1. DL manuals
  2. Barco
  3. Projector
  4. R9002031
  5. Installation Manual

Barco R9002031 Installation Manual

Other manuals for R9002031: Owner's Manual

Summary of R9002031

  • Page 1

    R9002031 r9002038 installation manual data 808s.

  • Page 2

    Barco projection systems date : 170397 art. No. : r5975607 r9002031 r9002038 installation manual data 808s.

  • Page 3

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, march 1997. All rights reserved. Trademarks are the rights of their respective owners. Printed in belgium barco nv/projection systems noordlaan 5 b-8520 kuurne belgium printed in belgi...

  • Page 4

    Table of contents i-1 5975607 barcodata 808s 110397 table of contents ................................................................................................................................ I-1 safety instructions on safety ......................................................................

  • Page 5

    Table of contents i-2 5975607 barcodata 808s 110397 connecting a component video source to port 4/5 ............................................................................. 7-3 connecting a rgb analog source with tri-level sync to port 4/5 (option) ............................................ 7...

  • Page 6

    Safety instructions 1-1 5975607 barcodata 808s 110397 1 safety instructions projectors are built in accordance with the requirements of the international safety standards iec950, ul 1950 and csa c22.2 no. 950, which are the safety standards of information technology equipment including electrical bu...

  • Page 7

    Safety instructions 1-2 5975607 barcodata 808s 110397 unless proper ventilation is provided. On servicing do not attempt to service this projector yourself, as opening or removing covers may expose you to dangerous voltage potential and risk of electric shock! Refer all projector service to a qualif...

  • Page 8

    Unpacking and dimensions 2-1 5975607 barcodata 808s 110397 2 unpacking and projector dimensions unpacking contents of the shipping carton : ρ 1 barcodata 808s projector ρ 1 remote control unit plus 1 battery 9v ρ 1 power cord with outlet plug type cee7 or ansi 73.11 ρ 1 owner's manual ρ 1 installati...

  • Page 9

    Unpacking and dimensions 2-2 5975607 barcodata 808s 110397 projector dimensions (in mm) 1040 a 596 169.5 rotation cover *service* gravity point crt point 36 2 b 28 6 22 6 17 0 84 27 45.5 136 728 960 max 500 fixation point *4 x m8* max 1076 airflow airflow airflow airflow 703 148 m ax 4 2 8 590 front...

  • Page 10

    Installation guidelines 3-1 5975607 barcodata 808s 170397 3 installation guidelines installation guidelines careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to optimize the use of the projection system. Environment do...

  • Page 11

    Installation guidelines 3-2 5975607 barcodata 808s 170397 where to install the projector ? To indicate a correct installation position it is necessary to know : the distance from projector to ceiling in case of ceiling mounted or the distance from projector to floor in case of table mounted; the dis...

  • Page 12

    Installation setup 4-1 5975607 barcodata 808s 170397 4 installation setup removing the top cover during some installations, it will be convenient to remove the top cover from the projector totally. Proceed as follows : pivot the top cover backwards 90° (fully extended); push carefully the top cover ...

  • Page 13

    Installation setup 4-2 5975607 barcodata 808s 170397 scan adaptation the scan switches must be placed in the correct position which corresponds to the desired scanning configuration. To change the scanning, it is necessary to remove the projector top cover and to open the protection plate. For openi...

  • Page 14

    Installation setup 4-3 5975607 barcodata 808s 170397 - press the module lock and lift up the module handle; - repeat this action on both sides of the module and extract the module out of the main frame. Side view top view top view side view push connectors for the vertical deflection module vertical...

  • Page 15

    Installation setup 4-4 5975607 barcodata 808s 170397 to check the current positions of the scan switches, proceed as follows: attention : this procedure can only be done after power (mains) connection. So, first continue with the projector setup and the connections and then return to this procedure....

  • Page 16

    Projector setup 5-1 5975607 barcodata 808s 170397 5 projector setup stdby main power processor cyc block match error rcu rcvds pc pause projector address (sum) off on baud rate table to computer power up mode operating mode when power is switched on on off playing stdby password mode on off yes no r...

  • Page 17

    Projector setup 5-2 5975607 barcodata 808s 170397 1 128 2 64 3 32 4 16 5 8 6 4 7 2 8 1 setting the address is a hardware setup of your projector which must be done during installation. Use the 8 dip switches provided on the controller board labelled 'projector address'. Each dip switch has its own d...

  • Page 18

    Projector setup 5-3 5975607 barcodata 808s 170397 position of dip switches and baud rate codes : baud rate for communication with a computer the communication speed between the projector and the computer has 8 possible settings. With dip switch no. 6, no.7 and no.8 of the 8 dip switches on the contr...

  • Page 19

    Projector setup 5-4 5975607 barcodata 808s 170397.

  • Page 20

    Ac power connection 6-1 5975607 barcodata 808s 170397 6 ac power connection ac power (mains) cord connection use the supplied cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the back of the projector. This projector may be connected to an...

  • Page 21

    Ac power connection 6-2 5975607 barcodata 808s 170397 ac power check check the power voltage which is determined by the art. Nr. (article number) included in the label pasted on the backside of the projector. Projectors with the art. Nr. R9000901 and r9000902 must be connected to a 230 vac power sou...

  • Page 22

    Ac power connection 6-3 5975607 barcodata 808s 170397 switching on the projector push the power (mains) switch located on the rear panel of the projector to switch the projector on and off : if the switch is pressed in : on if the switch is not pressed in : off the projector can be started up in the...

  • Page 23

    Ac power connection 6-4 5975607 barcodata 808s 170397.

  • Page 24

    Source connections 7-1 5975607 barcodata 808s 170397 4/5 component video 8 with tri-level sync r, g and b with composite sync on green; 3 rgb 3 r, g and b with separate composite or with separate horizontal and vertical sync. Port no projector input numeric button description of input signal 1 compo...

  • Page 25

    Source connections 7-2 5975607 barcodata 808s 170397 connecting a s-video (or composite video) source to port 2 separate y-luma/c-chroma signals for higher quality playback of super vhs signals can be connected to port 2 . The composite video can also be connected to this port. To select the s-video...

  • Page 26

    Source connections 7-3 5975607 barcodata 808s 170397 rgb input auto sync tracking module procedure to remove the line termination resistors : turn off the projector and unplug the projector power cord. Remove the top cover from the projector (see p.4-1). Remove the rgb input auto sync tracking modul...

  • Page 27

    Source connections 7-4 5975607 barcodata 808s 170397 connecting a rgb analog source with tri- level sync to port 4/5 (option) rgb analog input terminals with tri-level sync input or with tri-level sync on green can be connected to the projector via port 4/5. The projector detects automatically where...

  • Page 28

    Installation adjustment mode 8-1 5975607 barcodata 808s 120397 8 installation adjustment mode before starting any adjustment. The barcodata 808s is factory optimized for a screen with range 1.9m (74.8 inch) to 3.2m (126.0 inch) you wish an optimal focused image for a screen width between 1.2m to 1.9...

  • Page 29

    Installation adjustment mode 8-2 5975607 barcodata 808s 120397 adaptation procedure : 1. Open and remove the top cover 723&29(5 l e n s e s l e n s n u t 2. Remove the lenses by : - remove for each lens the 4 nuts, holding lens to picture tube support (nutdriver 8 mm). - remove the lens from the bol...

  • Page 30

    Installation adjustment mode 8-3 5975607 barcodata 808s 120397 access to installation adjustment mode it will be necessary to perform several mechanical adjustments while in the installation adjustment mode. It will be required to open and remove the projector's top cover in order to gain access to ...

  • Page 31

    Installation adjustment mode 8-4 5975607 barcodata 808s 120397 optical lens focusing the optical focusing procedure is performed separately for each lens. The appropriate crt will be switched on as the user proceeds through the optical focusing adjustment sequence. Each lens has two focus adjustment...

  • Page 32

    Installation adjustment mode 8-5 5975607 barcodata 808s 120397 raster centering the raster must be centered on the crt faceplate of each tube, therefore, it is necessary to look into the lenses. Caution : to avoid eye discomfort while performing these adjust- ments, reduce the contrast and gradually...

  • Page 33

    Installation adjustment mode 8-6 5975607 barcodata 808s 120397 crt projection angle adjustment the projection angle of the red and blue crt's is dependent on the desired size of the projected image. If the centers of green, blue and red do not coincide, the crt projection angle must be adjusted. Not...

  • Page 34

    Installation adjustment mode 8-7 5975607 barcodata 808s 120397 loosen bolts e, f, g and h to pivot the blue crt until the center of the blue image and the center of the green image coincide. When the angle of the blue crt is corrected, tighten the four bolts. Press the key to continue with the diago...

  • Page 35

    Installation adjustment mode 8-8 5975607 barcodata 808s 120397.

  • Page 36

    Messages, warnings and failure codes 9-1 5975607 barcodata 808s 120397 9 messages, warnings and failure codes source 01 fh= 15.6 khz fv= 050 hz source 01 fh= 15.6 khz fv= 050 hz announcement of the selected source. Enter password xxxx message to enter your password. Password contains 4 digits. Text ...

  • Page 37

    Messages, warnings and failure codes 9-2 5975607 barcodata 808s 120397 warning : go to stand by projector will switch to 'standby' when the rcvds is no longer available. Warning : invalid frequency input the entered frequency or applied frequency of the source is out of the projector's range. Warnin...

  • Page 38

    Appendix a: barco ceiling mount support a-1 5975607 barcodata 808s 170397 a barco ceiling mount support this appendix gives only an overview of the contents of the installa- tion guidelines and some overview drawings. The installation guidelines for the barco ceiling mounting support can be ordered ...

  • Page 39

    Appendix a: barco ceiling mount support a-2 5975607 barcodata 808s 170397 projector position corrections water-level adjustment d projector axis adjustment c.

  • Page 40

    Appendix b: g2 adjustment b-1 5975996 barcodata 808s 170397 b g2 adjustment once the on-screen menu "g2 adjustment" is displayed, proceed as follows : *$'-8670(17 to return use the potentiometers on the g2-adj. Module to set the screen grid voltage for red, green and blue. Adjust until the led on th...

  • Page 41

    Appendix b: g2 adjustment b-2 5975607 barcodata 808s 170397.

  • Page 42

    Gamma corrections c-1 5975607 barcodata 808s 170397 c gamma corrections when entering the gamma corrections, a warning will be displayed : "risk of incorrect adjustment of the projector. The gamma corrections are factory adjusted using an actas color analyzer ! Therefore, only qualified installation...

  • Page 43

    Gamma corrections c-2 5975607 barcodata 808s 170397 to carry out the red and blue midlights correction : push the control stick forward or backward to highlight the item r & b midlights in the menu and then press the key. If the key is pressed, the projector will return to the service menu. After th...

  • Page 44

    Formula outside package dimensions (inches) chemical family federal stock number (fsn) gross weight (lbs) % treshold limit value (units) alloys and metallic coatings % % pigments solvents additives catalyst vehicle hazardous mixtures of other liquids, solids, or gases appearance and odor boiling poi...

  • Page 45

    Stability unstable stable conditions to avoid incompatability (materials to avoid) hazardous decomposition products hazardous polymerization will not occur conditions to avoid may occur steps to be taken in case material is released or spilled waste disposal method respiratory protection (specific t...