1. DL manuals
  2. Barco
  3. Projector
  4. R9001190
  5. Owner's Manual

Barco R9001190 Owner's Manual

Summary of R9001190

  • Page 1

    Barco projection systems date : 110797 owner's manual r9001190 data 3200 art. No. : r5975398.

  • Page 2

    Federal communication commission (fcc statement) this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operat...

  • Page 3

    I-1 table of contents 5975398 barcodata 3200 110797 table of contents i table of contents.............................................................................................................................................................................. I-1 unpacking and dimensions ..........

  • Page 4

    I-2 table of contents 5975398 barcodata 3200 110797 lock ............................................................................................................................................................................................... 7-8 fade .............................................

  • Page 5

    1-1 unpacking & dimensions 5975398 barcodata 3200 110797 pull to open 1 2 3 4 5 3 7 9 1 unpacking & dimensions unpacking to open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and remove the foam rubber corners and place the projector on a ...

  • Page 6

    1-2 unpacking & dimensions 5975398 barcodata 3200 110797 310a.Drw battery installation in the rcu. A battery is delivered inside the plastic bag with the power cord. Before using the rcu, first install the battery. Remove the battery cover on the backside of the remote control by pushing the indicat...

  • Page 7

    2-1 installation guidelines 5975398 barcodata 3200 110797 2 6fuhhqzlgwk installation guidelines installation guidelines careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. * enviro...

  • Page 8

    2-2 installation guidelines 5975398 barcodata 3200 110797 * where to install the projector? Definitions of the abbreviation on drawings b = distance between ceiling and top of the screen or between floor and bottom of the screen. A = correction value, distance between bottom side of projector (witho...

  • Page 9

    3-1 location and functions of control 5975398 barcodata 3200 110797 3 56,1 56287 &2003257 $8',2287 &75/ remote : remote input for wired remote control. Loudspeaker : for use in small areas only. Ir-acknowledged : ir signals are recognized (green led). Ir-received : ir signals are received but not re...

  • Page 10

    3-2 location and functions of control 5975398 barcodata 3200 110797 color phase sharpn tint brightn standby enter text exit pause &2175$67 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 (17(5 3$86( - + 3+$6( )5((= 7(;7 (;,7 $'- $''5 6 % 6+$531 66 1 &2/25 %5,*+71(66 &21 5$6 087( - + %$/$1& - + 75(%/( - + 92...

  • Page 11

    3-3 location and functions of control 5975398 barcodata 3200 110797 11 12 13 14 terminology back light key : when activated, all keys will be lighted up and visible in the dark. Adj. : adjust key, to enter the adjustment mode or for quick exit in the adjustment mode. Address key (recessed key), to e...

  • Page 12

    4-1 connections 5975398 barcodata 3200 110797 56,1 56287 &2003257 $8',2287 &7 5/ 4 adj e x it stby t e x t brightness - + - + - + - + sharpness - + t in t color contrast )5((= 0 9 7 8 6 5 4 3 2 1 (17(5 3$86( - + 3+$6( +(/3 projector mode indication contrast color phase sharpn tint brightn standby en...

  • Page 13

    4-2 connections 5975398 barcodata 3200 110797 input connections. The projector has modular input facilities. The input slots can be filled up with the following modules : when the total run time of the lamp is 720 hours or more, the following message will be displayed for 1 minute. This message will...

  • Page 14

    4-3 connections 5975398 barcodata 3200 110797 s-video 9 8 2 7 9 0 0 video l r audio 9,'(269,'(2,1387 on on video input audio input for s-video s-video input select with or then to return. Select with or then to return. Tv tuner, e.G. Tvdm 40 stereo vcr audio amplifier composite video vcr s-vhs luma/...

  • Page 15

    4-4 connections 5975398 barcodata 3200 110797 r g b h / c v on 5*%$1$/2*,1387 9 8 2 7 9 1 0 21 2)) % + * 5 9 ,13 ,13 ,1387 $1$/2*,17(5)$&(0+] 56,1 56287 &2003257 $8',2287 &75/ s - v i d e o 98 27900 v i d e o l r a u d i o 9 ,' ( 2 6 9 ,' ( 2 ,1 3 8 7 o n o n r g b h / c v o n 5 * % $ 1 $ / 2 * ,1 3...

  • Page 16

    4-5 connections 5975398 barcodata 3200 110797 select with or then to return. Select with or then to return. R-y y b-y s on 9 8 2 7 9 3 0 &20321(179,'(2,1387 audio amplifier vcr s-vhs 56,1 56287 &2003257 $8',2287 &75/ s - v i d e o 98 27900 v id e o l r a u d i o 9 ,' ( 2 6 9 ,' ( 2 ,1 3 8 7 o n o n ...

  • Page 17

    4-6 connections 5975398 barcodata 3200 110797 r g b h / c v on 5*%/(9(/6 9 8 2 7 9 2 0 )ordwlqjruqrqiordwlqjlqsxw floating non-floating 6\qfvhohfwlrq 6 h s d ud wh v \ q f 6 \ q f r q - - - - - - 1 r u p d o6 \ q f 7ulohyho6\qf - - audio amplifier vcr s-vhs 56,1 56287 &2003257 $8',2287 &75/ s - v i ...

  • Page 18

    4-7 connections 5975398 barcodata 3200 110797 )ordwlqjruqrqiordwlqjlqsxw floating non-floating - 6 \ q f v h o h f wlr q 6 h s d u d w h v \ q f 6 \ q f r q j u h h q - - - - - 56,1 56287 &2003257 $8',2287 &75/ s - v i d e o 98 27900 v id e o l r a u d i o 9 ,' ( 2 6 9 ,' ( 2 ,1 3 8 7 o n o n r - y ...

  • Page 19

    4-8 connections 5975398 barcodata 3200 110797 connecting a rcvds 05 to the projector. - up to 20 inputs with the rcvds 05 and 90 inputs when rcvds's are linked via the expansion module. - serial communication with the projector. - remote control buttons on the rcvds to control the projector (source ...

  • Page 20

    5-1 controlling 5975398 barcodata 3200 110797 5 controlling ceiling screen ir sensor rcu 56,1 56287 &2003257 $8', 2 287 &75/ 56,1 56287 &2003257 $8',2287 &75/ addr adj exit stby mute text - + - + - + - + - + tint rcu front of projector ir sensor a d d r adj exit stbymute text - + - + - + - + - + 9 r...

  • Page 21

    5-2 controlling 5975398 barcodata 3200 110797 0 127 0 60 how to display a projector address? Press the address key (recessed key on the rcu) with a pencil. The projector's address will be displayed in a 'text box'. This text box disappears after a few seconds. To continue using the rcu, it is necess...

  • Page 22

    5-3 controlling 5975398 barcodata 3200 110797 volume control volume control adjusts the volume. Use the + button for a higher volume. Use the - button for a lower volume. Bass control bass control adjusts the bass level (low tones). Use the + button for more low tones. Use the - button for less low ...

  • Page 23

    6-1 start up of the adjustment mode 5975398 barcodata 3200 110797 6 start up of the adjustment mode adjustment mode all source set ups, picture tunings and geometry are made while in the 'adjustment mode'. Press the adjust or enter key to enter the 'adjustment mode'. You are now in the 'adjustment m...

  • Page 24

    7-1 random access adjustment mode 5975398 barcodata 3200 110797 random access adjustment mode starting up the random access adjustment mode push the control disk up or down to highlight 'random access' and then press enter. File service random access adjustment mode load edit rename copy options del...

  • Page 25

    7-2 random access adjustment mode 5975398 barcodata 3200 110797 select with or then to return. Select with or then to return. Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source cor...

  • Page 26

    7-3 random access adjustment mode 5975398 barcodata 3200 110797 edit file the edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data. To start up the edit menu, push the con...

  • Page 27

    7-4 random access adjustment mode 5975398 barcodata 3200 110797 select with or to toggle or to change value to return sync pulse clamp pulse clamp delay clamp width example for clamp position [trailing] edit file options source number 1 clamp position [leading] clamp width [1] field polarity inverte...

  • Page 28

    7-5 random access adjustment mode 5975398 barcodata 3200 110797 the first character is highlighted. Push the control disk to the right or to the left to select the desired character. Change that character by pushing the control disk up or down. Numeric characters can be entered directly with numeric...

  • Page 29

    7-6 random access adjustment mode 5975398 barcodata 3200 110797 select with or then to return. Delete file to delete a selected file out of the list of files. Use the control disk to select delete and press enter. The delete selection menu will be displayed. Push the control disk up or down to selec...

  • Page 30

    7-7 random access adjustment mode 5975398 barcodata 3200 110797 select with or then to return. 0 2.5 1 2.4 sync slow/fast highlight sync by pushing the control disk up or down and press enter to toggle between slow and fast. Note : sync is normally used in the slow position. The fast position is use...

  • Page 31

    7-8 random access adjustment mode 5975398 barcodata 3200 110797 audio tuning highlight audio tuning by pushing the control disk up or down and press enter to select. The audio tuning menu will be displayed. The following items are available : - volume - balance - bass - treble - mute - lock - fade v...

  • Page 32

    7-9 random access adjustment mode 5975398 barcodata 3200 110797 select with or then to return. Geometry highlight geometry by pushing the control disk up or down and press enter to select the geometry selection menu. The following adjustment are possible : - horizontal and vertical image shift. - ho...

  • Page 33

    7-10 random access adjustment mode 5975398 barcodata 3200 110797 select with or then to return. Side keystone highlight side keystone by pushing the control disk up or down and press enter to select. The side keystone adjustment is used to align the image if the projector is mounted as a non standar...

  • Page 34

    7-11 random access adjustment mode 5975398 barcodata 3200 110797 720 pixels 4 8 0 p ix e ls scale [1:1] scale [1:x] adjustment of the blanking on the top of the image adjustment of the blanking on the bottom of the image correct by pushing the control disk up or down blanking top bottom left right s...

  • Page 35

    7-12 random access adjustment mode 5975398 barcodata 3200 110797 options highlight options by pushing the control disk up or down and press enter. The geometry options menu will be displayed. The next question will be asked by the projector : 'use the same side keystone correction for all files ? [y...

  • Page 36

    8-1 installation mode 5975398 barcodata 3200 110797 select with or then to return. 8 internal patterns the projector is equipped with different internal patterns which can be used for measurment purposes. Highlight "internal patterns" by pushing the control disk up or down and press enter to display...

  • Page 37

    8-2 installation mode 5975398 barcodata 3200 110797 -0,5 -0 ,2 5 0 0 ,2 5 0,5 1 2 3 4 5 6 80 1 2 0 16 0 2 00 2 40 4 0 30 1 5 -1,5 -1 -0,5 0 0,5 1 1,5 1 2 3 4 5 6 80 120 160 200 240 40 90 60 30 screen width horizontal screen shift 0 -15 -30 maximum 5 mm right lens shift maximum 5 mm left lens shift 0...

  • Page 38

    9-1 service mode 5975398 barcodata 3200 110797 select with or then to return. 9 service mode starting up the service mode push the control disk up or up to highlight service and then press enter. Some items in the service mode are password protected (when the password function is active). Enter your...

  • Page 39

    9-2 service mode 5975398 barcodata 3200 110797 panel adjustment red coarse field flicker black level top black level bottom gain top gain bottom change color+pattern with or select with or then to return. Preset input balance white balance select with to return adjust red with or blue with or servic...

  • Page 40

    9-3 service mode 5975398 barcodata 3200 110797 select with or then to return. Select with or then to return. Change password this item is password protected when the password strap is installed. How to enable or disable the password function ? The password function is enabled when the password strap...

  • Page 41

    9-4 service mode 5975398 barcodata 3200 110797 select with or then to return. Select with or then to return. Reset lamp runtime reset lamp run time is only allowed when a new lamp is installed. Highlight reset lamp run time by pushing the control disk up or up and press enter to select. When reset l...

  • Page 42

    9-5 service mode 5975398 barcodata 3200 110797 select with or then to return. I2c diagnosis d ca lcd driver sc76013 e6h # # # lcd driver sc76013 e8h # # # lcd driver sc76013 eah # # # lcd driver tda8444 48h # # # input selectorpcf8574a 46h # # # input selector pcf8574a7eh # # # decoder pcf8574 4eh #...

  • Page 43

    A-1 appendix a : standard source set up files 5975398 barcodata 3200 110797 a standard source set up files name : name of file, contains the settings resolution : image resolution, when fol- lowed by ...I means interlaced. Fvert hz : vertical frequency of the source fhor khz : horizontal frequency o...

  • Page 44

    A-2 appendix a : standard source set up files 5975398 barcodata 3200 110797 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz xga_70 1024 x 768 70,000 57,050 78,044 1368 1024 815 768 mac_por 640 x 870 74,996 68,846 57,280 832 640 918 870 inter_gr 1184 x 886 67,170 61,796 92,941 1504 118...

  • Page 45

    B-1 lenses 5975398 barcodata 3200 110797 b focusing the lens loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : do not turn out the lens too far, otherwise it will fall out of the lens holder. When the i...

  • Page 46

    B-2 lenses 5975398 barcodata 3200 110797 lenses this appendix gives an overview of the tables and formulas for the available lenses for the barcographics 9200. An overview of all tables, diagrams and formulas can also be found in the manual "installation diagrams for barco projectors", order number ...

  • Page 47

    C-1 source numbers 90 - 99 5975398 barcodata 3200 110797 c follow the steps below to create a second file for sources 0 to 9 : 1. Select the source between 0 and 9. 2. Select the corresponding source number between 90 and 99 with the digit keys on the rcu. 3. Enter the adjustment mode and load a cor...

  • Page 48

    Insert card rcu 5975398 barcodata 3200 110797 " insert card 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6.