1. DL manuals
  2. Barco
  3. Projector
  4. R9001338
  5. Owner's Manual

Barco R9001338 Owner's Manual

Summary of R9001338

  • Page 1

    Owner's manual graphics 8200lc r9001338 r9001339 art. No. :r5975288a date: 150597 barco projection systems owner's manual graphics 8200lc r9001338 r9001339 art. No. :r5975288a date: 150597 barco projection systems.

  • Page 2

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, may 1997. All rights reserved. Trademarks are the rights of their respective owners. Printed in belgium due to constant research, the information in this manual is subject to change wi...

  • Page 3

    Table of contents 5975288a barcographics 8200lc 150597 i-1 table of contents 5975288a barcographics 8200lc 150597 i-1 warnings & safety instructions ........................................................................................................................................ 1-1 avertissem...

  • Page 4

    Table of contents i-2 5975288a barcographics 8200lc 150597 table of contents i-2 5975288a barcographics 8200lc 150597 rgb analog input module. .................................................................................................................................................... 7-6 comp...

  • Page 5

    Table of contents 5975288a barcographics 8200lc 150597 i-3 table of contents 5975288a barcographics 8200lc 150597 i-3 gamma ............................................................................................................................................................................ 11-...

  • Page 6

    Table of contents i-4 5975288a barcographics 8200lc 150597 table of contents i-4 5975288a barcographics 8200lc 150597 hardwired rcu. .................................................................................................................................................................. 14-2...

  • Page 7

    Safety instructions 5975288a barcographics 8200lc 150597 1-1 safety instructions 5975288a barcographics 8200lc 150597 1-1 warnings avertissements safety instructions prescriptions de securite on safety securite on installation installation on servicing entretien et reparation on cleaning nettoyage o...

  • Page 8

    Prescription de sécurtié 1-2 5975288a barcographics 8200lc 150597 presciptions de sécurité 1-2 5975288a barcographics 8200lc 150597 remarque sur la sécurité les projecteurs sont fabriqués conformément aux exigences des normes de sécurité internationales iec950, ul 1950 et csa c22.2 no. 950. Ces norm...

  • Page 9

    Safety instructions 5975288a barcographics 8200lc 150597 1-3 safety instructions 5975288a barcographics 8200lc 150597 1-3 notice on safety projectors are built in accordance with the requirements of the international safety standards iec950, ul 1950 and csa c22.2 no. 950, which are the safety standa...

  • Page 10

    Prescription de sécurtié 1-4 5975288a barcographics 8200lc 150597 presciptions de sécurité 1-4 5975288a barcographics 8200lc 150597 risque d'electro- cution ne pas ouvrir attention attention : afin de reduire le risque de chocs electriques, ne pas enlever le couvercle (ou le dos) il n'y a pas de pie...

  • Page 11

    Safety instructions 5975288a barcographics 8200lc 150597 1-5 safety instructions 5975288a barcographics 8200lc 150597 1-5 the lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product are risk of electrical shock to persons. The exclamation point...

  • Page 12

    Prescription de sécurtié 1-6 5975288a barcographics 8200lc 150597 presciptions de sécurité 1-6 5975288a barcographics 8200lc 150597 instructions pour l’utilisateur : si cet équipement cause des interférences de radio ou de télévision, l’utilisateur peut essayer de corriger les interférences en appli...

  • Page 13

    Safety instructions 5975288a barcographics 8200lc 150597 1-7 safety instructions 5975288a barcographics 8200lc 150597 1-7 instructions to the user : if this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the followin...

  • Page 14

    Prescription de sécurtié 1-8 5975288a barcographics 8200lc 150597 presciptions de sécurité 1-8 5975288a barcographics 8200lc 150597 * pour débrancher le cordon, le tirer par le connecteur, jamais par le cordon lui-même. * si on utilise une rallonge, vérifier que le total des courants des appareils r...

  • Page 15

    Safety instructions 5975288a barcographics 8200lc 150597 1-9 safety instructions 5975288a barcographics 8200lc 150597 1-9 * to disconnect the cord, pull it out by the plug. Never pull the cord itself. * if an extension cord is used with this product, make sure that the total of the ampere ratings on...

  • Page 16

    Prescription de sécurtié 1-10 5975288a barcographics 8200lc 150597 presciptions de sécurité 1-10 5975288a barcographics 8200lc 150597 * laisser suffisamment d’espace autour du projecteur et ne pas obstruer la circulation de l’air. Ne pas mettre des feuilles libres ou d’autres objets plus près de 11 ...

  • Page 17

    Safety instructions 5975288a barcographics 8200lc 150597 1-11 safety instructions 5975288a barcographics 8200lc 150597 1-11 * do not block the projector cooling fans or free air movement under and around the projector. Loose papers or other objects may not be nearer to the projector than 4" on any s...

  • Page 18

    Prescription de sécurtié 1-12 5975288a barcographics 8200lc 150597 presciptions de sécurité 1-12 5975288a barcographics 8200lc 150597 pour garantir les meilleures performance et définition, les objectifs de projection sont spécialement traités avec un revêtement anti-reflets. En conséquence : éviter...

  • Page 19

    Safety instructions 5975288a barcographics 8200lc 150597 1-13 safety instructions 5975288a barcographics 8200lc 150597 1-13 to ensure the highest optical performance and resolution, the projection lenses are specially treated with an anti-reflective coating, therefore : avoid touching the lens. To r...

  • Page 20

    Prescription de sécurtié 1-14 5975288a barcographics 8200lc 150597 presciptions de sécurité 1-14 5975288a barcographics 8200lc 150597.

  • Page 21

    Unpacking & dimensions 5975288a barcographics 8200lc 150597 unpacking & dimensions 5975288a barcographics 8200lc 150597 2-1 2-1 unpacking dimensions battery installation on the rcu unpacking dimensions battery installation on the rcu.

  • Page 22

    Unpacking & dimensions 2-2 5975288a barcographics 8200lc 150597 unpacking & dimensions 2-2 5975288a barcographics 8200lc 150597 unpacking to open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, th...

  • Page 23

    Unpacking & dimensions 5975288a barcographics 8200lc 150597 unpacking & dimensions 5975288a barcographics 8200lc 150597 2-3 2-3 name lens l min l max (*) mm(inch) mm(inch) hd(1.2:1) 1072 (42.20) 1087 (42.79) hd(2.2:1) 1043 (41.06) 1070 (42.12) hd(3.3:1) 1017 (40.04) 1072 (42.20) hd(3.9:1) 1022 (40.2...

  • Page 24

    Unpacking & dimensions 2-4 5975288a barcographics 8200lc 150597 unpacking & dimensions 2-4 5975288a barcographics 8200lc 150597 battery installation in the rcu. A battery is delivered inside the plastic bag with the power cord. To install the battery, remove the battery cover on the backside of the ...

  • Page 25

    Installation guidelines 5975288a barcographics 8200lc 150597 3-1 installation guidelines 3-1 5975288a barcographics 8200lc 150597 installation guidelines environment what about ambient light? Which screen type? What image size? How big should the image be? Where to install the projector? How to inst...

  • Page 26

    Installation guidelines 3-2 5975288a barcographics 8200lc 150597 installation guidelines 5975288a barcographics 8200lc 150597 3-2 installation guidelines careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use ...

  • Page 27

    Installation guidelines 5975288a barcographics 8200lc 150597 3-3 installation guidelines 3-3 5975288a barcographics 8200lc 150597 * which screen type? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applicat...

  • Page 28

    Installation guidelines 3-4 5975288a barcographics 8200lc 150597 installation guidelines 5975288a barcographics 8200lc 150597 3-4 * where to install the projector? Definitions of the abbreviation on drawings b = distance between ceiling and top of the screen or between floor and bottom of the screen...

  • Page 29

    Installation guidelines 5975288a barcographics 8200lc 150597 3-5 installation guidelines 3-5 5975288a barcographics 8200lc 150597 table mounting of the barcographics 8200lc ceiling mounting of the barcographics 8200lc screen pd b ceiling projector cd a cd = b - a sh optical axis projection lens sh s...

  • Page 30

    Installation guidelines 3-6 5975288a barcographics 8200lc 150597 installation guidelines 5975288a barcographics 8200lc 150597 3-6 * how to install a projection lens? The barcographics 8200lc is supplied without any lens. The following lenses are available as an option : hd(0.9:1) (only for on-axis) ...

  • Page 31

    Installation set up installation set up 5975288a barcographics 8200lc 150597 4-1 4-1 5975288a barcographics 8200lc 150597 installation set up projector configuration installation set up projector configuration.

  • Page 32

    Installation set up 4-2 installation set up 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 4-2 the barcographics 8200lc can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. Rear/table rear/ceiling fr...

  • Page 33

    Installation set up installation set up 5975288a barcographics 8200lc 150597 4-3 4-3 5975288a barcographics 8200lc 150597 to change the configuration, enter the adjustment mode by pushing adjust or enter . Highlight installation by pushing the control disk up or down and press enter to select. The i...

  • Page 34

    Installation set up 4-4 installation set up 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 4-4.

  • Page 35

    Location and function of controls 5975288a barcographics 8200lc 150597 5-1 location and function of controls 5975288a barcographics 8200lc 150597 5-1 location and function of controls front panel terminology local keypad remote control location and function of controls front panel terminology local ...

  • Page 36

    Location and function of controls 5-2 location and function of controls 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 5-2 front panel terminology rs 232 in remote projector mode : green - operation red - st andby communication port (800-peripherals) 100 - 230 v 9 - 4 a 60...

  • Page 37

    Location and function of controls 5975288a barcographics 8200lc 150597 5-3 location and function of controls 5975288a barcographics 8200lc 150597 5-3 control panel terminology a. Local keypad gaining access 2 1 4 3 5 6 8 0 9 7 the keypad is located behind a door, screened with the name of the projec...

  • Page 38

    Location and function of controls 5-4 location and function of controls 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 5-4 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 enter 14 13 12 9 8 1 2 3 4 5 7 15 32a pause - + phase freez 10 11 text exit adj stby sharpness tint color brig...

  • Page 39

    Location and function of controls 5975288a barcographics 8200lc 150597 5-5 location and function of controls 5975288a barcographics 8200lc 150597 5-5 terminology back light key : when activated, all keys will be lighted up and visible in the dark. Adj. : adjust key, to enter the adjustment mode or f...

  • Page 40

    Location and function of controls 5-6 location and function of controls 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 5-6.

  • Page 41

    Power connection power connection 5975288a barcographics 8200lc 150597 6-1 6-1 5975288a barcographics 8200lc 150597 power connection power connection.

  • Page 42

    Power connection 6-2 power connection 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 6-2 power (mains) cord connection decoder mac-input video-input video s-video vga-input rs 232 in remote projector mode : green - operation red - standby communication port (800-peripheral...

  • Page 43

    Power connection power connection 5975288a barcographics 8200lc 150597 6-3 6-3 5975288a barcographics 8200lc 150597 when switching on with the power switch, the projector starts in the stand by mode. The projector mode indication lamp is red. To start image projection : a. Press the 'stand by' butto...

  • Page 44

    Power connection 6-4 power connection 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 6-4 when the total run time of the lamp is 970 hours or more, the following message will be displayed for 1 minute. This message will be repeated every 30 minutes. Press exit to remove the...

  • Page 45

    Connections connections 5975288a barcographics 8200lc 150597 7-1 7-1 5975288a barcographics 8200lc 150597 input module connections module insertion into the projector. Video/s-video input module rgb analog input module component input module rgb3s/rg3sb input module peripheral equipment connection c...

  • Page 46

    Connections connections 7-2 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 7-2 the projector has modular input facilities. The input slots can be filled up with the following modules : video, s-video input order no. R9827900 rgbs/rgsb analog input order no. : r9827910 rgb3...

  • Page 47

    Connections connections 5975288a barcographics 8200lc 150597 7-3 7-3 5975288a barcographics 8200lc 150597 video/s-video input module to the video input : composite video signals from a vcr, off air signal decoder, etc... 1 x bnc 1.0vpp ± 3 db to the s-video input : separate y-luma/c-chroma signals f...

  • Page 48

    Connections connections 7-4 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 7-4 push the control disk up or down to highlight installation and press enter to display the installation menu. Exit returns to operational mode. Adjustment mode select a path from below : guided r...

  • Page 49

    Connections connections 5975288a barcographics 8200lc 150597 7-5 7-5 5975288a barcographics 8200lc 150597 straps on module level. Floating or non-floating input. Video input : j11 : strap "yes" : non floating strap "no" : floating s-video input : j12 : strap "yes" : non floating strap "no" : floatin...

  • Page 50

    Connections connections 7-6 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 7-6 rgb analog input terminals with separate horizontal and vertical sync inputs(rgb-hv), with composite sync input(rgb-s) or with sync signals on green(rgsb). Always use an interface when a compute...

  • Page 51

    Connections connections 5975288a barcographics 8200lc 150597 7-7 7-7 5975288a barcographics 8200lc 150597 rgb input selection : key in the corresponding slot number on the rcu or the local keypad. Straps on module level : floating or non-floating input. Red : j3 : strap "yes" : non floating strap "n...

  • Page 52

    Connections connections 7-8 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 7-8 adjustment mode select a path from below : guided random access installation service source 01 select with or then to return. Select with or then to return. Input slots 1. Rgb-ss [cv] 2. Rgb-sog...

  • Page 53

    Connections connections 5975288a barcographics 8200lc 150597 7-9 7-9 5975288a barcographics 8200lc 150597 component input module. Connect your component signals (y-luma, r-y and b-y), e.G. A professional vcr to the component input module. Component video : 4 x bnc r-y : 0.7 vpp ± 3 db b-y : 0.7 vpp ...

  • Page 54

    Connections connections 7-10 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 7-10 component input selection : key in the corresponding slot number on the rcu or the local keypad. Indication on the input slot menu : component video-ss = component video with separate sync com...

  • Page 55

    Connections connections 5975288a barcographics 8200lc 150597 7-11 7-11 5975288a barcographics 8200lc 150597 rgb3s/rg3sb input module. Connect your rgb signals with tri-level sync, e.G. A professional vcr to the rgb 3 level sync input module. Rgb3s/rg3sb analog : 5 x bnc red :0.7 vpp ± 3 db blue : 0....

  • Page 56

    Connections connections 7-12 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 7-12 straps on module level : floating or non-floating input. Red : j3 : strap "yes" : non floating strap "no" : floating green : j4 : strap "yes" : non floating strap "no" : floating blue : j5 : s...

  • Page 57

    Connections connections 5975288a barcographics 8200lc 150597 7-13 7-13 5975288a barcographics 8200lc 150597 connecting a computer, e.G. Ibm pc (or compatible), apple macintosh to the rs 232 input of the projector. Rs232 connection r g r g 100 - 230 v 9 - 4 a 60 - 50 h z rs232 out 0 i this device co ...

  • Page 58

    Connections connections 7-14 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 7-14 connecting a rcvds 05 to the projector. - up to 10 or 20 inputs(video) with the rcvds 05 and 90 inputs when rcvds's are linked via the expansion module. - serial communication with the project...

  • Page 59

    Controlling controlling 5975288a barcographics 8200lc 150597 8-1 8-1 5975288a barcographics 8200lc 150597 controlling how to use the rcu. Projector address how to display a projector address. How to program an address into the rcu. Picture controls with direct access. Controlling how to use the rcu....

  • Page 60

    Controlling 8-2 controlling 8-2 5975288 barcographics 8200 110497 5975288a barcographics 8200lc 150597 the barcographics 8200lc can be controlled with a. The rcu b. The hardwired rcu (cable is not included) c. The local keypad. Controlling the projector with the rcu and the hardwired rcu is equal. H...

  • Page 61

    Controlling controlling 5975288a barcographics 8200lc 150597 8-3 8-3 5975288a barcographics 8200lc 150597 c) point the front of the rcu directly at one of the ir sensors of the projector. 0 9 7 8 6 5 4 3 2 1 rcu ceiling front of projector ir sensor 0 9 7 8 6 5 4 3 2 1 rcu rear of projector ir sensor...

  • Page 62

    Controlling 8-4 controlling 8-4 5975288 barcographics 8200 110497 5975288a barcographics 8200lc 150597 how to display a projector address? Press the address key (recessed key on the rcu) with a pencil. The projector's address will be displayed in a 'text box'. This text box disappears after a few se...

  • Page 63

    Controlling controlling 5975288a barcographics 8200lc 150597 8-5 8-5 5975288a barcographics 8200lc 150597 contrast control a correct 'contrast' setting is important for good image reproduction. Adjust the contrast to the level you prefer, according to room lighting conditions. Use the + button for a...

  • Page 64

    Controlling 8-6 controlling 8-6 5975288 barcographics 8200 110497 5975288a barcographics 8200lc 150597.

  • Page 65

    Start up of the adjustment mode 9-1 start up of the adjustment mode 9-1 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 start up of the adjustment mode start up of the adjustment mode.

  • Page 66

    Start up of the adjustment mode 9-2 start up of the adjustment mode 9-2 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 adjustment mode all source set ups, picture tunings and geometry are made while in the 'adjustment mode' . Press the adjust or enter key to enter the 'adjustmen...

  • Page 67

    Start up of the adjustment mode 9-3 start up of the adjustment mode 9-3 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497 some items in the adjustment mode are password protected. While selecting such an item, the projector asks to enter your password (password protection is only a...

  • Page 68

    Start up of the adjustment mode 9-4 start up of the adjustment mode 9-4 5975288 barcographics 8200 110497 5975288 barcographics 8200 110497.

  • Page 69

    Guided adjustment mode 5975288a barcographics 8200lc 150597 10-1 guided adjustment mode 5975288a barcographics 8200lc 150597 10-1 guided adjustment mode guided adjustment mode.

  • Page 70

    Guided adjustment mode 10-2 5975288a barcographics 8200lc 150597 guided adjustment mode 10-2 5975288a barcographics 8200lc 150597 select with or then to return. Adjustment mode select a path from below : guided random access installation service source 01 the guided adjustment mode is not active. Th...

  • Page 71

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-1 random access adjustment mode 11-1 5975288a barcographics 8200lc 150597 random access adjustment mode file service picture tuning geometry random access adjustment mode file service picture tuning geometry.

  • Page 72

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-2 11-2 starting up the random access adjustment mode push the control disk up or down to highlight 'random access' and then press enter . Adjustment mode select a ...

  • Page 73

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-3 random access adjustment mode 11-3 5975288a barcographics 8200lc 150597 file service before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used s...

  • Page 74

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-4 11-4 load file push the control disk up or down to select load and press enter to display the load menu. The load menu displays the corresponding files depending...

  • Page 75

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-5 random access adjustment mode 11-5 5975288a barcographics 8200lc 150597 edit file the edit file menu makes it possible to change the settings of the file according to the actual settings of the connected source. Consult the sour...

  • Page 76

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-6 11-6 up or down to scroll to desired digit. When finished press enter to confirm. C. Counting up or down by pushing the control disk to the right or to the left....

  • Page 77

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-7 random access adjustment mode 11-7 5975288a barcographics 8200lc 150597 options source number : the source number of a non-active source can be changed to any other source number. This makes it possible to create a file for futu...

  • Page 78

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-8 11-8 vertical refresh [sync/async] : the way of updating the image information on the lcd panels. * for sources with a vertical frequency up to 60 hz : the verti...

  • Page 79

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-9 random access adjustment mode 11-9 5975288a barcographics 8200lc 150597 rename to change the name of a selected file. Use the control disk to select rename and press enter . The rename selection menu will be displayed. Select wi...

  • Page 80

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-10 11-10 copy to copy a selected file into a new file. Use the control disk to select copy and press enter . The copy selection menu will be displayed. Use the con...

  • Page 81

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-11 random access adjustment mode 11-11 5975288a barcographics 8200lc 150597 delete to delete a selected file out of the list of files. Use the control disk to select delete and press enter . The delete selection menu will be displ...

  • Page 82

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-12 11-12 file options use the control disk to select options and press enter . The option selection menu will be displayed. Select with or then to return. File ser...

  • Page 83

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-13 random access adjustment mode 11-13 5975288a barcographics 8200lc 150597 sync slow/fast highlight sync by pushing the control disk up or down and press enter to toggle between slow and fast. Note : sync is normally used in the ...

  • Page 84

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-14 11-14 color balance highlight color balance by pushing the control disk up or down and press enter to select the color balance selection menu. The next choices ...

  • Page 85

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-15 random access adjustment mode 11-15 5975288a barcographics 8200lc 150597 gamma with the gamma correction adjustment, it is possible to bring the details in dark image parts more to the front (lower image values) or to reduce th...

  • Page 86

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-16 11-16 geometry highlight geometry by pushing the control disk up or down and press enter to select the geometry selection menu. The following adjustment are pos...

  • Page 87

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-17 random access adjustment mode 11-17 5975288a barcographics 8200lc 150597 size highlight size by pushing the control disk up or down and press enter to select. Select with or then to return. Geometry shift size side keystone bla...

  • Page 88

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-18 11-18 side keystone highlight side keystone by pushing the control disk up or down and press enter to select. The side keystone adjustment is used to align the ...

  • Page 89

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-19 random access adjustment mode 11-19 5975288a barcographics 8200lc 150597 blanking highlight blanking by pushing the control disk up or down and press enter to select. Select with or then to return. Geometry shift size side keys...

  • Page 90

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-20 11-20 blanking top bottom left right select with or then to return. Adjustment of the blanking on the of the image adjustment of the blanking on the bottom of t...

  • Page 91

    Random access adjustment mode 5975288a barcographics 8200lc 150597 11-21 random access adjustment mode 11-21 5975288a barcographics 8200lc 150597 options highlight options by pushing the control disk up or down and press enter. The geometry options menu will be displayed. The next question will be a...

  • Page 92

    Random access adjustment mode 5975288a barcographics 8200lc 150597 random access adjustment mode 5975288a barcographics 8200lc 150597 11-22 11-22.

  • Page 93

    Installation 12-1 installation 5975288a barcographics 8200lc 150597 12-1 5975288a barcographics 8200lc 150597 installation convergence configuration internal patterns installation convergence configuration internal patterns.

  • Page 94

    Installation 12-2 installation 12-2 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 starting up the installation mode push the control disk up or down to highlight installation and then press enter . Select with or then to return. Adjustment mode select a path from below : ...

  • Page 95

    Installation 12-3 installation 5975288a barcographics 8200lc 150597 12-3 5975288a barcographics 8200lc 150597 input slots highlight input slots by pushing the control disk up or down and press enter . The internal system will scan the input slots and displays the result in the input slots menu. Sour...

  • Page 96

    Installation 12-4 installation 12-4 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 convergence highlight "convergence" by pushing the control disk up or down and press enter to display the convergence selection menu. Every lcd panel has 6 adjustment screws. By turning thes...

  • Page 97

    Installation 12-5 installation 5975288a barcographics 8200lc 150597 12-5 5975288a barcographics 8200lc 150597 to adjust the convergence, there are test patterns provided in the convergence menu. Use the control disk to hightlight convergence and press enter to display the convergence menu. Start wit...

  • Page 98

    Installation 12-6 installation 12-6 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 the three alignments influence each other, therefore repeat if neces- sary the above three steps (b,c and d). When the green pattern is correctly focused, press exit to return to the converg...

  • Page 99

    Installation 12-7 installation 5975288a barcographics 8200lc 150597 12-7 5975288a barcographics 8200lc 150597 if both lines are correctly converged, continue with screw 4. Adjust screw 4 until line 4 is correctly converged. It is possible that line 2 and 3 have to be reconverged. If so, repeat proce...

  • Page 100

    Installation 12-8 installation 12-8 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597 blue on green convergence. Use the control disk to highlight blue on green and press enter to display the blue on green test pattern. Repeat the same procedure as for red on green lines but ...

  • Page 101

    Installation 12-9 installation 5975288a barcographics 8200lc 150597 12-9 5975288a barcographics 8200lc 150597 configuration highlight "configuration" by pushing the control disk up or down and press enter to select. For more information, see projector configuration in chapter installa- tion set up. ...

  • Page 102

    Installation 12-10 installation 12-10 5975288a barcographics 8200lc 150597 5975288a barcographics 8200lc 150597.

  • Page 103

    Service mode 5975288a barcographics 8200lc 150597 1 3 - 1 service mode 5975288a barcographics 8200lc 150597 1 3 - 1 service mode identification change password change language change projector address change baudrate pc reset lamp run time lamp run time history panel adjustments preset color balance...

  • Page 104

    Service mode 1 3 - 2 5975288a barcographics 8200lc 150597 service mode 1 3 - 2 5975288a barcographics 8200lc 150597 starting up the service mode push the control disk up or down to highlight service and then press enter . Some items in the service mode are password protected (when the password funct...

  • Page 105

    Service mode 5975288a barcographics 8200lc 150597 1 3 - 3 service mode 5975288a barcographics 8200lc 150597 1 3 - 3 service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history more... Select with or then to return. Service pa...

  • Page 106

    Service mode 1 3 - 4 5975288a barcographics 8200lc 150597 service mode 1 3 - 4 5975288a barcographics 8200lc 150597 service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history more... Select with or then to return. Service pa...

  • Page 107

    Service mode 5975288a barcographics 8200lc 150597 1 3 - 5 service mode 5975288a barcographics 8200lc 150597 1 3 - 5 select with or then to return. Service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history more... Identifica...

  • Page 108

    Service mode 1 3 - 6 5975288a barcographics 8200lc 150597 service mode 1 3 - 6 5975288a barcographics 8200lc 150597 - baud rate : transfer speed for communication with a ibm pc (or compatible) or mac. The baud rate of the projector must be the same as the baud rate of the connected computer. When th...

  • Page 109

    Service mode 5975288a barcographics 8200lc 150597 1 3 - 7 service mode 5975288a barcographics 8200lc 150597 1 3 - 7 r b v r b v 100 - 230 v 9 - 4 a 60 - 50 hz rs232 out 0 i this device complies with part 15 of the fcc rules. Operation is subject to following two conditions : (1) this device may not ...

  • Page 110

    Service mode 1 3 - 8 5975288a barcographics 8200lc 150597 service mode 1 3 - 8 5975288a barcographics 8200lc 150597 when the strap is on leg 2-3 or no strap is mounted, the password function is enabled, when the strap is on leg 1-2, the password function is disabled. Password enabled strap on leg 2-...

  • Page 111

    Service mode 5975288a barcographics 8200lc 150597 1 3 - 9 service mode 5975288a barcographics 8200lc 150597 1 3 - 9 how to change the password ? Highlight change password by pushing the control disk up or down and press enter to display the change password menu. Select with or then to return. Servic...

  • Page 112

    Service mode 13-10 5975288a barcographics 8200lc 150597 service mode 13-10 5975288a barcographics 8200lc 150597 change projector address every projector requires an individual address between 0 and 255. This address can be software installed. To change that address, push the control disk up or down ...

  • Page 113

    Service mode 5975288a barcographics 8200lc 150597 13-11 service mode 5975288a barcographics 8200lc 150597 13-11 the following baud rates are available : - 9600 - 4800 - 2400 - 1200 - 600 - 300 - 150 - 75 the actual baud rate will be highlighted. To change the baud rate, push the control disk up or d...

  • Page 114

    Service mode 13-12 5975288a barcographics 8200lc 150597 service mode 13-12 5975288a barcographics 8200lc 150597 lamp run time history to get an overview of the different lamp run times, highlight lamp run time history by pushing the control disk up or down and press enter . A listing with the lamp s...

  • Page 115

    Service mode 5975288a barcographics 8200lc 150597 13-13 service mode 5975288a barcographics 8200lc 150597 13-13 panel adjustments changing these settings may seriously affect the performance of the projector. All panel adjustments are factory adjusted. If not really necessary, do not touch one of th...

  • Page 116

    Service mode 13-14 5975288a barcographics 8200lc 150597 service mode 13-14 5975288a barcographics 8200lc 150597 select with or then to return. Service panel adjustments preset input balance 60hz tracking i2c diagnosis more... Preset input balance white balance select with to return adjust red with o...

  • Page 117

    Service mode 5975288a barcographics 8200lc 150597 13-15 service mode 5975288a barcographics 8200lc 150597 13-15 60 hz tracking 60 hz tracking is used to adjust the 60 hz by sychronious signals highlight 60 hz tracking by pushing the control disk up or down and press enter. When 60 hz tracking is sel...

  • Page 118

    Service mode 13-16 5975288a barcographics 8200lc 150597 service mode 13-16 5975288a barcographics 8200lc 150597 select with or then to return. I2c diagnosis d ca lcd driver sc76013 e2h # # # lcd driver sc76013 e4h # # # lcd driver sc76013 ech # # # lcd driver sc76013 eeh # # # lcd driver tda8444 48h...

  • Page 119

    Optional equipment 5975288a barcographics 8200lc 150597 1 4 - 1 optional equipment 5975288a barcographics 8200lc 150597 1 4 - 1 optional equipment ir remote receiver hardwired rcu rcvds05 vs05 magik interface adapter and communication cables ceiling mount kit cm100 transport handle frame for dual or...

  • Page 120

    Optional equipment 1 4 - 2 5975288a barcographics 8200lc 150597 optional equipment 1 4 - 2 5975288a barcographics 8200lc 150597 ir receiver 800 this infra red receiver unit makes it possible to control the barcographics 8200 from another room. There is a communication line with cable between the ir ...

  • Page 121

    Optional equipment 5975288a barcographics 8200lc 150597 1 4 - 3 optional equipment 5975288a barcographics 8200lc 150597 1 4 - 3 rcvds 05 an optional rcvds 05 source selector makes it possible to connect up to 10 (20 if video) sources to the projector. When rcvds's are linked via the expansion module...

  • Page 122

    Optional equipment 1 4 - 4 5975288a barcographics 8200lc 150597 optional equipment 1 4 - 4 5975288a barcographics 8200lc 150597 magik interface multifuctional analog graphics interface kit. Barco's magik interface allows the user to connect a presentation device such as a projector or a professional...

  • Page 123

    Optional equipment 5975288a barcographics 8200lc 150597 1 4 - 5 optional equipment 5975288a barcographics 8200lc 150597 1 4 - 5 number r9827640; and 30 m (100ft), order number r9827570 b. Din mini8-d9 adapter cable. - to connect a macintosh computer to the barcographics 8200lc. (only if the optional...

  • Page 124

    Optional equipment 1 4 - 6 5975288a barcographics 8200lc 150597 optional equipment 1 4 - 6 5975288a barcographics 8200lc 150597 projector transport handle 0.72 m 1.15 m order number : r9829170 projector frame for dual or triple configurations the frame is designed for use in table as well as ceiling...

  • Page 125

    Optional equipment 5975288a barcographics 8200lc 150597 1 4 - 7 optional equipment 5975288a barcographics 8200lc 150597 1 4 - 7 multifunctional flight case barco's multifunctional flight case is a special designed flight case for temporary installations of a barcographics 8200 projector. Due to the ...

  • Page 126

    Optional equipment 1 4 - 8 5975288a barcographics 8200lc 150597 optional equipment 1 4 - 8 5975288a barcographics 8200lc 150597 mechanical shutter barco's mechanical shutter can be used there where the display has to be totally black when the projector is set in pauze. This can be very useful when t...

  • Page 127

    Appendix a : standard source set up files 5975288 barcographics 8200 110497 a-1 appendix a : standard source set up files 5975288 barcographics 8200 110497 a-1 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz cga 640 x 200 59,924 15,700 14,318 912 640 262 200 ntsc 675 x 240i 29,970 15,...

  • Page 128

    Appendix a : standard source set up files a-2 5975288 barcographics 8200 110497 appendix a : standard source set up files a-2 5975288 barcographics 8200 110497 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz vga75iso 640 x 480 75,000 39,375 31,500 800 640 525 480 mac_2 640 x 480 66,66...

  • Page 129

    Appendix a : standard source set up files 5975288 barcographics 8200 110497 a-3 appendix a : standard source set up files 5975288 barcographics 8200 110497 a-3 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz inter_gr 1184 x 886 67,170 61,796 92,941 1504 1184 920 886 ews_50 280 x 1024 ...

  • Page 130

    Appendix a : standard source set up files a-4 5975288 barcographics 8200 110497 appendix a : standard source set up files a-4 5975288 barcographics 8200 110497 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz pam800 1120 x 375i 89,872 36,443 50,000 1372 1120 406 375 fmto_2 640 x 400 55...

  • Page 131

    Appendix b : battery replacement in the rcu 5975288a barcographics 8200lc 150597 b-1 appendix b : battery replacement in the rcu 5975288a barcographics 8200lc 150597 b-1 battery replacement in the rcu. Remove the battery cover on he backside of the remote control by pushing the indicated handle a li...

  • Page 132

    Appendix b : battery replacement in the rcu b-2 5975288a barcographics 8200lc 150597 appendix b : battery replacement in the rcu b-2 5975288a barcographics 8200lc 150597.

  • Page 133

    Appendix c : focusing the lens 5975288a barcographics 8200lc 150597 c-1 appendix c : focusing the lens 5975288a barcographics 8200lc 150597 c-1 focusing the lens lens holder fastener lens loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to...

  • Page 134

    Appendix c : focusing the lens c-2 5975288a barcographics 8200lc 150597 appendix c : focusing the lens c-2 5975288a barcographics 8200lc 150597.

  • Page 135

    Appendix d : lens cleaning procedure 5975288a barcographics 8200lc 150597 d-1 appendix d : lens cleaning procedure 5975288a barcographics 8200lc 150597 d-1 lens cleaning procedure cleaning procedure for hd(1.5-3:1) lens and hd(3-5.3:1) lens. To minimize the possibility of damaging the optical coatin...

  • Page 136

    Appendix d : lens cleaning procedure d-2 5975288a barcographics 8200lc 150597 appendix d : lens cleaning procedure d-2 5975288a barcographics 8200lc 150597 the lens. Wipe at a speed that is equal to the evaporation rate. This is very important to prevent streaking and spotting. Start your wiping at ...

  • Page 137

    Appendix e : source number 90 - 99 5975288a barcographics 8200lc 150597 e-1 appendix e : source number 90 - 99 5975288a barcographics 8200lc 150597 e-1 source numbers 90 - 99 these source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a rcvds ...

  • Page 138

    Appendix e : source number 90 - 99 e-2 5975288a barcographics 8200lc 150597 appendix e : source number 90 - 99 e-2 5975288a barcographics 8200lc 150597.

  • Page 139

    Appendix f : lenses 5975288a barcographics 8200lc 150597 f-1 appendix f : lenses 5975288a barcographics 8200lc 150597 f-1 lenses this appendix gives an overview of the tables and formulas for the available lenses for the barcographics 8200lc. The next lenses are available : name length lens diam. Le...

  • Page 140

    Appendix f : lenses f-2 5975288a barcographics 8200lc 150597 appendix f : lenses f-2 5975288a barcographics 8200lc 150597 lens formulas to calculate the projector distance. Hd(1.2:1) metric pd=1.264 x sw + 0.126 + (0.018/sw) inch pd= 1.264 x sw + 4.961 + (27.90/sw) hd(2.2:1) metric pd=2.0566 x sw + ...

  • Page 141

    Insert card rcu 5975288a barcographics 8200lc 150597 insert card rcu 5975288a barcographics 8200lc 150597 p rcu input sources 1 projector rcvds 2 3 4 5 6 1 2 3 5 6 7 8 9 10 input sources 7 p rcu input sources 1 projector rcvds 2 3 4 5 6 1 2 3 5 6 7 8 9 10 input sources 7 " p rcu input sources 1 proj...