1. DL manuals
  2. Barco
  3. Projector
  4. R9001560
  5. Owner's Manual

Barco R9001560 Owner's Manual

Summary of R9001560

  • Page 1

    Owner's manual reality 9300 dlc r9001560 r9001569.

  • Page 2

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, september 1999. All rights reserved. Trademarks are the rights of their respective owners. Barco n.V./projection systems noordlaan 5 b-8520 kuurne belgium tel : +32/56/368211 fax : +32...

  • Page 3

    Barco projection systems date : 070999 owner's manual reality 9300 dlc r9001560 r9001569 art. No. : r5976052.

  • Page 4

    I-1 table of contents 5976052 barcoreality 9300 070999 table of contents ............................................................. I-1 unpacking and dimensions ............................................ 1-1 unpacking ....................................................................... 1-1 p...

  • Page 5

    1-1 unpacking and dimensions 5976052 barcoreality 9300 070999 1 1 2 3 4 5 3 7 9 pull to open unpacking and dimensions unpacking to open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the projecto...

  • Page 6

    1-2 unpacking and dimensions 5976052 barcoreality 9300 070999 battery installation in the rcu. Two batteries are packed together with the rcu. Before using your rcu, install first these batteries. 1 remove the battery cover on the backside by pushing the handle a little towards the bottom of the rcu...

  • Page 7

    2-1 installation guidelines 5976052 barcoreality 9300 070999 2 installation guidelines 6fuhhqzlgwk installation guidelines careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. ...

  • Page 8

    2-2 installation guidelines 5976052 barcoreality 9300 070999 b = distance between ceiling and top of the screen or between floor and bottom of the screen. A = correction value, distance between bottom side of projector (without feet) and middle of the lens. Value to be subtracted from b to obtain th...

  • Page 9

    3-1 location and functions of control 5976052 barcoreality 9300 070999 3 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs2 32 o ut ir-acknowledged ir-received diagnostics code ir-receiver 9 $ +] 0 i t h i s d e v i ce c o m p li e s w it h p a...

  • Page 10

    3-2 location and functions of control 5976052 barcoreality 9300 070999 ) ) ) ) ) $'- (;,7 (17(5 3$86( 3+$6( 7(;7 6+$531 7,17 &2/25 %5,*+71 &2175 75(%/( %$/$1&( %$66 92/ color phase sharpn tint brightn standby enter text exit pause &2175$67 b. Remote control this remote control includes a battery pow...

  • Page 11

    3-3 location and functions of control 5976052 barcoreality 9300 070999 13 freez : press to freeze the projected image. 14 text : when adjusting one of the image, e.G. Controls during a meeting, the displayed bar scale can be removed by pressing 'text' key first. To re-display the bar scale on the sc...

  • Page 12

    3-4 location and functions of control 5976052 barcoreality 9300 070999.

  • Page 13

    Installation set up 4-1 5976052 barcoreality 9300 070999 4 )urqw7deoh )urqw&hlolqj 5hdu7deoh 5hdu&hlolqj installation set up configuration the projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. To change the config...

  • Page 14

    Installation set up 4-2 5976052 barcoreality 9300 070999 adjustable lensholder features and principals. With 'adjustable lensholder', it is possible to shift the displayed picture of the projector up or down on the screen, without moving the projector from its normal position, and without any pictur...

  • Page 15

    Installation set up 4-3 5976052 barcoreality 9300 070999 '(&2'(5 9,'(2,1387 9,'(2 69,'(2 r g b v r g b h / c v h 0i for continued protection against risk of fire, replace only with same type and rating of fuse rs 232 in remote ir-receiver f 10 ah / 250 v projector mode : green - operation red - stan...

  • Page 16

    Installation set up 4-4 5976052 barcoreality 9300 070999.

  • Page 17

    5-1 connections 5976052 barcoreality 9300 070999 5 r g b v r g b h / c v on 98 2791 0 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) r s232 out ir-acknowledged ir-received diagnostics code ir-receiver 0 i...

  • Page 18

    5-2 connections 5976052 barcoreality 9300 070999 r g b v r g b h / c v on 98 27 910 r g b h / c v h 9,'(2,1387 9, '(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs 232 o ut ir-acknowledged ir-received d ia gn ostics c ode ir-r eceive...

  • Page 19

    5-3 connections 5976052 barcoreality 9300 070999 select with or then to return. 21 2)) % + * 5 9 ,13 ,13 ,1387 $1$/2*,17(5)$&(0+] r g b v r g b h / c v on 9 8 27 91 0 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-per...

  • Page 20

    5-4 connections 5976052 barcoreality 9300 070999 r g b v r g b h / c v h rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 out ir-acknowledged ir-received diagnostics code fixed 5-input slot (slot 2) slot 2 has 5 bnc input terminals. The fol...

  • Page 21

    5-5 connections 5976052 barcoreality 9300 070999 s-video 98 27 9 0 0 video l r audio 9,'(269,'(2,1387 on on t v tu n er, e .G . T v d m 40 ste re o v c r a ud io a m p lifie r c om po site v ide o vcr s-vhs luma/chroma r g b v r g b h / c v on 98 27 910 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232...

  • Page 22

    5-6 connections 5976052 barcoreality 9300 070999 r g b h / c v on 5*%$1$/2*,1387 98 2791 0 )ordwlqjruqrqiordwlqjlqsxw floating non-floating -6\qfvhohfwlrq 6hsdudwhv\qf 6\qfrqjuhhq - - - - - 21 2)) % + * 5 9 ,13 ,13 ,1387 $1$/2*,17(5)$&(0+] r g b v r g b h / c v on 9 8 27 91 0 r g b h / c v h 9,'(2,1...

  • Page 23

    5-7 connections 5976052 barcoreality 9300 070999 select with or then to return. Select with or then to return. Hdtv vcr r g b v r g b h / c v on 98 279 10 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) r ...

  • Page 24

    5-8 connections 5976052 barcoreality 9300 070999 r g b h / c v on 5*%/(9(/6 9 8 2 7920 hdtv vcr r g b v r g b h / c v on 98 279 10 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) r s232 o u t ir-acknowledg...

  • Page 25

    5-9 connections 5976052 barcoreality 9300 070999 d ig it a l v id e o s o u r c e d ig ita l v id e o r g b v r g b h / c v on 98 27 910 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 out ir-acknowl...

  • Page 26

    5-10 connections 5976052 barcoreality 9300 070999 screen communication cable projector ir remote receiver 800 projection room control room 56 frqqhfwlrq r g b v r g b h / c v on 98 27 9 1 0 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby comm...

  • Page 27

    6-1 controlling 5976052 barcoreality 9300 070999 6 ceiling screen ir sensor rcu r g b v r g b h / c v on 98 279 10 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs23 2 out ir-acknowledged ir-received dia...

  • Page 28

    6-2 controlling 5976052 barcoreality 9300 070999 ) ) ) ) ) $ '- (;,7 (17(5 3$ 86( 3+$ 6( 7( ;7 6+$5 31 7,1 7 &2/2 5 %5,*+ 71 &217 5 75( %/( %$/$1& ( % $66 92/ ) ) ) ) ) $'- (;,7 (17(5 3$ 86 ( 3+$6( 7( ;7 6+$531 7,17 &2/25 %5,*+71 &2175 75(%/ ( % $/$1&( %$6 6 92/ r g b v r g b h / c v on 98 27 91 0 r...

  • Page 29

    6-3 controlling 5976052 barcoreality 9300 070999 0 127 how to display a projector address? Press the address key (recessed key on the rcu) with a pencil. The projector's address will be displayed in a 'text box'. This text box disappears after a few seconds. To continue using the rcu with that speci...

  • Page 30

    7-1 start up of the adjustment mode 5976052 barcoreality 9300 070999 7 start up of the adjustment mode adjustment mode all source parameters, picture tuning and geometry are made while in the 'adjustment mode' . Press the adjust or enter key to enter the 'adjustment mode'. You are now in the 'adjust...

  • Page 31

    8-1 random access adjustment mode 5976052 barcoreality 9300 070999 8 random access adjustment mode adjustment mode select a path from below : random access installation service source 01 select with or then to return. Starting up the random access adjustment mode push the control disc up or down to ...

  • Page 32

    8-2 random access adjustment mode 5976052 barcoreality 9300 070999 select with or then to return. Select with or then to return. Select with or then to return. To enter the file service, handle as follow : 1 pushing the cursor key é or ê to highlight 'file service'. 2 press enter to select. The file...

  • Page 33

    8-3 random access adjustment mode 5976052 barcoreality 9300 070999 select with or to toggle or to change value to return edit file options source number 1 clamp position [leading] clamp delay 0 clamp width 10 field polarity [pos] field select [both] vertical refresh [sync] vert. Sync polarity [leadi...

  • Page 34

    8-4 random access adjustment mode 5976052 barcoreality 9300 070999 select with or then to return. Clamp width : the width of the clamp pulse can be any value between 0 and 255. Change the value by pushing the cursor key è or ç. Field polarity : the field polarity function is used for interlaced imag...

  • Page 35

    8-5 random access adjustment mode 5976052 barcoreality 9300 070999 select with or then to return. Select with or then to return. Copy file filename src resolution ----------------------------------------------------- video525.S01 1 675x240i video525.C01 1 675x240i video525.C02 1 675x240i -----------...

  • Page 36

    8-6 random access adjustment mode 5976052 barcoreality 9300 070999 select with or then to return. Select with or then to return. File options 1 push the cursor key é or ê to highlight 'file options'. 2 press enter. The option selection menu will be displayed. File sort press enter to toggle between ...

  • Page 37

    8-7 random access adjustment mode 5976052 barcoreality 9300 070999 0 2.5 3 custom balance allows the user to set his own prefered color temperature. To adjust custom balance, handle as follow : 1 push the cursor key é or ê to highlight 'custom balance'. 2 press enter to select. 3 push the cursor key...

  • Page 38

    8-8 random access adjustment mode 5976052 barcoreality 9300 070999 dynamic color depth increases color contrast for all video and data sources. To change the dynamic color depth value : 1 push the cursor key é or ê to highlight 'dynamic color depth'. 2 press enter to select. 3 change the value by pu...

  • Page 39

    8-9 random access adjustment mode 5976052 barcoreality 9300 070999 select with or then to return. Random access adjustment mode file service picture tuning geometry geometry shift size side keystone blanking options select with or then to return. Geometry to start up the geometry functions : 1 push ...

  • Page 40

    8-10 random access adjustment mode 5976052 barcoreality 9300 070999 select with or then to return. Bottom blanking top blanking right blanking left blanking geometry shift size side keystone blanking options blanking top bottom left right select with or then to return. Side keystone the side keyston...

  • Page 41

    8-11 random access adjustment mode 5976052 barcoreality 9300 070999 adjustment of the blanking on the top of the image adjustment of the blanking on the bottom of the image correct by pushing the control disc up or down adjustment of the blanking on the left side adjustment of the blanking on the ri...

  • Page 42: Installation Mode

    9-1 installation mode 5976052 barcoreality 9300 070999 9 select with or then to return. Select with or then to return. Installation mode starting up the installation mode push the cursor key é or ê to highlight 'installation mode' and then press enter. The following item can be selected in the insta...

  • Page 43

    9-2 installation mode 5976052 barcoreality 9300 070999 select with or then to return. Select with or then to return. 800 peripheral output module selection. When a rcvds05 is connected to the projector, the type of output module of this rcvds05 has to be defined in the 800 peripheral menu. The type ...

  • Page 44

    9-3 installation mode 5976052 barcoreality 9300 070999 convergence green to midposition green blue on green red on green hatch about moca green to midposition are you sure to set the green motorized convergence adjustment to midposition ? This adjustment cannot be undone afterwards ! To continue to ...

  • Page 45

    9-4 installation mode 5976052 barcoreality 9300 070999 red on green convergence 1 highlight 'red on green' by pushing the cursor key é or ê and press enter to display the red on green test pattern. The drawings and digit will be displayed in red. 2 adjust position 1, 2 and 3 to obtain an optimal foc...

  • Page 46

    9-5 installation mode 5976052 barcoreality 9300 070999 select with or then to return. Configuration 1 push the cursor key é or ê to highlight 'configuration'. 2 press enter to select. For more information, see projector configuration in chapter 4 : 'installation set up'. Osd color (on-screen display...

  • Page 47

    Service mode 10-1 5976052 barcoreality 9300 070999 10 select with or then to return. Service mode starting up the service mode push the cursor key é or ê to highlight 'service' and then press enter. Some items in the service mode are password protected (when the password function is active). Enter y...

  • Page 48

    Service mode 10-2 5976052 barcoreality 9300 070999 service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history lamp drive mode more... Select with or then to return. Service barco logo panel adjustments uniformity preset inpu...

  • Page 49

    Service mode 10-3 5976052 barcoreality 9300 070999 r g b v r g b h / c v on 98 27910 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 out ir-acknowledged ir-received diagnostics code ir-receiver 0 i t...

  • Page 50

    Service mode 10-4 5976052 barcoreality 9300 070999 select with or then to return. Select with or then to return. Select with or then to return. Service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history select with or then t...

  • Page 51

    Service mode 10-5 5976052 barcoreality 9300 070999 select with or then to return. Lamp drive mode silent normal boost select with or then to return. Lamp run time history to get an overview of the different lamp run times : 1 push the cursor key é or ê to highlight 'lamp run time history'. 2 press e...

  • Page 52

    Service mode 10-6 5976052 barcoreality 9300 070999 select with or then to return. Select with or then to return. Select with or then to return. I2c diagnosis. Gives an overview of the correct working of the i²c controlled ic's. 1 push the cursor key é or ê to highlight 'i2c diagnosis'. 2 press enter...

  • Page 53

    A-1 appendix a : standard source set up files 5976052 barcoreality 9300 070999 a standard source set up files name : name of file, contains the settings resolution : image resolution, when fol- lowed by ...I means interlaced. Fvert hz : vertical frame frequency of the source fhor khz : horizontal fr...

  • Page 54

    A-2 appendix a : standard source set up files 5976052 barcoreality 9300 070999 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz pam500 640 x 400 60,000 26,400 22,810 864 640 440 400 pam800 1120 x 375i 44,936 36,443 50,000 1372 1120 406 375 pc98_1 640 x 400 56,416 24,823 21,050 848 640 ...

  • Page 55

    B-1 lenses 5976052 barcoreality 9300 070999 b loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : do not turn out the lens too far, otherwise it will fall out of the lens holder. When the image is focused...

  • Page 56

    B-2 lenses 5976052 barcoreality 9300 070999 lenses e m a n s n e l h t g n e l ) h c n i ( m m s n e l . M a i d ) h c n i ( m m t h g i e w ) s b l ( g k r e b m u n r e d r o ) 1 : 2 . 1 ( d h q ) 6 9 . 9 ( 3 5 2 ) 4 4 . 7 ( 9 8 1 ) 2 . 9 1 ( 7 . 8 0 6 7 9 2 8 9 r ) 1 : 2 . 2 ( d h ) 5 2 . 9 ( 5 3...

  • Page 57

    C-1 source numbers 80 - 89 and 90 - 99 5976052 barcoreality 9300 070999 c source numbers 80 - 89 and 90 - 99 projector without any 800 peripheral connected. The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source numb...

  • Page 58

    C-2 source numbers 80 - 89 and 90 - 99 5976052 barcoreality 9300 070999 source numbers 81 - 85 only valid if no input module is connected to slot 81 - 85 of a rcvds05. The source numbers 81 - 85 correspond to the physical inputs 1 - 5 of the projector. E.G. When slot 1 of the projector has to be sel...

  • Page 59

    5976052 barcoreality 9300 070999 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6.