1. DL manuals
  2. Barco
  3. Projector
  4. R9002384
  5. Owner's Manual

Barco R9002384 Owner's Manual

Summary of R9002384

  • Page 1

    Please read this manual is provided as a free service by projector.Com. We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners. About projector.Com projecto...

  • Page 2: Barco Projection Systems

    Downloaded from projector.Com barco projection systems date : 10012001 owner's manual rev. : 00 ciné 7 r9002384 r9002385 art. No. : r5976197.

  • Page 3

    Downloaded from projector.Com due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, january 2001. All rights reserved. Trademarks are the rights of their respective owners. Barco n.V./projection systems noordlaan 5 b-8520 kuurne belgium t...

  • Page 4: Table Of Contents

    Downloaded from projector.Com table of contents i-1 5976066 barcocine 7 10012001 i table of contents table of contents....................................................................................................... I-1 safety instructions .........................................................

  • Page 5

    Downloaded from projector.Com table of contents i-2 5976197 barcocine 7 10012001 projector address .......................................................................................................................................... 3-5 why a projector address ? ...................................

  • Page 6

    Downloaded from projector.Com table of contents i-3 5976066 barcocine 7 10012001 iris auto converge .......................................................................................................................................5-8 what can be done ? .............................................

  • Page 7

    Downloaded from projector.Com table of contents i-4 5976197 barcocine 7 10012001 what can be done ? ...................................................................................................................................... 7-7 how to select a new scan rate ? ................................

  • Page 8

    Downloaded from projector.Com table of contents i-5 5976066 barcocine 7 10012001 convergence adjustment ............................................................................................................................. 7-23 what has to be done ? ..............................................

  • Page 9

    Downloaded from projector.Com table of contents i-6 5976197 barcocine 7 10012001 deletion of all blocks .....................................................................................................................................8-9 what can be done ? ...........................................

  • Page 10: Safety Instructions

    Downloaded from projector.Com safety instructions 1-1 5976197 barcocine 7 10012001 1 safety instructions safety instructions notice on safety this equipment is built in accordance with the requirements of the international safety standards en60950, ul 1950 and csa c22.2 no.950, which are the safety ...

  • Page 11

    Downloaded from projector.Com safety instructions 1-2 5976197 barcocine 7 10012001 safety warning to prevent fire or electrical shock hazard, do not expose this equipment to rain or moisture federal communication commission (fcc statement) this equipment has been tested and found to comply with the ...

  • Page 12

    Downloaded from projector.Com safety instructions 1-3 5976197 barcocine 7 10012001 6. Lightning - for added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the p...

  • Page 13

    Downloaded from projector.Com safety instructions 1-4 5976197 barcocine 7 10012001.

  • Page 14: Connections

    Downloaded from projector.Com connections 2-1 5976197 barcocine 7 10012001 2 connections power connection to projector ac power (mains) cord connection use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the front of th...

  • Page 15

    Downloaded from projector.Com connections 2-2 5976197 barcocine 7 10012001 source no projector input press digit button 1 comp. Video 1 2 s-video* 2 3 rgbs or rgsb** 3 3 rgb3s or rg3sb*** 4 3 (r-y)y(b-y)s or (r-y)ys(b-y)**** 5 3 (r-y)y(b-y)3s or (r-y)y3s(b-y)***** 6 connecting a composite video sour...

  • Page 16

    Downloaded from projector.Com connections 2-3 5976197 barcocine 7 10012001 input selection a. With the rcu : press digit button 2 or b. With the local keypad. (for access to the local keypad, see 'local keypad' in chapter 'getting started'.) 1 press adjust key, the general access menu is displayed o...

  • Page 17

    Downloaded from projector.Com connections 2-4 5976197 barcocine 7 10012001 connecting a rgb analog source with composite sync. Rgb analog input terminals with composite sync input or with sync on green. The projector detects automatically where the sync signal is located. Note : if a line doubler or...

  • Page 18

    Downloaded from projector.Com connections 2-5 5976197 barcocine 7 10012001 comm port (800 peripherals) remote s video s-video r g b s analog out input r g(s) b r-y y( s) b -y rs232 out rs232 in menu 1 rgbs or rgsb input selection a. Press digit button 3 on the rcu or b. With the local keypad : (to g...

  • Page 19

    Downloaded from projector.Com connections 2-6 5976197 barcocine 7 10012001 comm port (800 peripherals) remote s video s-video professional vcr audio amplifier r g(s) b r- y y( s) b -y rs232 out rs232 in rgb3s or rg3sb input selection a. Press digit button 4 on the rcu or b. With the local keypad : (...

  • Page 20

    Downloaded from projector.Com connections 2-7 5976197 barcocine 7 10012001 comm port (800 peripherals) remote s video s-video professional vcr with tri-level sync audio amplifier r g(s) b r -y y( s) b -y rs232 out rs232 in connecting a component source with tri-level sync. (r-y)y(b-y) analog input t...

  • Page 21

    Downloaded from projector.Com connections 2-8 5976197 barcocine 7 10012001 applications a) remote control: - easy adjustment of the projector via ibm pc (or compatible) or mac connection. - allow storage of multiple projector configurations and set ups. - wide range of control possibilities. - addre...

  • Page 22: Getting Started

    Downloaded from projector.Com getting started 3-1 5976197 barcocine 7 10012001 3 getting started remote control & local keypad battery installation in the rcu two batteries are packed together with the rcu. Before using your rcu, install first these batteries. 1 remove the battery cover on the backs...

  • Page 23

    Downloaded from projector.Com getting started 3-2 5976197 barcocine 7 10012001 gaining access to the local keypad the local keypad is covered by a door on which the projector logo is screened (image 1). To open this door, push as indicated on next drawing and turn it to the front side of the project...

  • Page 24

    Downloaded from projector.Com getting started 3-3 5976197 barcocine 7 10012001 1 function keys : user programmable keys with functions for direct access. 2 adj. : adjust key, to enter or exit the adjustment mode. 3 address key (recessed key), to enter the address of the projector (between 0 and 9). ...

  • Page 25

    Downloaded from projector.Com getting started 3-4 5976197 barcocine 7 10012001 ceiling screen ir sensor rcu start up in operational mode the projector can start up with the selected source or the projector can start up with a warm up cycle message (menu 1). Projector warm up a full white pattern wil...

  • Page 26

    Downloaded from projector.Com getting started 3-5 5976197 barcocine 7 10012001 front of projector rear side of projector rcu 45 0 45 0 45 0 45 0 f1 f2 f3 f4 f5 adj e xi t ent er p a u se phase te x t s ha rp n ti nt c ol o r b rig ht n c on tr tr eble b al an c e b as s v ol 9 0 7 8 5 6 3 4 1 2 f1 f...

  • Page 27

    Downloaded from projector.Com getting started 3-6 5976197 barcocine 7 10012001 before using the rcu the rcu is default programmed with address 0 or 1, 'common address'. Regarding to the internal wiring of the rcu the default address can be 0 or 1 (call for technical assistance to change the common a...

  • Page 28

    Downloaded from projector.Com getting started 3-7 5976197 barcocine 7 10012001 general access select with , or then . To return sharpness tint color brightness contrast 5 6 3 4 1 2 enter adjust general access select with , or then . To return sharpness tint color brightness contrast 5 6 3 4 1 2 ente...

  • Page 29

    Downloaded from projector.Com getting started 3-8 5976197 barcocine 7 10012001 when a picture control is selected, a text box with bar scale and the function name of the control (e.G. Brightness) appear on the screen. The length of the bar scale indicates the current memorized setting for this sourc...

  • Page 30

    Downloaded from projector.Com start up adjustment mode 4-1 5976197 barcocine 7 10012001 4 start up of the adjustment mode adjustment mode start up all picture adjustments are made while in the 'adjustment mode'. Two possible ways to enter the adjustment mode : using the rcu. Press the adjust key. Th...

  • Page 31

    Downloaded from projector.Com start up adjustment mode 4-2 5976197 barcocine 7 10012001 possible paths depending on the projector configuration the following paths are possible with the 'main menu'. Image control - allows to change the color temperature of the image and to select another format (adj...

  • Page 32: Main Menu

    Downloaded from projector.Com main menu 5-1 5976197 barcocine 7 10012001 5 main menu main menu overview flowchart main menu color adjust format select iris touch up iris auto converge normal stereo pseudo stereo mono spatial stereo image control iris control sound control iris full alignment f1 f3 f...

  • Page 33

    Downloaded from projector.Com main menu 5-2 5976197 barcocine 7 10012001 image control starting up 1 push the cursor keys é or ê to select 'image control' (menu 1). The selected item will change in color and a marker will be displayed in front of it. 2 press enter to select. The 'image control' menu...

  • Page 34

    Downloaded from projector.Com main menu 5-3 5976197 barcocine 7 10012001 multiplier mode what can be selected within the multiplier mode ? The multiplier menu makes it possible to select different scan rate for the connected video signal. How to start up the multiplier mode menu ? 1 push the cursor ...

  • Page 35

    Downloaded from projector.Com main menu 5-4 5976197 barcocine 7 10012001 motion processing why motion processing ? With this function it is possible to recognize whether the source material was originally film or video. That prevents the creation of motion artifacts. How to activate ? 1 push the cur...

  • Page 36

    Downloaded from projector.Com main menu 5-5 5976197 barcocine 7 10012001 noise reduction what can be done ? Noisy, lower quality video images can be ameliorated by use of the noise reduction feature. How to select and adjust the noise reduction ? 1 push the cursor keys é or ê to select 'noise reduct...

  • Page 37

    Downloaded from projector.Com main menu 5-6 5976197 barcocine 7 10012001 color adjust what can be done ? The color temperature of the image can be installed. The customer has the choise between 4 factory preset color temperatures and one custom. This custom color temperature has to be adjusted in th...

  • Page 38

    Downloaded from projector.Com main menu 5-7 5976197 barcocine 7 10012001 how to add a name to a 'format' ? 1 push the cursor keys é or ê to select the format to which a name has to be added (menu 1). 2 press text to display the compose menu (menu 2). 3 the position of the character which will be edi...

  • Page 39

    Downloaded from projector.Com main menu 5-8 5976197 barcocine 7 10012001 how to start up the iris touch up ? 1 push the cursor keys é or ê to select 'iris touch up' (menu 1). 2 press enter to activate the touch up function. The process starts and when successfully completed, the projector will retur...

  • Page 40

    Downloaded from projector.Com main menu 5-9 5976197 barcocine 7 10012001 sound control what can be done ? When the sound option is available, the following sound modes can be selected : normal stereo, spatial stereo, pseudo stereo or mono. How to start up and to select the sound control ? 1 push the...

  • Page 41

    Downloaded from projector.Com main menu 5-10 5976197 barcocine 7 10012001 how to enter the service menu ? 1 push the cursor keys é or ê to select 'service menus' (menu 1). 2 press enter to select. A warning will be displayed (menu 2). "risk of incorrect adjustment of the projector. The following ser...

  • Page 42

    Downloaded from projector.Com entering the service menus 6-1 5976197 barcocine 7 10012001 6 entering the service menus service menus what is available in the service menus ? A complete set of adjustments divided in different modes are available to adjust the projector the different mode are : iris :...

  • Page 43

    Downloaded from projector.Com entering the service menus 6-2 5976197 barcocine 7 10012001 password protection some items in the adjustment mode are password protected. While selecting such an item, the projector asks to enter your password. (password protection is only available when the password st...

  • Page 44

    Downloaded from projector.Com 7-1 5976197 barcocine 7 10012001 random access adjustment mode 7 random access adjustment mode picture tuning setup pattern selection h phase raster shift v centerline bow side bow v centerline skew side keystone left-right (e-w) h centerline bow top keystone h centerli...

  • Page 45

    Downloaded from projector.Com 7-2 5976197 barcocine 7 10012001 random access adjustment mode choose a setup pattern from below : selected source genlocked pattern internal # pattern source 01 select with é or ê then to return. Internal # pattern khz / hz 15.6/50 pal/secam 15.7/60 ntsc 31.2/50 edtv 3...

  • Page 46

    Downloaded from projector.Com 7-3 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê then to return. Random access adjustment mode picture tuning geometry convergence color select select with é or ê to accept to return. Picture tuning color balance sync : fast decoding : e...

  • Page 47

    Downloaded from projector.Com 7-4 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê to accept to return. Color balance fixed color balance 3200 5400 6500 9300 custom white balance red & blue green custom black balance red & blue green select with arrow keys then you can a...

  • Page 48

    Downloaded from projector.Com 7-5 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê to accept to return. Picture tuning color balance sync : fast decoding : ebu port2 : video peaking : off line multiplier : on select with é or ê to accept to return. Picture tuning color b...

  • Page 49

    Downloaded from projector.Com 7-6 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê to accept to return. Picture tuning color balance sync : fast decoding : ebu port 2 : video peaking: off line multiplier select with é or ê then to return. Image processing line multiplier...

  • Page 50

    Downloaded from projector.Com 7-7 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê then to return. Linemultiplier output mode 50hz 625 lines ni 50hz 935 lines ni 100hz 625 lines ni 50hz 1250 lines ni 100hz 1250 lines i select with é or ê then to return. Linemultiplier ou...

  • Page 51

    Downloaded from projector.Com 7-8 5976197 barcocine 7 10012001 random access adjustment mode anwahl und einstellung der rauschunterdrückung 1 wählen sie noise reduction mit é oder ê (menü 6e). 2 rufen sie mit enter das textfeld zur einstellung auf (menü 9). 3 stellen sie die rauschverminderung mit é...

  • Page 52

    Downloaded from projector.Com 7-9 5976197 barcocine 7 10012001 random access adjustment mode contrast enhancem. -3 +3 0 contrast enhancement what can be done ? Enhancing the contrast results in a more dynamic image. How to select and adjust the contrast enhancement ? 1 push the cursor keys é or ê to...

  • Page 53

    Downloaded from projector.Com 7-10 5976197 barcocine 7 10012001 random access adjustment mode luminance delay - + 0 luminace delay when is it necessary ? When a color shift is recognized on the screen. E.G. If color bars are projected and a line between the color is recognized. How to adjust ? 1. Pu...

  • Page 54

    Downloaded from projector.Com 7-11 5976197 barcocine 7 10012001 random access adjustment mode menu 1 select with é or ê then to return. Line multiplier time base correction luminance delay v sync ref : indirect clamp gating : off limo plus options factory preset warning : advanced adjustment should ...

  • Page 55

    Downloaded from projector.Com 7-12 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê then to return. Line multiplier coring lti cti warning : advanced adjustment should be performed only by qualified personnel ! Menu 2 select with é or ê then to return. Menu 1 line multip...

  • Page 56

    Downloaded from projector.Com 7-13 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê then to return. Menu 1 cti 0 7 menu 2 good aligened bad aligened line multiplier coring lti cti warning : advanced adjustment should be performed only by qualified personnel ! Menu 1 sele...

  • Page 57

    Downloaded from projector.Com 7-14 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê then to return. Geometry h phase raster shift left-right (e-w) top-bottom (n-s) size v linearity blanking h phase > 70 h phase > 70 select with é or ê then to return. Random access adjust...

  • Page 58

    Downloaded from projector.Com 7-15 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê then to return. Geometry h phase raster shift left-right (e-w) top-bottom (n-s) size v linearity blanking select with é or ê then to return. Coarse shift green horizontal green vertical r...

  • Page 59

    Downloaded from projector.Com 7-16 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê then to return. Select with é or ê then to return. Left-right (e-w) v centerline bow v centerline skew right bow right keystone left bow left keystone seagull correction geometry h phase ...

  • Page 60

    Downloaded from projector.Com 7-17 5976197 barcocine 7 10012001 random access adjustment mode select with or then to return. Left-right (e-w) v centerline bow v centerline skew right bow right keystone left bow left keystone seagull correction corrects for curvature of the vertical lines on the left...

  • Page 61

    Downloaded from projector.Com 7-18 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê then to return. Select with é or ê then to return. Top-bottom (n-s) h centerline bow h centerline skew top keystone top bow bottom keystone bottom bow seagull correction geometry h phase ...

  • Page 62

    Downloaded from projector.Com 7-19 5976197 barcocine 7 10012001 random access adjustment mode top-bottom select with or then to return. H centerline bow h centerline skew top bow top keystone bottom bow bottom keystone how to enter an alignment ? To enter an alignment : 1. Push the cursor key é or ê...

  • Page 63

    Downloaded from projector.Com 7-20 5976197 barcocine 7 10012001 random access adjustment mode select with or then to return. H size 70 geometry h phase raster shift left-right (e-w) top-bottom (n-s) size v linearity blanking image too tall image too short ideal image hight ideal image hight select w...

  • Page 64

    Downloaded from projector.Com 7-21 5976197 barcocine 7 10012001 random access adjustment mode select with é or ê then to return. Geometry h phase raster shift left-right (e-w) top-bottom (n-s) h size v linearity v size blanking v linearity 70 select with é or ê then to return. Select with é or ê the...

  • Page 65

    Downloaded from projector.Com 7-22 5976197 barcocine 7 10012001 random access adjustment mode bottom blanking top blanking right blanking left blanking select with or then to return. Blanking top bottom left right how to adjust the blanking ? Adjust the next blanking alignments until the image is co...

  • Page 66

    Downloaded from projector.Com 7-23 5976197 barcocine 7 10012001 random access adjustment mode select with or then to return. Convergence select with or then to return. Green only red on green blue on green 9 8 5 4 1 2 3 6 10 18 7 15 22 random access adjustment mode picture tuning geometry convergenc...

  • Page 67

    Downloaded from projector.Com 7-24 5976197 barcocine 7 10012001 random access adjustment mode.

  • Page 68: Service Mode

    Downloaded from projector.Com service mode 8-1 5976197 barcocine 7 10012001 8 service mode service mode. Start up 1. Push the cursor key é or ê to select to service (menu 1). 2. Press enter to select. The service menu will be displayed (menu 2). Some items in the service mode are password protected ...

  • Page 69

    Downloaded from projector.Com service mode 8-2 5976197 barcocine 7 10012001 projector set-up what can be done ? Within the projector set-up menu, the following items can be consultated or set to the desired setting : - identification - total run time - change password - change language - change proj...

  • Page 70

    Downloaded from projector.Com service mode 8-3 5976197 barcocine 7 10012001 projector set-up identification total run time change password change language change projector address change baudrate power up mode : operating common address : 0 barco logo proj. Address : 001 soft. Version : 6.00 config....

  • Page 71

    Downloaded from projector.Com service mode 8-4 5976197 barcocine 7 10012001 how to select ? To select change password : 1. Push the cursor key é or ê to highlight 'change password' (menu 1). 2. Press enter to display the password menu (menu 2). If it is the first time you enter a password protected ...

  • Page 72

    Downloaded from projector.Com service mode 8-5 5976197 barcocine 7 10012001 how to change that address ? To change that address, handle as follow : 1. Push the cursor key é or ê to highlight 'change projector address' (menu 1). 2. Press enter to select. The change projector address menu (menu 2) wil...

  • Page 73

    Downloaded from projector.Com service mode 8-6 5976197 barcocine 7 10012001 how to change the mode ? To change the power up mode: 1. Push the cursor key é or ê to highlight power up (menu 1). 2. Press enter to toggle between 'operating' and 'standby'. Select with é or ê then to return. Projector set...

  • Page 74

    Downloaded from projector.Com service mode 8-7 5976197 barcocine 7 10012001 select with é or ê then to return. Service mode projector set-up memory management common settings i2c diagnostics select with é or ê then to return. Memory management copy a block delete a block delete all blocks all settin...

  • Page 75

    Downloaded from projector.Com service mode 8-8 5976197 barcocine 7 10012001 deletion of blocks what can be done ? The delete function is used to clear all data (settings) from an adjustment block. A delete can be given : - block by block or - for all blocks. This item is password protected. Deleting...

  • Page 76

    Downloaded from projector.Com service mode 8-9 5976197 barcocine 7 10012001 select with é or ê then to return. Memory management copy a block delete a block delete all blocks all settings to midpos r & b convergence mid gr convergence mid delete all block all block will be deleted ! To confirm to ca...

  • Page 77

    Downloaded from projector.Com service mode 8-10 5976197 barcocine 7 10012001 select with é or ê then to return. Memory management copy a block delete a block delete all blocks all settings to midpos r & b convergence mid gr convergence mid r & b convergence mid convergence settings in current block ...

  • Page 78

    Downloaded from projector.Com service mode 8-11 5976197 barcocine 7 10012001 select with é or ê then to return. Memory management copy a block delete a block delete all blocks all settings to midpos r & b convergence mid gr convergence mid green convergence mid what can be done ? The green convergen...

  • Page 79

    Downloaded from projector.Com service mode 8-12 5976197 barcocine 7 10012001 crt run in cycle a flashing white pattern will be generated until is pressed. The projector only uses memory blocks adjusted on an internal # pattern; if no such block is available, the projector can't run the procedure and...

  • Page 80

    Downloaded from projector.Com service mode 8-13 5976197 barcocine 7 10012001 projector warm up what can be done ? When in the on position (and the crt run in cycle is off), the projector can start up with a warm up periode of 20 minutes. During the start up a warm up menu will be displayed. This men...

  • Page 81

    Downloaded from projector.Com service mode 8-14 5976197 barcocine 7 10012001 source xx memory bank 4 select with or then to return. Common settings g2 adjustment crt run in cycle projector warm up memory banks : on select with or then to return. Service mode projector set-up memory management common...

  • Page 82: Programmable Function Keys

    Downloaded from projector.Com programmable function keys 9-1 5976197 barcocine 7 10012001 9 programmable function keys programmable function keys what can be done with these keys the five function keys on top of the remote control can be programmed as short cut keys (quick access) to almost any adju...

  • Page 83

    Downloaded from projector.Com programmable function keys 9-2 5976197 barcocine 7 10012001 convergence blue on green horizontal phase h & v size vertical linearity green horizontal coarse shift green vertical coarse shift red vertical coarse shift vertical centerline bow vertical centerline skew righ...

  • Page 84

    Downloaded from projector.Com messages, warnings and failures 10-1 5976197 barcocine 7 10012001 10 messages, warnings and failures when selecting a new source, information about this source will be displayed on the screen. Source number, horizontal and vertical fre- quencies of the displayed source....

  • Page 85

    Downloaded from projector.Com messages, warnings and failures 10-2 5976197 barcocine 7 10012001 failure rcvds com- munication error serial communication error be- tween the rcvds and the projector. Fan failed projector will switch off message when one of the fans are not working anymore. Projector s...

  • Page 86: Numbers 90 - 99

    Downloaded from projector.Com adjustment blocks and source numbers 90-99 a-1 5976197 barcocine 7 10012001 adjustment blocks (memory blocks) what are adjustment block ? As the projector is digitally controlled, all geometry and convergence adjustments are stored in the projector’s memory as numeric v...

  • Page 87

    Downloaded from projector.Com adjustment blocks and source numbers 90-99 a-2 5976197 barcocine 7 10012001 source input 0 source number 0 source number 90 block header a block header a, different analog settings source input 1 source number 1 source number 91 block header b block header b, different ...

  • Page 88: Please Read

    Please read this manual is provided as a free service by projector.Com. We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners. About projector.Com projecto...