1. DL manuals
  2. Barco
  3. Projector
  4. R9001330
  5. Owner's Manual

Barco R9001330 Owner's Manual

Summary of R9001330

  • Page 1

    Owner's manual graphics 8200 r9001330 art. No. :r5975288 date: 110497 barco projection systems owner's manual graphics 8200 r9001330 art. No. :r5975288 date: 110497 barco projection systems.

  • Page 2

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, april 1997. All rights reserved. Trademarks are the rights of their respective owners. Printed in belgium due to constant research, the information in this manual is subject to change ...

  • Page 3

    Table of contents 5975288 barcographics 8200 110497 i-1 table of contents 5975288 barcographics 8200 110497 i-1 warnings & safety instructions ....................................................................................................................................... 1-1 avertissements & ...

  • Page 4

    Table of contents i-2 5975288 barcographics 8200 110497 table of contents i-2 5975288 barcographics 8200 110497 rgb analog input module. ................................................................................................................................................... 7-6 component i...

  • Page 5

    Table of contents 5975288 barcographics 8200 110497 i-3 table of contents 5975288 barcographics 8200 110497 i-3 gamma ............................................................................................................................................................................ 11-15 geo...

  • Page 6

    Table of contents i-4 5975288 barcographics 8200 110497 table of contents i-4 5975288 barcographics 8200 110497 hardwired rcu. .................................................................................................................................................................. 14-2 rcvds...

  • Page 7

    Safety instructions 5975288 barcographics 8200 110497 1-1 safety instructions 5975288 barcographics 8200 110497 1-1 warnings avertissements safety instructions prescriptions de securite on safety securite on installation installation on servicing entretien et reparation on cleaning nettoyage on repa...

  • Page 8

    Prescription de sécurtié 1-2 5975288 barcographics 8200 110497 presciptions de sécurité 1-2 5975288 barcographics 8200 110497 remarque sur la sécurité les projecteurs sont fabriqués conformément aux exigences des normes de sécurité internationales iec950, ul 1950 et csa c22.2 no. 950. Ces normes de ...

  • Page 9

    Safety instructions 5975288 barcographics 8200 110497 1-3 safety instructions 5975288 barcographics 8200 110497 1-3 notice on safety projectors are built in accordance with the requirements of the international safety standards iec950, ul 1950 and csa c22.2 no. 950, which are the safety standards of...

  • Page 10

    Prescription de sécurtié 1-4 5975288 barcographics 8200 110497 presciptions de sécurité 1-4 5975288 barcographics 8200 110497 risque d'electro- cution ne pas ouvrir attention attention : afin de reduire le risque de chocs electriques, ne pas enlever le couvercle (ou le dos) il n'y a pas de pieces re...

  • Page 11

    Safety instructions 5975288 barcographics 8200 110497 1-5 safety instructions 5975288 barcographics 8200 110497 1-5 the lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product are risk of electrical shock to persons. The exclamation point withi...

  • Page 12

    Prescription de sécurtié 1-6 5975288 barcographics 8200 110497 presciptions de sécurité 1-6 5975288 barcographics 8200 110497 instructions pour l’utilisateur : si cet équipement cause des interférences de radio ou de télévision, l’utilisateur peut essayer de corriger les interférences en appliquant ...

  • Page 13

    Safety instructions 5975288 barcographics 8200 110497 1-7 safety instructions 5975288 barcographics 8200 110497 1-7 instructions to the user : if this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following meas...

  • Page 14

    Prescription de sécurtié 1-8 5975288 barcographics 8200 110497 presciptions de sécurité 1-8 5975288 barcographics 8200 110497 * pour débrancher le cordon, le tirer par le connecteur, jamais par le cordon lui-même. * si on utilise une rallonge, vérifier que le total des courants des appareils raccord...

  • Page 15

    Safety instructions 5975288 barcographics 8200 110497 1-9 safety instructions 5975288 barcographics 8200 110497 1-9 * to disconnect the cord, pull it out by the plug. Never pull the cord itself. * if an extension cord is used with this product, make sure that the total of the ampere ratings on the p...

  • Page 16

    Prescription de sécurtié 1-10 5975288 barcographics 8200 110497 presciptions de sécurité 1-10 5975288 barcographics 8200 110497 * laisser suffisamment d’espace autour du projecteur et ne pas obstruer la circulation de l’air. Ne pas mettre des feuilles libres ou d’autres objets plus près de 11 cm du ...

  • Page 17

    Safety instructions 5975288 barcographics 8200 110497 1-11 safety instructions 5975288 barcographics 8200 110497 1-11 * do not block the projector cooling fans or free air movement under and around the projector. Loose papers or other objects may not be nearer to the projector than 4" on any side. O...

  • Page 18

    Prescription de sécurtié 1-12 5975288 barcographics 8200 110497 presciptions de sécurité 1-12 5975288 barcographics 8200 110497 pour garantir les meilleures performance et définition, les objectifs de projection sont spécialement traités avec un revêtement anti-reflets. En conséquence : éviter de to...

  • Page 19

    Safety instructions 5975288 barcographics 8200 110497 1-13 safety instructions 5975288 barcographics 8200 110497 1-13 to ensure the highest optical performance and resolution, the projection lenses are specially treated with an anti-reflective coating, therefore : avoid touching the lens. To remove ...

  • Page 20

    Unpacking & dimensions 5975646 barcographics 8100 090296 unpacking & dimensions 5975646 barcographics 8100 090296 2-1 2-1 unpacking dimensions battery installation on the rcu unpacking dimensions battery installation on the rcu.

  • Page 21

    Unpacking & dimensions 2-2 5975646 barcographics 8100 090296 unpacking & dimensions 2-2 5975646 barcographics 8100 090296 unpacking to open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the proj...

  • Page 22

    Unpacking & dimensions 5975646 barcographics 8100 090296 unpacking & dimensions 5975646 barcographics 8100 090296 2-3 2-3 name lens l min l max (*) mm(inch) mm(inch) hd(1.2:1) 1072 (42.20) 1087 (42.79) hd(2.2:1) 1043 (41.06) 1070 (42.12) hd(3.3:1) 1017 (40.04) 1072 (42.20) hd(3.9:1) 1022 (40.24) 116...

  • Page 23

    Unpacking & dimensions 2-4 5975646 barcographics 8100 090296 unpacking & dimensions 2-4 5975646 barcographics 8100 090296 battery installation in the rcu. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. To install the battery, remo...

  • Page 24

    Installation guidelines 5975288 barcographics 8200 110497 3-1 installation guidelines 3-1 5975288 barcographics 8200 110497 installation guidelines environment what about ambient light? Which screen type? What image size? How big should the image be? Where to install the projector? How to install th...

  • Page 25

    Installation guidelines 3-2 5975288 barcographics 8200 110497 installation guidelines 5975288 barcographics 8200 110497 3-2 installation guidelines careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the...

  • Page 26

    Installation guidelines 5975288 barcographics 8200 110497 3-3 installation guidelines 3-3 5975288 barcographics 8200 110497 * which screen type? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applications. ...

  • Page 27

    Installation guidelines 3-4 5975288 barcographics 8200 110497 installation guidelines 5975288 barcographics 8200 110497 3-4 * where to install the projector? Definitions of the abbreviation on drawings b = distance between ceiling and top of the screen or between floor and bottom of the screen. A = ...

  • Page 28

    Installation guidelines 5975288 barcographics 8200 110497 3-5 installation guidelines 3-5 5975288 barcographics 8200 110497 table mounting of the barcographics 8200 ceiling mounting of the barcographics 8200 s c r e e n p d b ce il in g p r o j e c t o r c d a c d = b - a s h optical axis p rojectio...

  • Page 29

    Installation guidelines 3-6 5975288 barcographics 8200 110497 installation guidelines 5975288 barcographics 8200 110497 3-6 * how to install a projection lens? The barcographics 8200 is supplied without any lens. The following lenses are available as an option : hd(1.2:1) hd(2.2:1) hd(3.3:1) hd(4.0:...

  • Page 30

    Installation set up installation set up 5975288 barcographics 8200 110497 4-1 4-1 5975288 barcographics 8200 110497 installation set up projector configuration installation set up projector configuration.

  • Page 31

    Installation set up 4-2 installation set up 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 4-2 the barcographics 8200 can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. Rear/t ab le rear/ceiling front/ta...

  • Page 32

    Installation set up installation set up 5975288 barcographics 8200 110497 4-3 4-3 5975288 barcographics 8200 110497 to change the configuration, enter the adjustment mode by pushing adjust or enter. Highlight installation by pushing the control disk up or down and press enter to select. The installa...

  • Page 33

    Location and functions of control 5975288 barcographics 8200 110497 5-1 location and functions of control 5975288 barcographics 8200 110497 5-1 location and function of controls front panel terminology local keypad remote control location and function of controls front panel terminology local keypad...

  • Page 34

    Location and functions of control 5-2 location and functions of control 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 5-2 front panel terminology r s 2 3 2 i n r e m o t e p r o j e c t o r m o d e : g r e e n - o p e r a t i o n r e d - s t a n d b y c o m mu n ic at io n p o ...

  • Page 35

    Location and functions of control 5975288 barcographics 8200 110497 5-3 location and functions of control 5975288 barcographics 8200 110497 5-3 control panel terminology a. Local keypad getting access 2 1 4 3 5 6 8 0 9 7 the keypad is located behind a door, screened with the name of the projector. T...

  • Page 36

    Location and functions of control 5-4 location and functions of control 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 5-4 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 enter 1 4 1 3 1 2 9 8 1 2 3 4 5 7 1 5 3 2 a pause - + phase freez 1 0 1 1 text exit adj stby sharpness tint col or b...

  • Page 37

    Location and functions of control 5975288 barcographics 8200 110497 5-5 location and functions of control 5975288 barcographics 8200 110497 5-5 terminology back light key : when activated, all keys will be lighted up and visible in the dark. Adj. : adjust key, to enter the adjustment mode or for qui...

  • Page 38

    Power connection power connection 5975288 barcographics 8200 110497 6-1 6-1 5975288 barcographics 8200 110497 power connection power connection.

  • Page 39

    Power connection 6-2 power connection 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 6-2 power (mains) cord connection decoder mac-input video-input video s-video vga-input rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) 100...

  • Page 40

    Power connection power connection 5975288 barcographics 8200 110497 6-3 6-3 5975288 barcographics 8200 110497 when switching on with the power switch, the projector starts in the stand by mode. The projector mode indication lamp is red. To start image projection : a. Press the 'stand by' button on t...

  • Page 41

    Power connection 6-4 power connection 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 6-4 when the total run time of the lamp is 970 hours or more, the following message will be displayed for 1 minute. This message will be repeated every 30 minutes. Press exit to remove the messa...

  • Page 42

    Connections connections 5975288 barcographics 8200 110497 7-1 7-1 5975288 barcographics 8200 110497 input module connections module insertion into the projector. Video/s-video input module rgb analog input module component input module rgb3s/rg3sb input module peripheral equipment connection connect...

  • Page 43

    Connections connections 7-2 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 7-2 the projector has modular input facilities. The input slots can be filled up with the following modules : video, s-video (pal, secam, ntsc) input order no. R9827900 rgbs/rgsb analog input order no. : ...

  • Page 44

    Connections connections 5975288 barcographics 8200 110497 7-3 7-3 5975288 barcographics 8200 110497 video/s-video input module to the video input : composite video signals from a vcr, off air signal decoder, etc... 1 x bnc 1.0vpp ± 3 db to the s-video input : separate y-luma/c-chroma signals for hig...

  • Page 45

    Connections connections 7-4 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 7-4 push the control disk up or down to highlight installation and press enter to display the installation menu. Exit returns to operational mode. Adjustment mode select a path from below : guided random ...

  • Page 46

    Connections connections 5975288 barcographics 8200 110497 7-5 7-5 5975288 barcographics 8200 110497 straps on module level. Floating or non-floating input. Video input : j11 : strap "yes" : non floating strap "no" : floating s-video input : j12 : strap "yes" : non floating strap "no" : floating j13 ...

  • Page 47

    Connections connections 7-6 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 7-6 rgb analog input terminals with separate horizontal and vertical sync inputs(rgb-hv), with composite sync input(rgb-s) or with sync signals on green(rgsb). Always use an interface when a computer and ...

  • Page 48

    Connections connections 5975288 barcographics 8200 110497 7-7 7-7 5975288 barcographics 8200 110497 rgb input selection : key in the corresponding slot number on the rcu or the local keypad. Straps on module level : floating or non-floating input. Red : j3 : strap "yes" : non floating strap "no" : f...

  • Page 49

    Connections connections 7-8 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 7-8 adjustment mode select a path from below : guided random access installation service source 01 select with or then to return. Select with or then to return. Input slots 1. Rgb-ss [cv] 2. Rgb-sog 3. Vi...

  • Page 50

    Connections connections 5975288 barcographics 8200 110497 7-9 7-9 5975288 barcographics 8200 110497 component input module. Connect your component signals (y-luma, r-y and b-y), e.G. A professional vcr to the component input module. Component video : 4 x bnc r-y : 0.7 vpp ± 3 db b-y : 0.7 vpp ± 3 db...

  • Page 51

    Connections connections 7-10 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 7-10 component input selection : key in the corresponding slot number on the rcu or the local keypad. Indication on the input slot menu : component video-ss = component video with separate sync component...

  • Page 52

    Connections connections 5975288 barcographics 8200 110497 7-11 7-11 5975288 barcographics 8200 110497 rgb3s/rg3sb input module. Connect your rgb signals with tri-level sync, e.G. A professional vcr to the rgb 3 level sync input module. Rgb3s/rg3sb analog : 5 x bnc red :0.7 vpp ± 3 db blue : 0.7 vpp ...

  • Page 53

    Connections connections 7-12 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 7-12 straps on module level : floating or non-floating input. Red : j3 : strap "yes" : non floating strap "no" : floating green : j4 : strap "yes" : non floating strap "no" : floating blue : j5 : strap "...

  • Page 54

    Connections connections 5975288 barcographics 8200 110497 7-13 7-13 5975288 barcographics 8200 110497 connecting a computer, e.G. Ibm pc (or compatible), apple macintosh to the rs 232 input of the projector. R s 2 3 2 connecti on r g r g 1 0 0 - 2 3 0 v 9 - 4 a 6 0 - 5 0 h z r s 2 32 o u t 0 i t hi ...

  • Page 55

    Connections connections 7-14 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 7-14 connecting a rcvds 05 to the projector. - up to 10 or 20 inputs(video) with the rcvds 05 and 90 inputs when rcvds's are linked via the expansion module. - serial communication with the projector. - ...

  • Page 56

    Controlling controlling 5975288 barcographics 8200 110497 8-1 8-1 5975288 barcographics 8200 110497 controlling how to use the rcu. Projector address how to display a projector address. How to program an address into the rcu. Picture controls with direct access. Controlling how to use the rcu. Proje...

  • Page 57

    Controlling 8-2 controlling 8-2 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 the barcographics 8200 can be controlled with a. The rcu b. The hardwired rcu (cable is not included) c. The local keypad. Controlling the projector with the rcu and the hardwired rcu is equal. How to...

  • Page 58

    Controlling controlling 5975288 barcographics 8200 110497 8-3 8-3 5975288 barcographics 8200 110497 c) point the front of the rcu directly at one of the ir sensors of the projector. 0 9 7 8 6 5 4 3 2 1 r c u ce ilin g f ro nt o f projec to r ir s e ns o r 0 9 7 8 6 5 4 3 2 1 r c u r ea r o f p ro je...

  • Page 59

    Controlling 8-4 controlling 8-4 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 how to display a projector address? Press the address key (recessed key on the rcu) with a pencil. The projector's address will be displayed in a 'text box'. This text box disappears after a few secon...

  • Page 60

    Controlling controlling 5975288 barcographics 8200 110497 8-5 8-5 5975288 barcographics 8200 110497 contrast control a correct 'contrast' setting is important for good image reproduction. Adjust the contrast to the level you prefer, according to room lighting conditions. Use the + button for a highe...

  • Page 61

    Start up of the adjustment mode 9-1 start up of the adjustment mode 9-1 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 start up of the adjustment mode start up of the adjustment mode.

  • Page 62

    Start up of the adjustment mode 9-2 start up of the adjustment mode 9-2 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 adjustment mode all source set ups, picture tunings and geometry are made while in the 'adjustment mode' . Press the adjust or enter key to enter the 'adjustmen...

  • Page 63

    Start up of the adjustment mode 9-3 start up of the adjustment mode 9-3 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 some items in the adjustment mode are password protected. While selecting such an item, the projector asks to enter your password (password protection is only a...

  • Page 64

    Guided adjustment mode 5975288 barcographics 8200 110497 10-1 guided adjustment mode 5975288 barcographics 8200 110497 10-1 guided adjustment mode guided adjustment mode.

  • Page 65

    Guided adjustment mode 10-2 5975288 barcographics 8200 110497 guided adjustment mode 10-2 5975288 barcographics 8200 110497 select with or then to return. Adjustment mode select a path from below : guided random access installation service source 01 the guided adjustment mode is not active. The guid...

  • Page 66

    Random access adjustment mode 5975288 barcographics 8200 110497 11-1 random access adjustment mode 11-1 5975288 barcographics 8200 110497 random access adjustment mode file service picture tuning geometry random access adjustment mode file service picture tuning geometry.

  • Page 67

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-2 11-2 starting up the random access adjustment mode push the control disk up or down to highlight 'random access' and then press enter. Adjustment mode select a path fr...

  • Page 68

    Random access adjustment mode 5975288 barcographics 8200 110497 11-3 random access adjustment mode 11-3 5975288 barcographics 8200 110497 file service before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources...

  • Page 69

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-4 11-4 load file push the control disk up or down to select load and press enter to display the load menu. The load menu displays the corresponding files depending on th...

  • Page 70

    Random access adjustment mode 5975288 barcographics 8200 110497 11-5 random access adjustment mode 11-5 5975288 barcographics 8200 110497 edit file the edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source speci...

  • Page 71

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-6 11-6 up or down to scroll to desired digit. When finished press enter to confirm. C. Counting up or down by pushing the control disk to the right or to the left. How f...

  • Page 72

    Random access adjustment mode 5975288 barcographics 8200 110497 11-7 random access adjustment mode 11-7 5975288 barcographics 8200 110497 options source number : the source number of a non-active source can be changed to any other source number. This makes it possible to create a file for future sou...

  • Page 73

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-8 11-8 vertical refresh [sync/async] : the way of updating the image information on the lcd panels. For moving images, the vertical refresh has to be done on a synchrono...

  • Page 74

    Random access adjustment mode 5975288 barcographics 8200 110497 11-9 random access adjustment mode 11-9 5975288 barcographics 8200 110497 rename to change the name of a selected file. Use the control disk to select rename and press enter. The rename selection menu will be displayed. Select with or t...

  • Page 75

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-10 11-10 copy to copy a selected file into a new file. Use the control disk to select copy and press enter. The copy selection menu will be displayed. Use the control di...

  • Page 76

    Random access adjustment mode 5975288 barcographics 8200 110497 11-11 random access adjustment mode 11-11 5975288 barcographics 8200 110497 delete to delete a selected file out of the list of files. Use the control disk to select delete and press enter. The delete selection menu will be displayed. S...

  • Page 77

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-12 11-12 file options use the control disk to select options and press enter. The option selection menu will be displayed. Select with or then to return. File service lo...

  • Page 78

    Random access adjustment mode 5975288 barcographics 8200 110497 11-13 random access adjustment mode 11-13 5975288 barcographics 8200 110497 sync slow/fast highlight sync by pushing the control disk up or down and press enter to toggle between slow and fast. Note : sync is normally used in the slow p...

  • Page 79

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-14 11-14 color balance highlight color balance by pushing the control disk up or down and press enter to select the color balance selection menu. The next choices are po...

  • Page 80

    Random access adjustment mode 5975288 barcographics 8200 110497 11-15 random access adjustment mode 11-15 5975288 barcographics 8200 110497 gamma with the gamma correction adjustment, it is possible to bring the details in dark image parts more to the front (lower image values) or to reduce the impo...

  • Page 81

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-16 11-16 geometry highlight geometry by pushing the control disk up or down and press enter to select the geometry selection menu. The following adjustment are possible ...

  • Page 82

    Random access adjustment mode 5975288 barcographics 8200 110497 11-17 random access adjustment mode 11-17 5975288 barcographics 8200 110497 size highlight size by pushing the control disk up or down and press enter to select. Select with or then to return. Geometry shift size side keystone blanking ...

  • Page 83

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-18 11-18 side keystone highlight side keystone by pushing the control disk up or down and press enter to select. The side keystone adjustment is used to align the image ...

  • Page 84

    Random access adjustment mode 5975288 barcographics 8200 110497 11-19 random access adjustment mode 11-19 5975288 barcographics 8200 110497 blanking highlight blanking by pushing the control disk up or down and press enter to select. Select with or then to return. Geometry shift size side keystone b...

  • Page 85

    Random access adjustment mode 5975288 barcographics 8200 110497 random access adjustment mode 5975288 barcographics 8200 110497 11-20 11-20 blanking top bottom left right select with or then to return. Adjustment of the blanking on the of the image adjustment of the blanking on the bottom of the ima...

  • Page 86

    Random access adjustment mode 5975288 barcographics 8200 110497 11-21 random access adjustment mode 11-21 5975288 barcographics 8200 110497 options highlight options by pushing the control disk up or down and press enter. The geometry options menu will be displayed. The next question will be asked b...

  • Page 87

    Installation 12-1 installation 5975288 barcographics 8200 110497 12-1 5975288 barcographics 8200 110497 installation convergence configuration internal patterns installation convergence configuration internal patterns.

  • Page 88

    Installation 12-2 installation 12-2 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 starting up the installation mode push the control disk up or down to highlight installation and then press enter. Select with or then to return. Adjustment mode select a path from below : guided ...

  • Page 89

    Installation 12-3 installation 5975288 barcographics 8200 110497 12-3 5975288 barcographics 8200 110497 input slots highlight input slots by pushing the control disk up or down and press enter. The internal system will scan the input slots and displays the result in the input slots menu. Source indi...

  • Page 90

    Installation 12-4 installation 12-4 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 convergence highlight "convergence" by pushing the control disk up or down and press enter to display the convergence selection menu. Every lcd panel has 6 adjustment screws. By turning these scre...

  • Page 91

    Installation 12-5 installation 5975288 barcographics 8200 110497 12-5 5975288 barcographics 8200 110497 to adjust the convergence, there are test patterns provided in the convergence menu. Use the control disk to hightlight convergence and press enter to display the convergence menu. Start with the ...

  • Page 92

    Installation 12-6 installation 12-6 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 the three alignments influence each other, therefore repeat if neces- sary the above three steps (b,c and d). When the green pattern is correctly focused, press exit to return to the convergence m...

  • Page 93

    Installation 12-7 installation 5975288 barcographics 8200 110497 12-7 5975288 barcographics 8200 110497 if both lines are correctly converged, continue with screw 4. Adjust screw 4 until line 4 is correctly converged. It is possible that line 2 and 3 have to be reconverged. If so, repeat procedure f...

  • Page 94

    Installation 12-8 installation 12-8 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 blue on green convergence. Use the control disk to highlight blue on green and press enter to display the blue on green test pattern. Repeat the same procedure as for red on green lines but read b...

  • Page 95

    Installation 12-9 installation 5975288 barcographics 8200 110497 12-9 5975288 barcographics 8200 110497 configuration highlight "configuration" by pushing the control disk up or down and press enter to select. For more information, see projector configuration in chapter installa- tion set up. Select...

  • Page 96

    Service mode 5975288 barcographics 8200 110497 13-1 service mode 5975288 barcographics 8200 110497 13-1 service mode identification change password change language change projector address change baudrate pc reset lamp run time lamp run time history panel adjustments preset color balance i²c diagnos...

  • Page 97

    Service mode 13-2 5975288 barcographics 8200 110497 service mode 13-2 5975288 barcographics 8200 110497 starting up the service mode push the control disk up or down to highlight service and then press enter. Some items in the service mode are password protected (when the password function is active...

  • Page 98

    Service mode 5975288 barcographics 8200 110497 13-3 service mode 5975288 barcographics 8200 110497 13-3 service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history more... Select with or then to return. Service panel adjustme...

  • Page 99

    Service mode 13-4 5975288 barcographics 8200 110497 service mode 13-4 5975288 barcographics 8200 110497 service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history more... Select with or then to return. Service panel adjustme...

  • Page 100

    Service mode 5975288 barcographics 8200 110497 13-5 service mode 5975288 barcographics 8200 110497 13-5 select with or then to return. Service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history more... Identification to disp...

  • Page 101

    Service mode 13-6 5975288 barcographics 8200 110497 service mode 13-6 5975288 barcographics 8200 110497 - baud rate : transfer speed for communication with a ibm pc (or compatible) or mac. The baud rate of the projector must be the same as the baud rate of the connected computer. When there is a dif...

  • Page 102

    Service mode 5975288 barcographics 8200 110497 13-7 service mode 5975288 barcographics 8200 110497 13-7 r b v r b v 1 00 - 2 3 0 v 9 - 4 a 60 - 50 h z rs 232 o ut 0 i t h is de vic e com pli es wi th pa rt 15 of th e f cc ru les . Op era ti on is su bje ct to fo llo win g two co nd iti ons : (1 ) t ...

  • Page 103

    Service mode 13-8 5975288 barcographics 8200 110497 service mode 13-8 5975288 barcographics 8200 110497 when the strap is on leg 2-3 or no strap is mounted, the password function is enabled, when the strap is on leg 1-2, the password function is disabled. Password enabled strap on leg 2-3 password d...

  • Page 104

    Service mode 5975288 barcographics 8200 110497 13-9 service mode 5975288 barcographics 8200 110497 13-9 how to change the password ? Highlight change password by pushing the control disk up or down and press enter to display the change password menu. Select with or then to return. Service identifica...

  • Page 105

    Service mode 13-10 5975288 barcographics 8200 110497 service mode 13-10 5975288 barcographics 8200 110497 change projector address every projector requires an individual address between 0 and 255. This address can be software installed. To change that address, push the control disk up or down to hig...

  • Page 106

    Service mode 5975288 barcographics 8200 110497 13-11 service mode 5975288 barcographics 8200 110497 13-11 the following baud rates are available : - 9600 - 4800 - 2400 - 1200 - 600 - 300 - 150 - 75 the actual baud rate will be highlighted. To change the baud rate, push the control disk up or down an...

  • Page 107

    Service mode 13-12 5975288 barcographics 8200 110497 service mode 13-12 5975288 barcographics 8200 110497 lamp run time history to get an overview of the different lamp run times, highlight lamp run time history by pushing the control disk up or down and press enter. A listing with the lamp serial n...

  • Page 108

    Service mode 5975288 barcographics 8200 110497 13-13 service mode 5975288 barcographics 8200 110497 13-13 panel adjustments changing these settings may seriously affect the performance of the projector. All panel adjustments are factory adjusted. If not really necessary, do not touch one of these ad...

  • Page 109

    Service mode 13-14 5975288 barcographics 8200 110497 service mode 13-14 5975288 barcographics 8200 110497 select with or then to return. Service panel adjustments preset input balance 60hz tracking i2c diagnosis more... Preset input balance white balance select with to return adjust red with or blue...

  • Page 110

    Service mode 5975288 barcographics 8200 110497 13-15 service mode 5975288 barcographics 8200 110497 13-15 60 hz tracking 60 hz tracking is used to adjust the 60 hz by sychronious signals highlight 60 hz tracking by pushing the control disk up or down and press enter. When 60 hz tracking is selected ...

  • Page 111

    Service mode 13-16 5975288 barcographics 8200 110497 service mode 13-16 5975288 barcographics 8200 110497 select with or then to return. I2c diagnosis d ca lcd driver sc76013 e2h # # # lcd driver sc76013 e4h # # # lcd driver sc76013 ech # # # lcd driver sc76013 eeh # # # lcd driver tda8444 48h # # #...

  • Page 112

    Optional equipment 5975288 barcographics 8200 110497 14-1 optional equipment 5975288 barcographics 8200 110497 14-1 optional equipment ir remote receiver hardwired rcu rcvds05 vs05 magik interface adapter and communication cables ceiling mount kit cm100 transport handle frame for dual or triple proj...

  • Page 113

    Optional equipment 14-2 5975288 barcographics 8200 110497 optional equipment 14-2 5975288 barcographics 8200 110497 ir receiver 800 this infra red receiver unit makes it possible to control the barcographics 8200 from another room. There is a communication line with cable between the ir receiver and...

  • Page 114

    Optional equipment 5975288 barcographics 8200 110497 14-3 optional equipment 5975288 barcographics 8200 110497 14-3 rcvds 800 / rcvds 05 an optional rcvds 05 source selector makes it possible to connect up to 10 (20 if video) sources to the projector. When rcvds's are linked via the expansion module...

  • Page 115

    Optional equipment 14-4 5975288 barcographics 8200 110497 optional equipment 14-4 5975288 barcographics 8200 110497 magik interface multifuctional analog graphics interface kit. Barco's magik interface allows the user to connect a presentation device such as a projector or a professional monitor to ...

  • Page 116

    Optional equipment 5975288 barcographics 8200 110497 14-5 optional equipment 5975288 barcographics 8200 110497 14-5 number r9827640; and 30 m (100ft), order number r9827570 b. Din mini8-d9 adapter cable. - to connect a macintosh computer to the barcographics 8200. (only if the optional rs232 port is...

  • Page 117

    Optional equipment 14-6 5975288 barcographics 8200 110497 optional equipment 14-6 5975288 barcographics 8200 110497 projector transport handle 0 .7 2 m 1 . 1 5 m order number : r9829170 projector frame for dual or triple configurations the frame is designed for use in table as well as ceiling mount ...

  • Page 118

    Optional equipment 5975288 barcographics 8200 110497 14-7 optional equipment 5975288 barcographics 8200 110497 14-7 multifunctional flight case barco's multifunctional flight case is a special designed flight case for temporary installations of a barcographics 8200 projector. Due to the advanced mec...

  • Page 119

    Optional equipment 14-8 5975288 barcographics 8200 110497 optional equipment 14-8 5975288 barcographics 8200 110497 mechanical shutter barco's mechanical shutter can be used there where the display has to be totally black when the projector is set in pauze. This can be very useful when the projector...

  • Page 120

    Appendix a : standard source set up files 5975288 barcographics 8200 110497 a-1 appendix a : standard source set up files 5975288 barcographics 8200 110497 a-1 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz cga 640 x 200 59,924 15,700 14,318 912 640 262 200 ntsc 675 x 240i 29,970 15,...

  • Page 121

    Appendix a : standard source set up files a-2 5975288 barcographics 8200 110497 appendix a : standard source set up files a-2 5975288 barcographics 8200 110497 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz mac_4 560 x 384 60,147 24,480 17,234 704 560 407 384 8514-a 1024 x 384i 43,47...

  • Page 122

    Appendix a : standard source set up files 5975288 barcographics 8200 110497 a-3 appendix a : standard source set up files 5975288 barcographics 8200 110497 a-3 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz xga_75 1024 x 768 75,781 61,080 86,000 1408 1024 806 768 xga75_gs 1024 x 768 ...

  • Page 123

    Appendix a : standard source set up files a-4 5975288 barcographics 8200 110497 appendix a : standard source set up files a-4 5975288 barcographics 8200 110497 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz pc98_1 640 x 400 56,416 24,823 21,050 848 640 440 400 pc98_2 1120 x 375i 79,9...

  • Page 124

    Appendix b : battery replacement in the rcu 5975288 barcographics 8200 110497 b-1 appendix b : battery replacement in the rcu 5975288 barcographics 8200 110497 b-1 battery replacement in the rcu. Remove the battery cover on he backside of the remote control by pushing the indicated handle a little t...

  • Page 125

    Appendix c : focusing the lens 5975288 barcographics 8200 110497 c-1 appendix c : focusing the lens 5975288 barcographics 8200 110497 c-1 focusing the lens len s hol der fa sten er l e n s loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel t...

  • Page 126

    Appendix d : lens cleaning procedure 5975288 barcographics 8200 110497 d-1 appendix d : lens cleaning procedure 5975288 barcographics 8200 110497 d-1 lens cleaning procedure cleaning procedure for hd(1.5-3:1) lens and hd(3-5.3:1) lens. To minimize the possibility of damaging the optical coating or s...

  • Page 127

    Appendix d : lens cleaning procedure d-2 5975288 barcographics 8200 110497 appendix d : lens cleaning procedure d-2 5975288 barcographics 8200 110497 the lens. Wipe at a speed that is equal to the evaporation rate. This is very important to prevent streaking and spotting. Start your wiping at one si...

  • Page 128

    Appendix e : source number 90 - 99 5975288 barcographics 8200 110497 e-1 appendix e : source number 90 - 99 5975288 barcographics 8200 110497 e-1 source numbers 90 - 99 these source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a rcvds 05 or ...

  • Page 129

    Appendix f : lenses 5975288 barcographics 8200 110497 f-1 appendix f : lenses 5975288 barcographics 8200 110497 f-1 lenses this appendix gives an overview of the tables and formulas for the available lenses for the barcographics 8200. The next lenses are available : name length lens diam. Lens weigh...

  • Page 130

    Appendix f : lenses f-2 5975288 barcographics 8200 110497 appendix f : lenses f-2 5975288 barcographics 8200 110497 lens formulas to calculate the projector distance. Hd(1.2:1) metric pd=1.264 x sw + 0.126 + (0.018/sw) inch pd= 1.264 x sw + 4.961 + (27.90/sw) hd(2.2:1) metric pd=2.0566 x sw + 0.16 +...

  • Page 131

    Insert card rcu 5975288 barcographics 8200 110497 insert card rcu 5975288 barcographics 8200 110497 p r c u input s o urces 1 pr o j ec t o r r c v d s 2 3 4 5 6 1 2 3 5 6 7 8 9 1 0 inpu t s o urces 7 p r c u input s o urces 1 pr o j ec t o r r c v d s 2 3 4 5 6 1 2 3 5 6 7 8 9 1 0 inpu t s o urces ...