1. DL manuals
  2. Barco
  3. Projector
  4. R9001890
  5. Owner's Manual

Barco R9001890 Owner's Manual

Manual is about: projection system

Summary of R9001890

  • Page 1

    Barco projection systems date: 12.06.2001 owner's manual rev.: 03 r9001890 r9001899 art. No.: r5976229 slm g5 performer.

  • Page 2

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, june 2001. All rights reserved. Trademarks are the rights of their respective owners. Barco n.V./projection systems noordlaan 5 b-8520 kuurne belgium tel : +32/56/368211 fax : +32/56/3...

  • Page 3: Table of Contents

    I-1 table of contents 5976229 barcoslm g5 10052001 i table of contents table of contents ......................................................................................................I-1 safety instruction related to slm projectors ......................................... 1-1 warnings ........

  • Page 4

    I-2 table of contents 5976229 barcoslm g5 10052001 connections ................................................................................................................ 4-1 power connection to projector .............................................................................................

  • Page 5

    I-3 table of contents 5976229 barcoslm g5 10052001 entering the password ..................................................................................................................................................................... 6-1 remark .....................................................

  • Page 6

    I-4 table of contents 5976229 barcoslm g5 10052001 shift ........................................................................................................................................................... 7-13 to start up the shift action : ......................................................

  • Page 7

    I-5 table of contents 5976229 barcoslm g5 10052001 lamp........................................................................................................................................................... 9-7 lamp information light output switching. ...............................................

  • Page 8

    I-6 table of contents 5976229 barcoslm g5 10052001.

  • Page 9: Projectors

    1-1 safety 5976229 barcoslm g5 26042001 1 safety instruction related to slm projectors warnings to prevent personel injury the customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to barco. To prevent injuries and physical damage, a...

  • Page 10

    1-2 safety 5976229 barcoslm g5 26042001 note definitions definition qualified service technicians or qualified technicians : persons having appropiate technical training and experience necessary to be aware of hazards to which they are exposed in performing a task and of measures to minimize the dan...

  • Page 11: Packaging And Dimensions

    2-1 packaging and dimensions 5976229 barcoslm g5 05012001 2 1 2 3 4 5 3 7 9 pull to open packaging and dimensions projector packaging way of packaging the projector can be packed in two different ways : - in a flightcase or - in carton. Flightcase the projector is packed in a flightcase. Carton to p...

  • Page 12

    2-2 packaging and dimensions 5976229 barcoslm g5 05012001 lens packaging way of packaging lenses are supplied as an individual item. They are packed in a carton. Projector case dimensions the dimensions are given in mm 25.4 mm = 1" $,5,1 $,5287 ,5 uhfhlyhu )52179,(:.

  • Page 13

    2-3 packaging and dimensions 5976229 barcoslm g5 05012001.

  • Page 14

    2-4 packaging and dimensions 5976229 barcoslm g5 05012001.

  • Page 15: Installation Guidelines

    3-1 installation guidelines 5976229 barco slm g5 12062001 3 installation guidelines installation guidelines ambient temperature conditions careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the pro...

  • Page 16

    3-2 installation guidelines 5976229 barco slm g5 12062001 regardless of the type of screen used, it is important that your screen is of sufficient height to display the images at the aspect ratio intended to be used. If you have insufficient height, you will have to reduce the overall image size in ...

  • Page 17

    3-3 installation guidelines 5976229 barco slm g5 12062001 6fuhhq 3' % )orru 3urmhfwru &' 6+ 2swlfdod[lvsurmhfwlrqohqv 6+ 6: 6,'(9,(: %$&.9,(: 6fuhhq 7239,(: 6: )orru 7deoh7rsvlghidflqjfhlolqj $ &' 6+%$ 6fuhhq 3' % &hlolqj 3urmhfwru &' 6+ 2swlfdod[lvsurmhfwlrqohqv 6+ 6: 6,'(9,(: %$&.9,(: 6fuhhq &(,/,...

  • Page 18

    3-4 installation guidelines 5976229 barco slm g5 12062001 image 7 re-adjusting the lamp position in the lamp casing with higher run times, the light output of the lamp will decrease, which results in a lower light output on the screen. This light output decrease can be compensated by readjusting the...

  • Page 19

    3-5 installation guidelines 5976229 barco slm g5 12062001 lenses which lens has to be selected. 1 determine the required screen width. 2 determine the approximate position of the projector in the projection room with regard to the screen and measure the projector-screen distance (pd). 3 use the lens...

  • Page 20

    3-6 installation guidelines 5976229 barco slm g5 12062001 installing the projection lens the projector is supplied without any lens. Installation of tld lenses : remove the foam rubber in the opening of the lens holder. 1 take the lens assembly out of its packing material and remove the lens caps on...

  • Page 21

    3-7 installation guidelines 5976229 barco slm g5 12062001 cleaning the lens to minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have developed recommendations for cleaning the lens. First, we recommend you try to remove any material from the lens by blo...

  • Page 22

    3-8 installation guidelines 5976229 barco slm g5 12062001 stacking projectors up to 3 projectors can be stacked on each other without using extra tools or accessories. Handle as follow : 1 put the second projector on the first one so that base plate of the second projector matches with the rigging s...

  • Page 23

    3-9 installation guidelines 5976229 barco slm g5 12062001 rigging points and accessories. Clamps slots are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this position matches with the rigging points. Consult a professional struct...

  • Page 24

    3-10 installation guidelines 5976229 barco slm g5 12062001 how to mount the clamps ? To fix the clamps to the u-profile, follow the next procedure : 1. Measure the distance, center tube as reference, between the two used support bars of a truss. 2. Slide the clamps holders (2 per profile) on its pla...

  • Page 25: Connections

    4-1 connections 5976229 barcoslm g5 15032001 4 ( 17(5 d 3$86( 3+$6( )5((= 7( ;7 (;,7 $'- 67% 6+$531 (66 7,17 &2/25 %5,* +71(66 &2175$67 +( /3 " &2/25 3+$6( 6+$531 7,17 %5,*+71 67$1'% (17(5 7(;7 (;,7 3$86( &2175$67 $ fuses warning for continued protection against fire hazard : - refer replacement to ...

  • Page 26

    4-2 connections 5976229 barcoslm g5 15032001 lamp run time is 1500 hours. Operating the lamp longer than 1500 hours may damage the projector. Please replace the lamp. When ok (enter) is pressed to go on, the warning will be repeated every 30 min. The total lifetime of the lamp for a safe operation i...

  • Page 27

    4-3 connections 5976229 barcoslm g5 15032001 fixed inputs 1 & 2 5 cable input or dvi inputs variable inputs 3 & 4 2 digital inputs choice out of : sdi input order no. : r9840110 hd sdi digital input order no. : r9840450 input facilities, rcvds05 or vs05 connected. Note : when using a rcvds05 or vs05...

  • Page 28

    4-4 connections 5976229 barcoslm g5 15032001 input module insertion into the projector to insert a module in one of the free slots, handle as follow : 1 power down the projector and disconnect the power cord from the wall outlet. 2 remove the dummy plate covering the chosen input slot by turning out...

  • Page 29

    4-5 connections 5976229 barcoslm g5 15032001 fixed slot (slot 1 & 2) slot 1 & 2 has 5 bnc input terminals for 5 cable input and a dvi plug for dvi input. Slot 1 has also an dvi output for loop through to a second projector. Within the installation mode it is possible to setup the input for 5 cable o...

  • Page 30

    4-6 connections 5976229 barcoslm g5 15032001 how to change the input slot setting 1 press adjust or enter key to start up the adjustment mode. 2 push the cursor key é or ê to select installation (menu 1) 3 press enter. 4 press the cursor key é or ê to select 'input slots' (menu 2) 5 press enter. The...

  • Page 31

    4-7 connections 5976229 barcoslm g5 15032001 connections : one bnc input terminal and one active loop-through bnc output terminal. The input is always 75 ohm terminated. The output inpedance of the sdi out is 75 ohm. How to select the digital input : key in the corresponding slot number on the rcu o...

  • Page 32

    4-8 connections 5976229 barcoslm g5 15032001 hd sdi digital input (slot 3 & 4) what can be connected to this input ? This input is full compatible with hd digital sources. This avoids the need for analog video processing anywhere in the video production chain and guarantees the ultimate image qualit...

  • Page 33

    4-9 connections 5976229 barcoslm g5 15032001 communication connections available communication connections : rs232/422 connection between projector and computer. Communication port for communication with barco peripherals. Trigger output rs232 connections rs 232/422 input and rs232/422 output of the...

  • Page 34

    4-10 connections 5976229 barcoslm g5 15032001.

  • Page 35: Getting Started

    5-1 getting started 5976229 barcoslm g5 08022001 5 getting started remote control & local keypad functionality this remote control includes a battery powered infrared (ir) transmitter that allows the user to control the projector remotely. This remote control and local keypad is used for source sele...

  • Page 36

    5-2 getting started 5976229 barcoslm g5 08022001 terminology 1 barco key : = selection key, to get direct access to the lens adjustment menus. 2 adj. : adjust key, to enter or exit the adjustment mode. 3 address key (recessed key), to enter the address of the projector (between 0 and 9). Press the r...

  • Page 37

    5-3 getting started 5976229 barcoslm g5 08022001 ( 17(5 d 3$86( 3+$6( )5((= 7( ;7 (;,7 $'- 67% 6+$531 (66 7,17 &2/25 %5,* +71(66 &2175$67 +( /3 " &2/25 3+$6( 6+$531 7,17 %5,*+71 67$1'% (17(5 7(;7 (;,7 3$86( &2175$67 $ operating the projector switching on use the power switch to switch on. When '0' i...

  • Page 38

    5-4 getting started 5976229 barcoslm g5 08022001 select with é or ê then to return. Adjustment mode select a path from below : random access installation service select with é or ê then to return. Service identification change password change language change proj. Address serial communication lamp m...

  • Page 39

    5-5 getting started 5976229 barcoslm g5 08022001 lens adjustment zoom/focus zoom with éor ê focus with çor è to shift to return lens adjustment shift shift with éor ê, çor è to zoom/focus to return quick lens adjustment for a quick lens set up and image shift, press the barco key, to display inmedia...

  • Page 40

    5-6 getting started 5976229 barcoslm g5 08022001 using the rcu pointing to the reflective screen point the front of the rcu to the reflective screen surface. Quick on screen color change for quick change of the the on-screen color of the highlighted items. The highlighted items on the menus can be d...

  • Page 41

    5-7 getting started 5976229 barcoslm g5 08022001 hardwired remote input rcu used in a hardwired configuration. Plug one end of the remote cable in the connector on the bottom of the rcu and the second side in the connector on the input panel of the projector labelled 'hardwired ctrl1'. Hardwired to ...

  • Page 42

    5-8 getting started 5976229 barcoslm g5 08022001 projector address why a projector address ? As more than one projector can be installed in a room, the separate projectors should be separately addressable with an rcu or computer. There for each projector has its own address. Set up an individual pro...

  • Page 43

    5-9 getting started 5976229 barcoslm g5 08022001 projector address 001 to continue using the rcu with that specific address, it is necessary to enter the same address with the digit buttons (address between 0 and 9) within 5 seconds after pushing the address key. For example : if the address key dis...

  • Page 44

    5-10 getting started 5976229 barcoslm g5 08022001 phase control use the control + and - button to adjust the phase of the displayed image to climate pixel jitter on computer generated images. Note : this contol has no effect on video images. The pause key. When the pause key is pressed, the image pr...

  • Page 45

    6-1 start up of the adjustment mode 5976229 barcoslm g5 05012001 6 start up of the adjustment mode adjustment mode start up all source parameters, picture tuning and geometry are made while in the 'adjustment mode'. Press the adjust or enter key to enter the 'adjustment mode'. You are now in the 'ad...

  • Page 46

    6-2 start up of the adjustment mode 5976229 barcoslm g5 05012001 error invalid password to return when the password is correct, you gain access to the selected item. When the password is wrong. The error message "invalid password" is displayed on the screen. Press exit to continue and to return to t...

  • Page 47

    7-1 random access adjustment mode 5976229 barcoelm g5 12062001 7 random access adjustment mode random access mode starting up push the control disc up or down to highlight 'random access' and then press enter. Adjustment mode select a path from below : random access installation service source 01 se...

  • Page 48

    7-2 random access adjustment mode 5976229 barcoelm g5 12062001 picture service connecting a new source. Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of t...

  • Page 49

    7-3 random access adjustment mode 5976229 barcoelm g5 12062001 select with é or ê then to return. Load file start up the load file. 1 push the cursor key é or ê to highlight 'load' (menu 1). 2 press enter to select. The load menu displays the corresponding files depending on the installed filter (me...

  • Page 50

    7-4 random access adjustment mode 5976229 barcoelm g5 12062001 edit file what can be done with the edit file menu ? The edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the dat...

  • Page 51

    7-5 random access adjustment mode 5976229 barcoelm g5 12062001 select with é or ê to toggle ç or è to change value to return edit file options source number 1 clamp position [trailing] clamp delay 0 clamp width 10 field polarity [pos] field select [both] vertical refresh [sync] 6\qf sxovh &odps sxov...

  • Page 52

    7-6 random access adjustment mode 5976229 barcoelm g5 12062001 field polarity : the field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double lines are visible in the image). This can be corrected by forcing the field polarity to [neg] o...

  • Page 53

    7-7 random access adjustment mode 5976229 barcoelm g5 12062001 select with é or ê then to return. How to change the characters ? 1 push the cursor key ç or è to select the desired character (menu 4). 2 change that character by pushing the cursor key é or ê. Numeric characters can be entered directly...

  • Page 54

    7-8 random access adjustment mode 5976229 barcoelm g5 12062001 select with é or ê then to return. File service load edit rename copy delete options delete file filename src resolution ----------------------------------------------------- video525.S01 1 675x240i video525.C01 1 675x240i video525.C02 1...

  • Page 55

    7-9 random access adjustment mode 5976229 barcoelm g5 12062001 picture tuning cti [on] color temperature gamma decoding [ebu] dynamic color depth noise reduction input balance select with é or ê then to return. Picture tuning start up to improve the image quality, the item in the picture tuning menu...

  • Page 56

    7-10 random access adjustment mode 5976229 barcoelm g5 12062001 color temperature projector white computer 9300k video 6500k film 5400k broadcast 3200k custom balance select with é or ê then to return. Picture tuning cti [on] color temparature gamma decoding [ebu] dynamic color depth noise reduction...

  • Page 57

    7-11 random access adjustment mode 5976229 barcoelm g5 12062001 3 picture tuning cti [on] color temperature gamma decoding [ebu] dynamic color depth noise reduction input balance gamma = 2.2 how to change the gamma value ? To change the gamma value : 1 push the cursor key é or ê to highlight 'gamma'...

  • Page 58

    7-12 random access adjustment mode 5976229 barcoelm g5 12062001 select with é or ê then to return. Picture tuning cti [on] color temperature gamma decoding [ebu] dynamic color depth noise reduction input balance adjust red with é or ê blue with ç or è noise reduction purpose : reduces noise and pixe...

  • Page 59

    7-13 random access adjustment mode 5976229 barcoelm g5 12062001 select with é or ê then to return. Random access adjustment mode file service picture tuning geometry geometry shift size blanking aspect ratio [4:3] select with é or ê then to return. How to adjust the input balance for yuv input signa...

  • Page 60

    7-14 random access adjustment mode 5976229 barcoelm g5 12062001 geometry shift size blanking aspect ratio [4:3] shift what can be done ? The image can be shifted in a horizontal or vertical direction. To start up the shift action : 1 push the cursor key é or ê to highlight 'shift'. 2 press enter to ...

  • Page 61

    7-15 random access adjustment mode 5976229 barcoelm g5 12062001 %rwwrpeodqnlqj 7rseodqnlqj 5ljkweodqnlqj /hiweodqnlqj blanking what can be done ? Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwa...

  • Page 62

    7-16 random access adjustment mode 5976229 barcoelm g5 12062001 aspect ratio what can be done? The projector can be forced to display a image in a typical aspect ratio. E.G. Projecting a 4:3 image in a 16:9 format. Setting up the aspect ratio. 1 push the cursor key é or ê to highlight 'aspect ratio'...

  • Page 63: Installation Mode

    8-1 installation mode 5976229 barcoslm g5 10052001 8 installation mode installation mode start up push the cursor key é or ê to highlight 'installation mode' and then press enter. Adjustment mode select a path from below : random access installation service source 01 installation input slots 800 per...

  • Page 64

    8-2 installation mode 5976229 barcoslm g5 10052001 select with é or ê to toggle to return. Component video component video - ss : component video with separate sync component video - soy : component video with sync on y component video - 3lss : component video with 3 level separate sync. Component v...

  • Page 65

    8-3 installation mode 5976229 barcoslm g5 10052001 select with é or ê to toggle to return. 800 peripheral menu 2 output module [standard] infrared [ ppm ] defining the infrared communication protocol when a peripheral is connected to the 'comm port', the communication can be in ppm or rc5. The type ...

  • Page 66

    8-4 installation mode 5976229 barcoslm g5 10052001 osd color highlighted item red green yellow select with é or ê then to return. Menu 2 menu 1 select with é or ê then to return. How to change this color setting ? 1 push the cursor key é or ê to highlight 'osd color' (menu 1). 2 press enter to selec...

  • Page 67

    8-5 installation mode 5976229 barcoslm g5 10052001 changing the background color to change the background color handle as follow : 1 push the cursor key é or ê to highlight 'no signal' (menu 1). 2 press enter to select. The 'no signal' menu will be displayed (menu 2). 3 push the cursor key é or ê to...

  • Page 68

    8-6 installation mode 5976229 barcoslm g5 10052001 note : each pattern (except purity) can be inverted by pressing enter. For page char, the next or previous character can be selected by pushing the cursor key é or ê . To return to the normal pattern, press exit. Lens adjustments what can be done ? ...

  • Page 69

    8-7 installation mode 5976229 barcoslm g5 10052001 zoom/focus/shift within the displayed pattern it is possible to adjust the zoom/focus and the shift. Use the enter key to toggle between zoom/focus and shift operation. How to zoom/focus ? 1 push the cursor key é or ê to select zoom/focus (menu 1) 1...

  • Page 70

    8-8 installation mode 5976229 barcoslm g5 10052001 to toggle to return. Menu 2 lens options use the same zoom and focus of the lens for all files ? [no] quick access keys what can be done ? It is possible to get an overview of the programmed functions of the different function keys (only accessible ...

  • Page 71

    8-9 installation mode 5976229 barcoslm g5 10052001 menu position what can be done ? The adjustment menus can be displayed in the corner or in the middle of the image. How to set up? 1 push the cursor key é or ê to highlight 'menu position' (menu 1). 2 press enter to toggle between [default] and [cen...

  • Page 72

    8-10 installation mode 5976229 barcoslm g5 10052001.

  • Page 73: Service Mode

    Service mode 9-1 5976229 barco slm g5 10052001 9 select with é or ê to toggle to return. Lamp constant light output [yes] serial number : r101111 article number : r9840740 run time : 10 hours remaining run time : 1490 hours number of strikes : 10 z-axis : 100 service mode service mode start up push ...

  • Page 74

    Service mode 9-2 5976229 barco slm g5 10052001 service identification change password change language change proj. Address serial communication lamp more... Select with é or ê then to return. Service barco logo add ins preset input balance diagnosis more... Select with é or ê then to return. Barco l...

  • Page 75

    Service mode 9-3 5976229 barco slm g5 10052001 - projector run time: gives the total run time since the first start up. All projectors leave the factory with a run time of approximately 24 hours. - projector serial number : indicates the fabrication number of the projector. This number can be useful...

  • Page 76

    Service mode 9-4 5976229 barco slm g5 10052001 select with é or ê then to return. Service identification change password change language change proj. Address serial communication lamp more... Menu 1 menu 2 how to change the password ? To change the password for all the levels can be done as follow (...

  • Page 77

    Service mode 9-5 5976229 barco slm g5 10052001 select with é or ê then to return. Service identification change password change language change proj. Address serial communication lamp more... Select with é or ê then to return. Change projector address how to change that address ? 1 push the cursor k...

  • Page 78

    Service mode 9-6 5976229 barco slm g5 10052001 setting up the baud rate to change the baud rate, handle as follow : 1 push the cursor key é or ê to highlight 'baudrate' (menu 1). The actual baud rate will be displayed. 2 press enter to toggle between the available baudrates. Default : 9600 select wi...

  • Page 79

    Service mode 9-7 5976229 barco slm g5 10052001 select with é or ê then to return. Select with é or ê to toggle to return. Lamp constant light output [yes] serial number : r101111 article number : r9840740 run time : 10 hours remaining run time : 490 hours number of strikes : 10 z-axis : 100 menu 2 s...

  • Page 80

    Service mode 9-8 5976229 barco slm g5 10052001 available settings. Status [on/off] on : barco logo will be displayed on the screen. Off : no barco logo displayed on the screen. Background [on/off] on : barco logo will be displayed on a black background. Off : barco logo will be displayed without any...

  • Page 81

    Service mode 9-9 5976229 barco slm g5 10052001 select with é or ê then to return. Warning preset input balance is reserved to qualified service personnel to accept to return. Menu 2 select with é or ê then to return. Menu 1 service barco logo add-ins preset input balance diagnosis more... Preset inp...

  • Page 82

    Service mode 9-10 5976229 barco slm g5 10052001 i2c diagnosis d ca decoder 12h # # # motor driver 1ah # # # light sensor 1ch # # # lamp driver 20h # # # power supply 30h # # # formatter 34h # # # pmp 4ah # # # input selector 72h # # # input selector 98h # # # input selector 9ah # # # lamp module a0h...

  • Page 83: Programmable Function Keys

    Programmable function keys 10-1 5976229 barco slm g5 05012001 10 programmable function keys programmable function keys what can be done with these keys the five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu. How can...

  • Page 84

    Programmable function keys 10-2 5976229 barco slm g5 05012001.

  • Page 85

    A-1 appendix a : standard source set up files 5976229 barco slm g5 05012001 a standard source set up files name : name of file, contains the settings resolution : image resolution, when followed by ...I means interlaced. Fvert hz : vertical frame fre- quency of the source fhor khz : horizontal frequ...

  • Page 86

    A-2 appendix a : standard source set up files 5976229 barco slm g5 05012001 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz mac_por 640 x 870 74,996 68,846 57,280 832 640 918 870 muse 1760 x 518i 30,000 33,750 37,125 2047 1760 563 518 video525 1635 x 239i 29,970 15,734 32,207 2047 163...

  • Page 87: Index

    A-1 index 5976229 barcoslm g5 14032001 i index symbols 800 peripheral 8-2 a add-ins 9-8 adjustment mode 6-1 installation mode 8-1 random access mode 7-1 service mode 9-1 start up adjustment mode 6-1 aspect ratio 7-16 b barco logo 9-7 battery battery installation 3-7 blanking 7-15 c change language 9...

  • Page 88

    A-2 index 5976229 barcoslm g5 14032001 lens formulas 3-5 lens packaging 2-2 quick lens adjustment 5-5 m menu position 8-8 n no signal 8-4 noise reduction 7-12 o on screen color 8-3 background color 8-4 quick on screen color change 5-6 p packaging 2-1 carton 2-1 unpack 2-1 way of packaging 2-1 passwo...