1. DL manuals
  2. Barco
  3. Projector
  4. R9010310
  5. Owner's Manual

Barco R9010310 Owner's Manual

Manual is about: Barco Projector Owner's manual R9010310

Summary of R9010310

  • Page 1

    Slm r9+ owner’s manual r9010310 r5976801/01 20/10/2004.

  • Page 2

    Barco nv events noordlaan 5, b-8520 kuurne phone: +32 56.36.89.70 fax: +32 56.36.88.24 e-mail: events@barco.Com visit us at the web: www.Barco.Com printed in belgium.

  • Page 3

    Changes barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) desc...

  • Page 5: Table Of Contents

    Table of contents table of contents 1. Safety instructions .................................................................................................. 5 1.1 warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 6

    Table of contents 7. Random access adjustment mode .............................................................................57 7.1 overview flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 7

    Table of contents 9.2 start up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .101 9.3 identificat...

  • Page 8

    Table of contents 4 r5976801 slm r9+ 20/10/2004.

  • Page 9: 1. Safety Instructions

    1. Safety instructions 1. Safety instructions 1.1 warnings to prevent personnel injury the customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to barco. To prevent injuries and physical damage, always read this manual and all label...

  • Page 10

    1. Safety instructions extra safety manual read also safety instructions in separate manual (r5976125). 6 r5976801 slm r9+ 20/10/2004.

  • Page 11

    2. Packaging and dimensions 2. Packaging and dimensions overview • projector packaging • box content • lamp packaging • lens packaging • projector dimensions 2.1 projector packaging way of packaging the projector is packed in a carton box. To provide protection during transportation, the projector i...

  • Page 12

    2. Packaging and dimensions 2.3 lamp packaging way of packaging as it is not allowed to transport the projector with the lamp mounted inside the projector, this lamp is packed in a separate carton box. Save this carton box , it can be used to repack the lamp when you ever have to transport your proj...

  • Page 13

    2. Packaging and dimensions side view air in air in adjustable feet dual stack interlocking dual stack interlocking image 2-3 side view dimensions r5976801 slm r9+ 20/10/2004 9.

  • Page 14

    2. Packaging and dimensions 10 r5976801 slm r9+ 20/10/2004.

  • Page 15: 3. Installation Guidelines

    3. Installation guidelines 3. Installation guidelines 3.1 general w arning : before installing the projector, read first the safety instructions. Ambient temperature conditions. Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are...

  • Page 16

    3. Installation guidelines the gain of screens range from a white matte screen with a gain of 1 (x1) to a brushed aluminized screen with a gain of 10 (x10) or more. The choice between higher and lower gain screens is largely a matter of personal preference and another consideration called the viewin...

  • Page 17

    3. Installation guidelines positioning the projector table mounted, front projection screen pd b floor projector cd sh optical axis projection lens sh sw side view back view screen top view sw floor table/top side facing ceiling a cd = sh/2 + b - a image 3-2 table mounted configuration r5976801 slm ...

  • Page 18

    3. Installation guidelines table mounted, front projection, second way. Screen pd b floor projector cd sh optical axis projection lens sh sw side view back view screen top view sw floor table/top side facing floor a cd = sh/2 + b + a - 554mm image 3-3 table mounted configuration up side down ceiling...

  • Page 19

    3. Installation guidelines ceiling mounted, front projection, second way. Screen pd b ceiling projector cd sh optical axis projection lens sh sw side view back view screen ceiling view sw ceiling ceiling/top side facing ceiling a cd = sh/2 + b + a - 554mm image 3-5 ceiling mounted projector 3.3 safe...

  • Page 20

    3. Installation guidelines a ir o u t image 3-6 safety area around the projector 16 r5976801 slm r9+ 20/10/2004.

  • Page 21

    3. Installation guidelines 3.4 projector tilting turning around the projection axes (e) front view (d)lamp axis 15° 15° (c) start point image 3-7 tilting diagram a allowed projector tilting area b forbidden projector tilting area c start point d lamp axis e front view consider the starting point at ...

  • Page 22

    3. Installation guidelines 3.5.1 access to the lamp unit. What has to be done to access the lamp casing, a side panel has to be removed. Necessary tools a flatblade screwdriver of 5 mm removing the side panel 1. Turn with a screwdriver the side panel lock screw a quarter turn counter clockwise. (ima...

  • Page 23

    3. Installation guidelines necessary tools flatblade screwdriver of 5mm or nut driver 8mm installing the lamp unit 1. Remove the lock nut on the 3 spacer screws (a). (image 3-10) 2. Line up the lamp unit guides with the guides on the projector frame (b) and push the unit into the frame until it fits...

  • Page 24

    3. Installation guidelines image 3-11 inserting the lamp image 3-12 securing the lamp 3.5.3 reinstalling the side panel what has to be done after the new lamp unit has been installed, the side panel has to be remounted. Necessary tools a flatblade screwdriver of 5 mm reinstalling the side panel 1. M...

  • Page 25

    3. Installation guidelines image 3-13 mounting the side cover image 3-14 closing the side cover image 3-15 locking the side cover 3.6 re-adjusting the lamp position in the lamp casing w arning : as the projector has to be opened, this procedure has to be performed by qualified service tech- nician. ...

  • Page 26

    3. Installation guidelines suggestion lamp runtime is 105 hours it is advisable to adjust the z-axis of the lamp to obtain maximum light output (see owners manual) to confirm menu 3-1 the user can now adjust the z-axis by following the next procedure. How to readjust. 1. On the side of the inputs, t...

  • Page 27

    3. Installation guidelines a image 3-17 c aution : never turn the other screws ! These are factory aligned. 3.7 lenses c aution : never remove the lens while the projector is running. Overview • lenses • lens selection • lens formulas • lens installation • cleaning the lens 3.7.1 lenses standard ava...

  • Page 28

    3. Installation guidelines tld hb(2.8–5.0:1) r9842100 tld hb(5.0–8.0:1) r9842120 extra lenses for slm r9+ the projector can also be equipped with tld lenses. But when using these lenses, the light output of the projector will be lower. Tld(1.6–2.0:1) r9840670 tld(2.0–2.8:1) r9840680 tld(2.8–5.0:1) r...

  • Page 29

    3. Installation guidelines metric formulas (meter) inch formulas (inch) tld(2.8–5.0:1) pd min =2.58xsw-0.16 pd max =4.71xsw-0.38 pd min =2.58xsw-6.30 pd max =4.71xsw-14.96 tld(5.0–8.0:1) pd min =4.52xsw-0.01 pd max =7.53xsw-0.29 pd min =4.52xsw-0.39 pd max =7.53xsw-11.42 3.7.4 lens installation how ...

  • Page 30

    3. Installation guidelines w arning : do not use fabric softener when washing the cleaning cloth or softener sheets when drying the cloth. Do not use liquid cleaners on the cloth as doing so will contaminate the cloth. C aution : other lenses can also be cleaned safely with this toraysee tm cloth. 3...

  • Page 31

    3. Installation guidelines how to stack? Handle as follow: 1. Put the second projector on the first one so that base plate of the second projector matches with the rigging socket of the first projector. (image 3-22) 2. Turn the rigging sockets of the second projector counter clockwise until they are...

  • Page 32

    3. Installation guidelines a image 3-24 mounting the security chain image 3-25 mounting the security hook c b b image 3-26 mounting the security hook (detail) how to open a secured rigging point? 1. Push the ring (a) of the first projector downwards and hold it in that position. (image 3-27) 2. Turn...

  • Page 33

    3. Installation guidelines a b image 3-27 opening the rigging sockets r5976801 slm r9+ 20/10/2004 29.

  • Page 34

    3. Installation guidelines 30 r5976801 slm r9+ 20/10/2004.

  • Page 35: 4. Connections

    4. Connections 4. Connections overview • power connection • switching on • switching to standby • switching off • input source connections • communication connections 4.1 power connection ac power cord connection use the supplied power cord to connect your projector to the wall outlet. Plug the fema...

  • Page 36

    4. Connections lamp run time indication while running when the total run time of the lamp is 30 hours less then maximum runtime, the following warning message will be displayed for 1 minute. This warning message will be repeated every 30 minutes. Press exit to remove the message before the minute is...

  • Page 37

    4. Connections 4.3 switching to standby how to switch to standby? 1. Press standby to switch the projector to standby. 4.4 switching off how to switch off the projector? 1. Press first standby. 2. Let cool down the projector until the fans stop blowing, at least 15 min. 3. Switch off the projector w...

  • Page 38

    4. Connections slot 1 rgb/component slot 2 video slot 3 not used slot 4 not used when using a rcvds05, it is recommended to use a 5-cable output module in the rcvds. The outputs of this module has to be connected to slot 1 of the projector. To switch the projector in the 5-cable mode see "fixed slot...

  • Page 39

    4. Connections how to select the new installed module? The new installed module can be selected with the digit buttons on the rcu or the local keypad. 4.5.4 fixed slot (slot 1 & 2) where to find? Slot 1 & 2 has 5 bnc input terminals for 5 cable input and a dvi plug for dvi input. Slot 1 has also an ...

  • Page 40

    4. Connections 5. Press enter. The internal system will scan the inputs and displays the result in the input slots menu. 6. Push the cursor key ↑ or ↓ to select the first or second slot. (menu 4-6) adjustment mode select a path from below : random access installation service select with ↑ or ↓ then ...

  • Page 41

    4. Connections out in on r 9840450 hd sdi digital module out in on 9840110 sdi digital input comm port trigger out rs232/422 out rs232/422 in ir-receiver diagnostic code green operation red stand-by ir sync ok hardwired remote ctrl 1 hardwired remote ctrl 2 two way hardwired remote ctrl 3 on on on o...

  • Page 42

    4. Connections out in on r 9840450 hd sdi digital module out in on 9840110 sdi digital input comm port trigger out rs232/422 out rs232/422 in ir-receiver diagnostic code green operation red stand-by ir sync ok hardwired remote ctrl 1 hardwired remote ctrl 2 two way hardwired remote ctrl 3 on on on o...

  • Page 43

    4. Connections out in on r 9840450 hd sdi digital module p r p b on comm port ethernet rs232/422 out rs232/422 in ir-receiver diagnostic code green operation red stand-by ir sync ok hardwired remote ctrl 1 hardwired remote ctrl 2 two way hardwired remote ctrl 3 on on on on dvi input dvi input dvi ou...

  • Page 44

    4. Connections 4.6 communication connections overview • rs232 (rs422) connection • linked system • communication with peripherals • network connection 4.6.1 rs232 (rs422) connection application 1. Remote control : - easy adjustment of projector via an ibm pc (or compatible) or mac connection. - allo...

  • Page 45

    4. Connections 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 pin number pin number db9 female connector db9 female connector 2 3 image 4-8 make a custom null modem cable r5976801 slm r9+ 20/10/2004 41.

  • Page 46

    4. Connections to next comm 800 splitter com 800 splitter 1 (r9827941) front slave 1 to switcher comm 800 splitter to slave 2 to slave 3 custom null modem cable to ir receiver front slave 4 to slave 5 to slave 6 to switcher comm 800 splitter to ir receiver back to proj.1 to proj.2 to proj.3 to proj....

  • Page 47

    4. Connections 4.6.3 communication with peripherals what is possible with an rcvds05 connected. • up to 20 inputs with the rcvds 05 and 90 inputs when rcvds’s are linked via the expansion module. • serial communication with the projector. • remote control buttons on the rcvds to control the projecto...

  • Page 48

    4. Connections out in on r 9840450 hd sdi digital module out in on 9840110 sdi digital input comm port trigger out rs232/422 out rs232/422 in ir-receiver diagnostic code green operation red stand-by ir sync ok hardwired remote ctrl 1 hardwired remote ctrl 2 two way hardwired remote ctrl 3 on on on o...

  • Page 49: 5. Getting Started

    5. Getting started 5. Getting started 5.1 rcu & local keypad how controlling the projector ? The projector can be controlled by the local keypad or by the remote control unit. Location of the local keypad ? The local keypad is located on the input side of the projector. Remote control functions. Thi...

  • Page 50

    5. Getting started 1 barco key selection key, to get direct access to the lens adjustment menus. 2 adj adjust key, to enter or exit the adjustment mode. 3 address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil, followed by pr...

  • Page 51

    5. Getting started - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 enter 32a pause - + phase freez text exit adj stby sharpness tint color brightness contrast help ? Color phase sharpn tint brightn standby enter text exit pause 2 1 4 3 5 6 8 0 9 7 contrast a image 5-2 lamp run time indication see chapter "4...

  • Page 52

    5. Getting started error dmd out of operating temperature range automatic shutdown is activated menu 5-1 5.4 quick set up adjustments overview • quick language change • quick lens adjustment • quick on screen color change 5.4.1 quick language change what can be done? Only if different on screen lang...

  • Page 53

    5. Getting started lens adjustment zoom/focus zoom with or , focus with or to shift to return image 5-3 press the selection key * to switch to another pattern. Different patterns are available. Quick shift adjustment 1. Press the selection key *, barco key. The zoom/focus menu will be displayed (ima...

  • Page 54

    5. Getting started 6. Push the cursor key ↑ or ↓ to highlight highlighted item color. 7. Press enter to toggle between red, green and yellow. Adjustment mode select a path from below : random access installation service select with ↑ or ↓ then to return menu 5-5 installation input slots 800 peripher...

  • Page 55

    5. Getting started out in on r 9840450 hd sdi digital module out in on 9840110 sdi digital input comm port 10/(100) base-t rs232/422 out rs232/422 in ir-receiver diagnostic code green operation red stand-by ir sync ok hardwired remote ctrl 1 hardwired remote ctrl 2 two way hardwired remote ctrl 3 on...

  • Page 56

    5. Getting started directly to one of the ir sensors when using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft in a straight line). The remote control unit will not function properly if strong light strikes the sensor window or if there are obstacl...

  • Page 57

    5. Getting started common address every projector has a common address ’0’ or ’1’. The choice between ’0’ and ’1’ can be selected in the service mode. 5.6.2 displaying and programming addresses displaying the projector address on the screen. 1. Press address key (recessed key on the rcu) with a penc...

  • Page 58

    5. Getting started to restart the image : • press pause key. • press exit key • select a source number. The stand-by key when the stand-by key is pressed, the image projection is stopped and the projector goes to stand-by. This situation is used when a projection stop is planned for a longer period....

  • Page 59

    6. Start up of the adjustment mode 6. Start up of the adjustment mode 6.1 start up possible paths there are 3 possible paths to follow once in the adjustment mode. They are : • installation - installation should be selected if a new input module is installed or a new source is connected to an existi...

  • Page 60

    6. Start up of the adjustment mode entering your password 1. The first digit position is highlighted. Enter the first digit. (menu 6-2) the highlighted square jumps to the next position. 2. Continue with the other digits example : 2 3 1 9 when your password is correct, you gain access to the selecte...

  • Page 61

    7. Random access adjustment mode 7. Random access adjustment mode overview • overview flow • picture services • picture tuning • geometry • scenergix • picture in picture (pip) • save changes 7.1 overview flow overview random acces adjustment mode picture tuning color temperature gamma color space n...

  • Page 62

    7. Random access adjustment mode start up 1. Push the cursor key ↑ or ↓ to highlight random access. (menu 7-1) 2. Press enter. (menu 7-2) adjustment mode select a path from below : random access installation service select with ↑ or ↓ then to return menu 7-1 random access adjustment mode file servic...

  • Page 63

    7. Random access adjustment mode possible file manipulations the following file manipulations are possible : • load : installation of a file for a new source. • edit : editing a loaded file to the source specs. • rename : renaming a file. • copy : copying a file. • delete : deleting a file • options...

  • Page 64

    7. Random access adjustment mode how to load a file ? 1. Push the cursor key ↑ or ↓ to select the best fitting file. (menu 7-7) 2. Press enter to select. A confirm load file menu will be displayed with the newly created file and the one on which the new file is based on. (menu 7-8) 3. Press enter to...

  • Page 65

    7. Random access adjustment mode 7.2.5.2 changing the settings different methods the 3 different methods to change a setting will be described hereafter. These methods are: • with the numeric keys on the remote control. • with the arrow keys selecting the changing digit. • with the arrow keys counti...

  • Page 66

    7. Random access adjustment mode vertical start number of lines between the start of the input signal and start of the image on the screen. Interlaced [on] or [off] this selection is automatically filled when active file has to be edited. If the image is wrong due to mismeasurement, use the enter ke...

  • Page 67

    7. Random access adjustment mode vertical refresh [sync/async] the way of updating the image information. Not available for pal-ntsc-secam sources. This option will be displayed in gray. • for sources with a vertical frequency up to 60 hz : the vertical refresh rate is the same as the vertical frequ...

  • Page 68

    7. Random access adjustment mode 7.2.6 rename start up to change the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight rename. (menu 7-13) 2. Press enter. The rename selection menu will be displayed. (menu 7-14) 3. Push the cursor key ↑ or ↓ to select a file name. 4. Press enter t...

  • Page 69

    7. Random access adjustment mode 7.2.7 copy start up to copy the name of a selected file : 1. Push the cursor key ↑ or ↓ to highlight copy. 2. Press enter. The copy selection menu will be displayed. (menu 7-17) 3. Push the cursor key ↑ or ↓ to select a file name. 4. Press enter to select. The copy f...

  • Page 70

    7. Random access adjustment mode 4. Press enter to select. If [all] is selected, your password has to be entered before all files will be deleted. A confirmation menu "delete file ’file name’?" is displayed. (menu 7-22) 5. Press enter to delete the file, press exit if you want to keep it. Note: the ...

  • Page 71

    7. Random access adjustment mode 7.3 picture tuning 7.3.1 start up start up to improve the image quality, the items in the picture tuning menu can be toggled or adjusted. To start up the picture tuning : 1. Push the cursor key ↑ or ↓ to highlight picture tuning. (menu 7-25) 2. Press enter to select....

  • Page 72

    7. Random access adjustment mode 0 1 white x image 7-3 7.3.3 gamma what can be adjusted ? With the gamma correction adjustment, it is possible to accurately set the gamma of the projector image. Changing the gamma value 1. Push the cursor key ↑ or ↓ to highlight gamma. (menu 7-29) 2. Press enter to ...

  • Page 73

    7. Random access adjustment mode how to select. 1. Push the cursor key ↑ or ↓ to highlight color space. (menu 7-30) the color space selection menu will be displayed. (menu 7-31) 2. Push the cursor key ↑ or ↓ to highlight the desired color space and press enter. Projector maximum color space ebu euro...

  • Page 74

    7. Random access adjustment mode 7.3.6 input balance why adjusting the input balance? The input balance is normally correct adjusted in the factory. But due to signal distribution or signal transmission, a color imbalance can be the result. This imbalance can be adjusted source by source for color c...

  • Page 75

    7. Random access adjustment mode 4. Adjust the contrast to a maximum value until the green noise becomes visible in the white areas and return one step. 5. Adjust with the cursor keys ↑ or ↓ or ← or → until the red respectively blue noise becomes visible in the white areas and return one step. Input...

  • Page 76

    7. Random access adjustment mode 7.3.6.3 returning to the factory defaults how to return to the factory defaults 1. Push the cursor key ↑ or ↓ to highlight default. (menu 7-38) 2. Press enter to select. The default settings will be loaded. Input balance black balance white balance default select wit...

  • Page 77

    7. Random access adjustment mode 7.4.2 geometry start up start up 1. Push the cursor key ↑ or ↓ to highlight geometry. (menu 7-39) 2. Press enter to select. The geometry menu will be displayed. (menu 7-40) adjustment mode select a path from below : random access installation service select with ↑ or...

  • Page 78

    7. Random access adjustment mode how to shift the image ? 1. Push the cursor key ↑ or ↓ to highlight shift. (menu 7-41) 2. Press enter to select. 3. Push the cursor key ↑ or ↓ to shift the image in a vertical direction. Push the cursor key ← or → to shift the image in a horizontal direction. Note: t...

  • Page 79

    7. Random access adjustment mode image 7-5 size adjustment a horizontal size adjustment b vertical size adjustment size adjustment 1. Push the cursor key ↑ or ↓ to highlight size. (menu 7-42) 2. Press enter to select. 3. Push the cursor key ↑ or ↓ to size the image in a vertical direction. Push the ...

  • Page 80

    7. Random access adjustment mode image 7-6 side keystone side keystone adjustment 1. Push the cursor key ↑ or ↓ to highlight side keystone. (menu 7-43) 2. Press enter to select. 3. Push the cursor key ← or → to adjust the keystone of the image. When the upper part of the image is wider than the lowe...

  • Page 81

    7. Random access adjustment mode image 7-7 blanking a top blanking b bottom blanking c left blanking d right blanking adjusting the blanking. 1. Push the cursor key ↑ or ↓ to highlight blanking. (menu 7-44) 2. Press enter to display the blanking menu. (menu 7-45) 3. Push the cursor key ↑ or ↓ to hig...

  • Page 82

    7. Random access adjustment mode how to set up the desired aspect ratio ? 1. Push the cursor key ↑ or ↓ to highlight aspect ratio. (menu 7-46) 2. Press enter to scroll between [5:4], [4:3], [16:9], [2.35], [1.88] or [1.78]. Geometry shift size side keystone blanking aspect ratio [4:3] options select...

  • Page 83

    7. Random access adjustment mode 7.5.1 order information order numbers slm g5 r9840880 slm r6 r9840890 slm g8/g10 r9841500 slm r8/r10/r9+/r12+ r9841510 7.5.2 introduction when available ? Scenergix is only available as an option, some menu items will be grayed out when this option is not installed. ...

  • Page 84

    7. Random access adjustment mode 7.5.3 preparations scenergix preparations to ensure proper scenergix adjustment, be sure that the following adjustments are done perfectly on all projectors: • convergence (electronic convergence). • geometry • color matching (color temperature, input balance, gamma)...

  • Page 85

    7. Random access adjustment mode horizontal resolution source : number of active pixels of the source. Adjustment of active pixels (pact) of the first projector 1. Go to file –> edit menu of first projector. 2. Enter value for horizontal active (= pact) as follows : pact = [(horz. Resolution of 1 pr...

  • Page 86

    7. Random access adjustment mode adjustment of active lines (lact) of second projector 1. Go to file –> edit menu of second projector. 2. Enter value for vertical act (= lact) as follows : lact = [(vert.. Resolution of 1 projector)/(total vert. Screen resolution)] x (vert. Resolution source) 3. Vert...

  • Page 87

    7. Random access adjustment mode image 7-12 width selections image 7-13 width set up for projector 1 r5976801 slm r9+ 20/10/2004 83.

  • Page 88

    7. Random access adjustment mode image 7-14 width set up for projector 2 7.5.8 adjusting the black level of the images why for dark images, the overlap zone will be brighter then the rest of the images. Therefore we can rise the black level of the remaining image (excluding the overlap zone). How to...

  • Page 89

    7. Random access adjustment mode 7.6 picture in picture (pip) overview • introduction to pip • picture in picture activation • picture in picture source • position of picture in picture window • set up of the quick selection 7.6.1 introduction to pip pip pip stands for "picture in picture" and allow...

  • Page 90

    7. Random access adjustment mode 7.6.2 picture in picture activation how to activate pip? 1. Push the cursor key ↑ or ↓ to highlight pip. (menu 7-53) 2. Press enter to select. The pip menu will be displayed. (menu 7-54) 3. Push the cursor key ↑ or ↓ to highlight status. 4. Press enter to toggle betw...

  • Page 91

    7. Random access adjustment mode how to position? 1. Push the cursor key ↑ or ↓ to highlight position. (menu 7-56) 2. Press enter to toggle between top-left, top-right, bottom-left or bottom-right. Pip status [on] source 01 position [top-left] quick select [off] select with ↑ or ↓ then to return men...

  • Page 92

    7. Random access adjustment mode 88 r5976801 slm r9+ 20/10/2004.

  • Page 93: 8. Installation Mode

    8. Installation mode 8. Installation mode overview • start up of the installation mode • input slots • 800 peripheral • source switching • no signal • contrast enhancement • convergence • configuration • lens adjustment • quick access keys • osd • internal patterns 8.1 start up of the installation m...

  • Page 94

    8. Installation mode to view or the change the input configuration. 1. Push the cursor key ↑ or ↓ to highlight input slots. (menu 8-3) 2. Press enter to select. The input slots menu will be displayed. (menu 8-4) installation input slots 800 peripheral source switching no signal contrast enhancement ...

  • Page 95

    8. Installation mode 8.3 800 peripheral overview • defining the output module of the rcvds05. • defining the infrared communication protocol • clo using comm 800 8.3.1 defining the output module of the rcvds05. Which module are available? When a rcvds05 is connected to the projector, the type of out...

  • Page 96

    8. Installation mode 8.3.3 clo using comm 800 what can be done? Clo can be activated in a linked system setup using the com800 protocol + ports. By using the com800 protocol + ports, the rs232 ports can be used for a rs232 linked setup, clo is received through the com800 ports, general rs232 command...

  • Page 97

    8. Installation mode image 8-1 example of seamless switching with fade effect. When an effect is selected within seamless source switching, wait until the effect is terminated before switch- ing to another source (± 2 seconds). 8.5 no signal overview • changing the background color • changing the sh...

  • Page 98

    8. Installation mode 8.5.2 changing the shutdown setting how to change ? 1. Push the cursor key ↑ or ↓ to highlight no signal. (menu 8-14) 2. Press enter to select. The no signal menu will be displayed. (menu 8-15) 3. Push the cursor key ↑ or ↓ to highlight shutdown.Menu 8-15 4. Press enter to toggl...

  • Page 99

    8. Installation mode to change the contrast enhancement value 1. Push the cursor key ↑ or ↓ to highlight contrast enhancement. (menu 8-18) 2. Press enter to select. The contrast enhancement menu will be displayed. (menu 8-19) 3. Push the cursor key ↑ or ↓ to highlight the desired contrast enhancemen...

  • Page 100

    8. Installation mode set up the correct configuration 1. Push the cursor key ↑ or ↓ to highlight configuration. (menu 8-23) 2. Press enter to select. The configuration menu will be displayed. Installation input slots 800 peripheral source switching no signal contrast enhancement convergence configur...

  • Page 101

    8. Installation mode how to zoom/focus ? 1. Push the cursor key ↑ or ↓ to select zoom/focus. (menu 8-26) 2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.See "quick set up adjustments", page 48 3. When finished, press exit to return to the lens adjustment menu or press enter to go...

  • Page 102

    8. Installation mode options the zoom/focus and shift can be set the same for all files. 1. Push the cursor key ↑ or ↓ to highlight options. (menu 8-28) 2. Press enter to select. The lens options menu will be displayed. (menu 8-29) 3. Press enter to toggle between ’yes’ or ’no’. [yes] all lens setti...

  • Page 103

    8. Installation mode 8.11 osd overview • color settings • menu position 8.11.1 color settings how to change 1. Push the cursor key ↑ or ↓ to highlight osd. (menu 8-32) 2. Press enter to select. 3. Push the cursor key ↑ or ↓ to highlight highlighted item color. (menu 8-33) 4. Press enter to toggle be...

  • Page 104

    8. Installation mode available patterns - outline - hatch - color bars - multiburst - checker board - page char - alpha numeric char how to select an internal patterns? 1. Push the cursor key ↑ or ↓ to highlight internal patterns. (menu 8-36) 2. Press enter to select. The internal patterns menu will...

  • Page 105: 9. Service Mode

    9. Service mode 9. Service mode 9.1 built-up built-up the service menu is built-up in two parts which are connected together with the ’more’ item. If the desired item is not in the list of the displayed menu, select ’more’ with the cursor key and push enter to display the other items in the service ...

  • Page 106

    9. Service mode start up 1. Push the cursor key ↑ or ↓ to highlight identification. (menu 9-4) 2. Press enter to display the identification screen. (menu 9-5) service identification change password change language change proj. Address serial communication network lamp dimming more... Select with ↑ o...

  • Page 107

    9. Service mode image 9-1 image 9-2 access password switch image 9-3 metal top cover image 9-4 how to change the password ? 1. Push the cursor key ↑ or ↓ to highlight change password. (menu 9-6) 2. Press enter to display the change password menu. (menu 9-7) note: only possible when owner. The old pa...

  • Page 108

    9. Service mode set up of an access control list. 1. Push the cursor key ↑ or ↓ to highlight change password. (menu 9-8) 2. Press enter to display the change password menu. (menu 9-9) note: only possible when owner. 3. Push the cursor key ↑ or ↓ to highlight access control list. 4. Press enter to di...

  • Page 109

    9. Service mode 9.5 changing language start up 1. Push the cursor key ↑ or ↓ to highlight change language. (menu 9-11) 2. Press enter to display the change language menu. (menu 9-12) 3. Push the cursor key ↑ or ↓ to highlight the desired language. 4. Press enter to change the language. Available lan...

  • Page 110

    9. Service mode 4. Press enter to activate. The address digit will be highlighted. 5. Select 0 or 1 with the ↑ or ↓ keys or, enter the new value with the numeric keys. Service identification change password change language change proj. Address serial communication network lamp dimming more... Select...

  • Page 111

    9. Service mode 9.7.2 baud rate setting set up to change the baud rate, handle as follow: 1. Push the cursor key ↑ or ↓ to highlight baudrate. (menu 9-19) the actual baud rate will be displayed. 2. Press enter to toggle between the available baudrates. Default : 9600 serial communication projector a...

  • Page 112

    9. Service mode 9.7.4 rs422 termination set up the last projector in a line should be rs422 terminated (on position). All others in the line should be in the off position. To change the termination position : 1. Push the cursor key ↑ or ↓ to highlight rs422 termination. (menu 9-21) the actual settin...

  • Page 113

    9. Service mode entering the necessary addresses. 1. Select the ip address with the cursor keys. (menu 9-24) 2. Press enter to edit. 3. Enter or reprogram the address with the numeric keys (contact your network responsible for the correct address). An address contains 4 octets with a maximum value o...

  • Page 114

    9. Service mode 100 clo value time [h] li g ht ou tp ut [% ] image 9-5 clo function of one projector linked clo, used by multiple projectors if the linked clo function is in the off position, the lamp of each projector will follow its own life cycle curve (dotted lines). When in the on position and ...

  • Page 115

    9. Service mode proj 1 proj 2 proj 3 proj 4 in in in in out out out rs rs rs terminator image 9-7 principal diagram : linking via rs port linking via the comm port the constant light output of the projectors can be set to the same value by linking the projectors via the comm port and using one or mo...

  • Page 116

    9. Service mode how to display the lamp menu 1. Push the cursor key ↑ or ↓ to highlight lamp. (menu 9-26) 2. Press enter to select. The lamp menu will be displayed. (menu 9-27) service identification change password change language change proj. Address serial communication network lamp dimming more....

  • Page 117

    9. Service mode how to dim 1. Push the cursor key ↑ or ↓ to highlight dimming. (menu 9-28) 2. Press enter to select. A dimming slider box appears on the screen. 3. Use the ↑ or ↓ keys to dim the lamp until the desired light output is reached. Service identification change password change language ch...

  • Page 118

    9. Service mode 9.12 add-ins how to get add ins? The available add-ins can be activated by entering your personal access key when buying this function. Please contact your reseller. He will ask for the serial number of your projector. Available add ins clo : when activated, the lamp option ‘constant...

  • Page 119

    9. Service mode start up 1. Push the cursor key ↑ or ↓ to highlight preset input balance. (menu 9-34) 2. Press enter to select. The following warning will be displayed : (menu 9-35) preset input balance is reserved to qualified service personnel. If you are not qualified, press exit to cancel the pa...

  • Page 120

    9. Service mode 9.15 diagnosis 9.15.1 how to start up the diagnosis? What can be seen? The diagnosis menu gives the possibility to select an overview of the i 2 c controlled ic’s and an overview of the working of the formatter. Start up 1. Push the cursor key ↑ or ↓ to highlight diagnosis. (menu 9-3...

  • Page 121

    9. Service mode 9.15.3 dmd how to select the overview? 1. Push the cursor key ↑ or ↓ to highlight dmd. (menu 9-42) 2. Press enter to select. An overview of the working of the dmd’s will be displayed. (menu 9-43) diagnosis i2c dmd smps lps1 lps2 lps3 voltages fanspeed select with ↑ or ↓ then to retur...

  • Page 122

    9. Service mode 9.15.6 voltages how to select the overview? 1. Push the cursor key ↑ or ↓ to highlight voltages. (menu 9-48) 2. Press enter to select. The voltage overview window will be displayed. (menu 9-49) diagnosis i2c dmd smps lps1 lps2 lps3 voltages fanspeed select with ↑ or ↓ then to return ...

  • Page 123

    10. Programmable function keys 10. Programmable function keys 10.1 function keys what can be done with these keys? The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu. How can a function key be programmed? A func...

  • Page 124

    10. Programmable function keys 120 r5976801 slm r9+ 20/10/2004.

  • Page 125

    A. Standard source set up files a. Standard source set up files a.1 table overview table overview the following standard source files are pre-programmed in the projector. Name 1 resolu- tion 2 fvert hz 3 fhor khz 4 fpix mhz 5 ptot 6 pact 7 ltot 8 lact 9 1600_48v 1600x600i 48,040 62,500 135,000 2160 ...

  • Page 126

    A. Standard source set up files name 1 resolu- tion 2 fvert hz 3 fhor khz 4 fpix mhz 5 ptot 6 pact 7 ltot 8 lact 9 inter_gr 1184x886 67,170 61,796 92,941 1504 1184 920 886 mac_2 640x480 66,667 35,000 30,240 864 640 525 480 mac_3 512x384 60,147 24,480 15,667 640 512 407 384 mac_4 560_384 60,147 24,48...

  • Page 127

    A. Standard source set up files name 1 resolu- tion 2 fvert hz 3 fhor khz 4 fpix mhz 5 ptot 6 pact 7 ltot 8 lact 9 sunxga77 1024x768 77,069 62,040 84,375 1360 1024 805 768 sup_mac 1024x768 60,000 48,780 63,999 1312 1024 813 768 svga_56v 800x600 56,250 35,156 36,000 1024 800 625 600 svga_60v 800x600 ...

  • Page 128

    A. Standard source set up files 124 r5976801 slm r9+ 20/10/2004.

  • Page 129

    B. Dust filter replacement b. Dust filter replacement w arning : switch off the projector and unplug from the wall outlet before starting the replacement proce- dure. When should it be done ? Depending on the environment, the dust filters should be replaced at least when replacing the lamp. When the...

  • Page 130

    B. Dust filter replacement image b-2 slide out front dust filter image b-3 insert front dust filter b.2 dust filter on the back side necessary tools • a flatblade screwdriver of 5 mm • allen key 5 mm how to replace ? 1. Turn on the back panel the 3 lock screw a quarter turn counter clockwise. (image...

  • Page 131

    B. Dust filter replacement image b-4 back cover removal image b-5 removing dust filter image b-6 pull out dust filter and insert new one r5976801 slm r9+ 20/10/2004 127.

  • Page 132

    B. Dust filter replacement 128 r5976801 slm r9+ 20/10/2004.

  • Page 133: C. Troubleshooting

    C. Troubleshooting c. Troubleshooting c.1 error codes overview the following table gives an overview of some important error codes displayed on the led display of the projector. Error code description caused by action 2002 lamp start failed • hot restrike • lamp with many strikes • maximum run time ...

  • Page 134

    C. Troubleshooting error code description caused by action 4111 30v too low call a qualified service engineer 4112 15v too low call a qualified service engineer 4113 12v too low call a qualified service engineer 4114 5v too low call a qualified service engineer 4115 3v3 too low call a qualified serv...

  • Page 135

    Revision sheet to: barco nv events/documentation noordlaan 5, b-8520 kuurne phone: +32 56.36.89.70, fax: +32 56.36.88.24 e-mail: antoon.Dejaegher@barco.Com, web: www.Barco.Com from: date: please correct the following points in this documentation (r5976801/01): page wrong correct r5976801 slm r9+ 20/...