projector warm up" menu will be displayed for 30 seconds. Start up with "warm up period" if no action is taken, a white image will be dis...
Page 23: Source Connections
Source connections 7-1 5975857 barcographics 1208s 220197 7 source connections signal input connection the following signals can be connected to the projector through the inputs on the back panel of the projector : r composite video r s-video r rgb analog r rgb with sync r component video r rgb with...
Page 24
Source connections 7-2 5975857 barcographics 1208s 220197 connecting a s-video (or composite video) source to port 2 separate y-luma/c-chroma signals for higher quality playback of super vhs signals can be connected to port 2. The composite video can also be connected to this port. To select the s-v...
Page 25
Source connections 7-3 5975857 barcographics 1208s 220197 procedure to remove the line termination resistors : ➊ turn off the projector and unplug the projector power cord. ➋ remove the top cover from the projector (see p.4-1). ➌ take out the rgb input auto sync tracking module from the main frame. ...
Page 26
Source connections 7-4 5975857 barcographics 1208s 220197 connecting a rgb analog source with tri- level sync to port 4/5 (option) rgb analog input terminals with tri-level sync input or with tri-level sync on green can be connected to the projector via port 4/5. The projector detects automatically ...
Page 27
Installation adjustment mode 8-1 5975857 barcographics 1208s 220197 8 installation adjustment mode access to installation adjustment mode it will be necessary to perform several mechanical adjustments while in the installation adjustment mode. Open and remove the projector's top cover in order to ga...
Page 28
Installation adjustment mode 8-2 5975857 barcographics 1208s 220197 optical lens focusing the optical focusing procedure is performed separately for each lens. The appropriate crt will be switched on as the user proceeds through the optical focusing adjustment sequence. Each lens has two focus adjus...
Page 29
Installation adjustment mode 8-3 5975857 barcographics 1208s 220197 raster centering the raster must be centered on the crt faceplate of each tube, therefore, it is necessary to look into the lenses. Caution : to avoid eye discomfort while performing these adjust- ments, reduce the contrast and grad...
Page 30
Installation adjustment mode 8-4 5975857 barcographics 1208s 220197 crt projection angle adjustment the projection angle of the red and blue crt's is dependent on the desired size of the projected image. If the centers of green, blue and red do not coincide, the crt projection angle must be adjusted...
Page 31
Installation adjustment mode 8-5 5975857 barcographics 1208s 220197 loosen bolts e, f, g and h to pivot the blue crt until the center of the blue image and the center of the green image coincide. When the angle of the blue crt is corrected, tighten the four bolts. Press enter to continue with the di...
Page 32
Installation adjustment mode 8-6 5975857 barcographics 1208s 220197 scheimpflug adjustment (diagonal image focusing) with the diagonal image focusing corrections, it is possible to obtain uniform focus for the total projected image. These corrections must be repeated for each colour. The diagonal im...
Page 33: Codes
Messages, warnings and failure codes 9-1 5975857 barcographics 1208s 220197 9 messages, warnings and failure codes source 01 fh= 15.6 khz fv= 050 hz source 01 fh= 15.6 khz fv= 050 hz announcement of the selected source. Enter password xxxx message to enter your password. Password contains 4 digits. ...
Page 34
Messages, warnings and failure codes 9-2 5975857 barcographics 1208s 220197 warning : go to stand by projector will switch to 'stand-by' when the rcvds is no longer available. Warning : invalid frequency input the entered frequency or ap- plied frequency of the source is out of the projector's range...
Page 35: Barco Ceiling Mount Support
Appendix a: barco ceiling mount support a-1 5975857 barcographics 1208s 220197 a barco ceiling mount support this appendix gives only an overview of the contents of the installation guidelines and some overview drawings. The installation guidelines for the barco ceiling mounting support can be order...
Page 36
Appendix a: barco ceiling mount support a-2 5975857 barcographics 1208s 220197 projector-position corrections ❒ water-level adjustment d ❒ projector axis adjustment c.
Page 37: G2 Adjustment
Appendix b: g2 adjustment b-1 5975857 barcographics 1208s 220197 b g2 adjustment once the on-screen menu "g2 adjustment" is displayed, proceed as follows : g2 adjustment to return use the potentiometers on the g2-adj. Module to set the screen grid voltage for red, green and blue. Adjust until the le...
Page 38: Gamma Corrections
Gamma corrections c-1 5975857 barcographics 1208s 220197 c gamma corrections when entering the gamma corrections, a warning will be displayed : "risk of incorrect adjustment of the projector. The gamma corrections are factory adjusted using an actas colour analyser ! Therefore, only quali- fied inst...
Page 39
Gamma corrections c-2 5975857 barcographics 1208s 220197 to carry out the red and blue midlights correction : ➊ push the control stick forward or backward to highlight the item r & b midlights in the menu and then press enter. If exit is pressed, the projector will return to the service menu. ➋ afte...
Page 40: 1813
Formula outside package dimensions (inches) chemical family federal stock number (fsn) gross weight (lbs) % treshold limit value (units) alloys and metallic coatings % % pigments solvents additives catalyst vehicle hazardous mixtures of other liquids, solids, or gases appearance and odor boiling poi...
Page 41
Stability unstable stable conditions to avoid incompatability (materials to avoid) hazardous decomposition products hazardous polymerization will not occur conditions to avoid may occur steps to be taken in case material is released or spilled waste disposal method respiratory protection (specific t...