Clm r10+ users manual r9050100 r90501001 r59770021/06 07/07/2008.
Barco nv events noordlaan 5, b-8520 kuurne phone: +32 56.36.89.70 fax: +32 56.36.88.24 e-mail: sales.Events@barco.Com visit us at the web: www.Barco.Com printed in belgium.
Changes barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) desc...
Liable for damage of any kind, loss of data, loss of profits, business interruption or other pecuniary loss arising directly or indirectly. Any liability of the seller will be exclusively limited to replacement of the product or refund of purchase price. Gnu-gpl code if you would like a copy of the ...
Table of contents table of contents 1. Safety ................................................................................................................. 5 1.1 general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Table of contents 8.2.2 input configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 8.3 input locking . . . . . . . . . ....
Table of contents 12.10 white peaking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123 12.11 scenergix . . . ....
Table of contents a. Dimensions ........................................................................................................ 177 a.1 dimensions of the clm r10+. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
1. Safety 1. Safety about this chapter read this chapter attentively. It contains important information to prevent personal injury while installing and using an clm r10+ projector. Furthermore, it includes several cautions to prevent damage to the clm r10+. Ensure that you understand and follow all ...
1. Safety • warning: this apparatus must be grounded (earthed) via the supplied 3 conductor ac power cable. If none of the supplied power cables are the correct one, consult your dealer. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. D...
1. Safety • mercury vapor warnings: keep the following warnings in mind when using the projector. The lamp used in the projector contains mercury. In case of a lamp rupture, explosion there will be a mercury vapor emission. In order to minimize the potential risk of inhaling mercury vapors: - ensure...
1. Safety • in the event of fire, use sand, co 2 , or dry powder fire extinguishers; never use water on an electrical fire. • this product should never be placed near or over a radiator or heat register. • this projector should not be placed in a built-in installation or enclosure unless proper vent...
1. Safety 1.4 important warnings concerning clm flight cases important warnings concerning stacking/transporting clm rental flight cases • stack maximum two (2) clm rental flight cases high. Never higher. • surface on which flight case is standing must be level to ensure that the total load is evenl...
1. Safety 10 r59770021 clm r10+ 07/07/2008.
2. General 2. General about this chapter read this chapter before installing your clm r10+. It contains important information concerning installation requirements for the clm r10+, such as minimum and maximum allowed ambient temperature, humidity conditions, required safety area around the installed...
2. General which screen type ? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applications. Screens are rated by how much light they reflect (or transmit in the case of rear projection systems) given a dete...
2. General image 2-2 5. Remove the foam rubber. Save the original shipping carton and packing material, they will be necessary if you ever have to ship your projector. For maximum protection, repack your projector as it was originally packed at the factory. A rubber foam inside a plastic bag is plac...
2. General 2.4 projector configurations the different configurations depending on the installation the projector can be mounted in different ways, the 4 different configurations are: 1. Front / table (f/t) 2. Front / ceiling (f/c) 3. Rear / table (r/t) 4. Rear / ceiling (r/c) for a ceiling mounted c...
2. General positioning the projector floor sc r e e n sc r e e n pd a cd screen sw sw sh b sh b cd image 2-5 on-axis / off-axis projection the position of the projector with reference to the screen may also be different depending on the installation. Basically the projector can be positioned in on-a...
2. General u +110% -29% -103% +17.5% d l r p f u d side view p f +110% -29% top view p f l r -103% +17.5% image 2-6 shift range p dmd f field of view it’s mechanical possible to shift outside the recommended field of view (±100% up/down and ±70% left/right), but this will result in a slightly declin...
2. General 2.5 projector air inlets and outlets air inlets and outlets image 2-8 the clm r10+ has 2 inlet channels and one air outlet. The air outlet is located at the rear of the projector. The air inlets are located at the front and top of the projector. 2.6 free download of projector toolset abou...
2. General 18 r59770021 clm r10+ 07/07/2008.
3. Physical installation 3. Physical installation about this chapter this chapter explains how to install and set up your clm projector. If you are familiar with the projector and want to quickly set it up for temporary use, follow the “quick setup” instructions below. For a more complete setup, fol...
3. Physical installation overview • rcu battery installation • rcu rugged case installation • rcu xlr adaptor installation • using the xlr adaptor of the rcu • rcu usage possibilities 3.1.1 rcu battery installation where to find the batteries for the remote control ? The batteries are not placed in ...
3. Physical installation 3.1.2 rcu rugged case installation only with optional rugged case kit which is part of the touring kit (r9861000). Necessary tools no tools. Necessary parts touring kit how to install the rugged case of the remote control ? 1. Slide the bottom of the rcu into the rugged case...
3. Physical installation s c s image 3-6 mounting the xlr adapter 2. Fasten the two screws (s) of the xlr adaptor. Turn each screw repeatedly one or two turns until both screws are tight. 3.1.4 using the xlr adaptor of the rcu how to use the xlr adaptor of the remote control unit ? 1. Connect a cabl...
3. Physical installation a b c d f g e image 3-8 3.2 lenses overview • available lenses • lens selection • lens formulas • lens formulas 3.2.1 available lenses overview first series lenses: image 3-9 r9849870: cld zoom lens (1.2 - 1.6 : 1) image 3-10 r9861100: cld zoom lens (1.6 - 2.4 : 1) image 3-1...
3. Physical installation image 3-12 r9861060: cld zoom lens (1.2–1.5 : 1) image 3-13 r9861070: cld zoom lens (1.5–2.2 : 1) image 3-14 r9861080: cld zoom lens (2.2–4.4 : 1) image 3-15 r98610890: cld zoom lens (4.4–7.0 : 1) lens order number cld 1.2 - 1.5 r9861060 cld 1.5 - 2.2 r9861070 cld 2.2 - 4.4 ...
3. Physical installation sc r e e n sw pd image 3-16 pd for lens selection 3.2.3 lens formulas formulas lens throw ratio for clm metric formulas (meter) inch formulas (inch) cld (1.2 - 1.6 : 1) 1.2 - 1.6 pd min =1.216 x sw - 0.05 pd max =1.657 x sw - 0.097 pd min =1.216 x sw - 1.97 pd max =1.657 x s...
3. Physical installation 3.3 alignment of a table mounted clm projector how to align a table mounted clm projector 1. Place the projector in the desired location. Take into account the zoom range of the used lens and the size of the screen. 2. Project one of the internal hatch patterns on the screen...
3. Physical installation a a b c image 3-19 rigging slots and clamps necessary tools open end spanner 17 mm necessary parts • four rigging clamps (r855943) • safety cable (b361213) • two snap hook locks (b361212) mounting the rigging points into the handle 1. Push the cup square neck bolt through th...
3. Physical installation x mm image 3-21 4. Slide the rigging points on there place in the slots, according the measured distance and secure this position by fastening the nut completely. Ensure that the rigging points are symmetrically lined up, so that the projector will hang in balance. If necess...
3. Physical installation image 3-24 opening clamps 7. Place the projector (upside down) under the truss installation and lower the truss until the support bars of the truss are nearby the rigging clamps on the projector. Image 3-25 mounting to truss 8. Lift up the projector and hook the four rigging...
3. Physical installation image 3-26 security cable c aution : always mount the safety cable when suspending the projector. 3.5 alignment of a ceiling mounted clm projector necessary tools spanner 17 mm how to align a ceiling mounted clm projector 1. Install the projector in the desired location. See...
3. Physical installation skew image 3-28 skew adjustment r59770021 clm r10+ 07/07/2008 31.
3. Physical installation 32 r59770021 clm r10+ 07/07/2008.
4. Stacking clm projectors 4. Stacking clm projectors stacking of clm projectors is only possible with optional touring kit. See "mounting optional carry handle", page 195 for more information. Overview • stacking clm projectors • aligning stacked clm projectors 4.1 stacking clm projectors preparati...
4. Stacking clm projectors a b c d image 4-2 close the interlocking 3. Are these projectors stacked for a ceiling mounted configuration? If yes, mount a safety cable from one side of the projector around the truss installation to the other side of the projector. Repeat this for the second projector....
4. Stacking clm projectors d c b a image 4-4 open the interlocking w arning : never open an interlocking adapter of a stacked projector which is still suspended. First place the stacked projectors on the floor. 4.2 aligning stacked clm projectors how to align two stacked clm projectors 1. Make sure ...
4. Stacking clm projectors inclination image 4-6 inclination adjustment 5. If necessary, adjust the skew of the stacked projector with respect to the reference projector by turning the screw on the right front side. Adjust until the outline of the hatch pattern is most symmetric with the reference h...
5. Connections 5. Connections about this chapter this chapter describes more in detail the power (p), the input source (s) and the communication (c) connections of the clm r10+. C s p c image 5-1 overview • power connection • input source connections • communication connections 5.1 power connection ...
5. Connections s h p image 5-2 power input 4. Connect the male side of the power cord to the local power net. Caution: ensure that the power net meets the power requirements of the projector, which are: 100-120/200-240v 12/8a 50/60hz. W arning : do not attempt operation if the ac supply and cord are...
5. Connections 100 light output % 90 70 100 110 140 input voltage v max. 3 lamps on 4 lamps on 170 264 image 5-3 5.2 input source connections general the input and communication unit is equipped with two input slots, which accept any type of input designed for the clm projector. The modularity of th...
5. Connections image 5-8 cover plate for unused input slot (r848607). Hdcp dvi input (r9854465) (image not available) the clm r10+ is standard equipped with one 5 cable input module and one dvi input module. 5.3 communication connections communication interface 1 2 3 rs232 / 422 out rs232 / 422 in u...
5. Connections i rs232/422 output port j rs232/422 input port k xlr input port for remote control l ir receiver m two digit 7-segment display for diagnostic code projector status the projector “status” led (a) lights up green while in operation. The same led lights up red when the projector is switc...
5. Connections rs232/422 input port rs232/422 output port pin description pin description 5 gnd : ground 5 gnd : ground 6 dsr : data set ready [rs232] rxd+ : received data [rs422] 6 dsr : data set ready [rs232] rxd+ : received data [rs422] 7 — (not connected) — 7 — (not connected) — 8 cts : clear to...
5. Connections 10/100 base-t — rj45 port pin description 6 rxd- 7 — 8 — usb port the communication interface is equipped with a master usb port, type “a” connector (h). This usb port will simplify the service procedures for software updates or for taking backup files from the projector without netwo...
5. Connections 44 r59770021 clm r10+ 07/07/2008.
6. Getting started 6. Getting started about this chapter this chapter describes the functions on the remote control and local keypad and gives an overview how to start up the projector. It gives also a brief overview of the direct adjustment possible with these controls. Overview • rcu & local keypa...
6. Getting started menu exit ent er pause text phase tint color brightn contr 9 0 7 8 5 6 3 4 1 2 lens lens zoom lens shift lens focus 1 22 2 3 4 5 6 7 8 9 10 11 12 13 14 17 15 16 19 20 18 l sharp n lens shift 21 1 2 3 4 5 6 7 8 9 0 menu exit enter rgb stby pause text pattern window pip lens rigging...
6. Getting started ind. Key name description 15 freez to freeze the actual projected image. 16 text toggle key to activate or deactivate on screen text boxes while adjusting a setting. When adjusting one of the image controls, e.G.During a meeting, the normally displayed bar scale can be deactivated...
6. Getting started menu exit enter pause text phase tint color brightn contr 9 0 7 8 5 6 3 4 1 2 lens lens zoom lens shift lens focus l sharpn lens shift 1 2 3 4 5 6 7 8 9 0 menu exit enter rgb stby pause text pattern window pip lens rigging auto a b image 6-3 stand by indication a stand by indicati...
6. Getting started all custom settings are written to the internal backup device. A message ’save data ...’ indicates this process. Never switch off the projector while this message is displayed. 6.3.4 switching off how to switch off the projector? 1. Press first standby. 2. Let cool down the projec...
6. Getting started f1f2f3f4f5 a d j e x it e n t e r p a u sepha se t e x t s h a r p n t in t c o l o r b r ig h t n c o n t r t r e b l eb a l a n c e b a s sv o l 9 0 7 8 5 6 3 4 1 2 f1 f2 f3 f4 f5 a dj e x i t e n t e r p a use phase t e xt sharpn t i nt co l o r br i g ht n co nt r t r eb l e b...
6. Getting started 3. When finished, press exit key to return or enter to continue to the shift adjustment. Press the lens key to switch to another pattern. Different patterns are available. Quick shift adjustment 1. Press the lens key on the remote control or local keypad. The zoom/focus menu will ...
6. Getting started d horizontal shift 2. Press lens focus button [-] or [+] (c) for an overall focus of the image. 3. Press ▲ lens shift ▼ button for correct vertical position of the image on the screen. 4. Press ◄ lens shift ► button for correct horizontal position of the image on the screen. 6.5.3...
6. Getting started 6.6 use of the auto button what is possible? The auto button can be configured as an auto align of the projected source or as an auto image button which calls a choice menu. Within this choice menu, the user can execute an auto align of the image, an auto contrast/brightness and a...
6. Getting started the led on the remote control must lit up while pressing a digit key. Otherwise the address is not entered in the remote control. 6.7.2 controlling the projector projector address address installed in the projector to be individually controlled. Common address projector will alway...
6. Getting started once the desired window is activated (main window or picture in picture window) all keys on the remote control or local keypad can now control that selected window. To select the source for the picture in picture window, press window button until pip window is activated and then s...
6. Getting started 56 r59770021 clm r10+ 07/07/2008.
7. Start up of the adjustment mode 7. Start up of the adjustment mode overview • about the adjustment mode • about the use of the remote control and the local keypad • start up the adjustment mode • navigation and adjustments • on screen menus versus lcd display menus 7.1 about the adjustment mode o...
7. Start up of the adjustment mode the main menu of the adjustment mode opens. Image 7-1 7.4 navigation and adjustments how to navigate in the menu structure? Once in the menu structure, use the ▲ or ▼ keys on the remote control (or the ▲ or ▼ (+ or -) key on the local keypad) to scroll through the ...
7. Start up of the adjustment mode when quitting the menu structure, the backlighting of the lcd panel is switched off after a few seconds. R59770021 clm r10+ 07/07/2008 59.
7. Start up of the adjustment mode 60 r59770021 clm r10+ 07/07/2008.
8. Input menu 8. Input menu overview • overview flow • slot module type • input locking • minimum delay • native resolution • source switching • no signal 8.1 overview flow overview level 1 level 2 level 3 input slot module type 5-cable hd-sdi - sdi dvi dvi hdcp input locking none automatic input 1 ...
8. Input menu c aution : always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro- jector. 8.2.2 input configuration how to change? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select input and press enter. The input menu is displayed. 3. Use...
8. Input menu input module indication description rgb cv rgb input with composite video as sync signal rgb sog rgb input with sync on green yuv hs/vs - cs component video with separate horizontal and vertical sync or separate composite sync. Yuv cv component video with composite video as sync signal...
8. Input menu image 8-6 image 8-7 image 8-8 when: free run output is locked on an internal sync (60 hz) automatic output is locked on the selected input for the main window input 1 output is locked on source 1 input 2 output is locked on source 2 the options menu changes depending on the selection. ...
8. Input menu genlock off (default position) locking done on input source of main window, when automatic was selected or on the selected input source when a specific input was selected. Projector detects automatically the vertical frequency and clock frequency of the input signal. A slightly differe...
8. Input menu image 8-13 when the show native resolution function is in the on position, the projector handles the source as follows: source projected image name ratio resolution ratio resolution xga 4:3 1024x768 4:3 1024x768 image projected with black borders sxga 5:4 1280x1024 5:4 1280x1024 image ...
8. Input menu 8.6 source switching switching from one source to another to minimize undesired effects when switching from one source to another one can use the seamless switching mode, using the fade effect. Image 8-16 example of fade effect switching mode set up 1. Press menu to activate the menus....
8. Input menu 2. Use the ▲ or ▼ key to select input and press enter. The input menu is displayed. 3. Use the ▲ or ▼ key to select no signal and press enter to toggle between [black] and [blue]. Image 8-20 image 8-21 image 8-22 8.7.2 shutdown setting how to change the shutdown setting 1. Press menu t...
8. Input menu or, enter the desired value with the keyboard. When trying to exceed the maximum allowed value, the system will set it back to the maximum value. Image 8-26 image 8-27 image 8-28 r59770021 clm r10+ 07/07/2008 69.
8. Input menu 70 r59770021 clm r10+ 07/07/2008.
9. Image menu 9. Image menu overview • overview flow • how to select the image adjustments? • image settings • aspect ratio • timings • image files services • save custom settings 9.1 overview flow overview level 1 level 2 level 3 level 4 image image settings contrast brightness saturation tint phas...
9. Image menu level 1 level 2 level 3 level 4 vertical start advanced settings clamp delay clamp width field polarity film mode detection image file services manual load delete delete all rename copy options load file save custom settings 9.2 how to select the image adjustments? Start up 1. Use the ...
9. Image menu 9.3.1 contrast about contrast the contrast function is used to adjust the contrast between the light and dark areas of the displayed image. How to change the contrast? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to s...
9. Image menu the higher the value, the higher the brightness. Image 9-7 image 9-8 image 9-9 image 9-10 9.3.3 saturation about (color) saturation the color function is used to adjust the color saturation levels. How to change the saturation? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key...
9. Image menu 9.3.4 tint (hue) about tint the tint function is used to adjust color hue to obtain true color reproduction and is only active for video and s-video when the ntsc color system is used. For pal and secam sources, tint is not accessible. How to change the saturation? 1. Press menu to act...
9. Image menu how to change the phase? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select image settings and press enter. 4. Use the ▲ or ▼ key to select phase and press enter. The phase progress bar appears. 5. Use ◄ or ► to c...
9. Image menu image 9-24 image 9-25 image 9-26 image 9-27 9.3.7 noise reduction about noise reduction reduces noise and pixel jitter in all video sources. How to change? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select image ...
9. Image menu 9.3.8 color temperature what can be done ? The color temperature can be selected according to the type of source: there are 5 different preset color temperatures: • projector white • computer : 9300 k • video : 6500 k • film : 5400 k • broadcast : 3200 k these calibrated presets can be...
9. Image menu image 9-35 9.3.8.2 set a custom color temperature how to enter a custom value? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select image settings and press enter. 4. Use the ▲ or ▼ key to select color temperature a...
9. Image menu 9.3.9 input balance overview • introduction to input balance • adjusting the input balance 9.3.9.1 introduction to input balance introduction: unbalanced color signals when transporting signals, there is always a risk of deterioration of the information contained in the signals. In cas...
9. Image menu one can conclude here that a good data conversion can only be met by using three previously (input) balanced color signals the objective of input balancing the objective in input balancing is to “set” the same black level and the same white level for the three colors of a particular in...
9. Image menu an alternative to a full screen white/black pattern is the standard gray scale pattern, the white bar will be used for white balance and the black bar for black balance. Image 9-45 black balance 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter....
9. Image menu if one uses a gray scale pattern, the bright spots should appear in the black bar. Performing white input balance 1. Connect the source you want to project. 2. Select a white pattern (or gray scale as alternative). 3. Press menu to activate the menus. 4. Use the ▲ or ▼ key to select im...
9. Image menu aspect ratio description 16:9 wide screen television format / anamorphic format 5:4 workstation format 2.35 film format 1.88 1.78 wide screen television format / anamorphic format custom any custom format can be set up type of input signal is indicated above each image row. The image r...
9. Image menu image 9-57 image 9-58 image 9-59 how to set up a custom aspect ratio? 1. Select first custom and press enter to activate. The custom aspect ratio dialog box opens. 2. Use the ▲ or ▼ key to adjust the vertical size of the image. Use the or key to adjust the horizontal size of the image....
9. Image menu the timings menu will be displayed. Image 9-62 image 9-63 image 9-64 4. To change a setting, use the ▲ or ▼ key to select and press enter. The corresponding adjustment box is displayed. E.G. Horizontal total pixels. Image 9-65 5. Use the ▲ or ▼ key (or ◄ or ► key) to change the value. ...
9. Image menu how to change the clamp delay - clamp width? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select timings and press enter. 4. Use the ▲ or ▼ key to select advanced settings and press enter. The advanced settings men...
9. Image menu image 9-71 image 9-72 image 9-73 image 9-74 9.5.3 advanced settings, film mode detection about film mode detection this mode detects whether film or video is displayed. When enabled, the hardware looks for tell-tale signs of 3:2 or 2:2 pull-down sequences. These are the result of conve...
9. Image menu how to set up 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select advanced settings and press enter. The advanced settings menu is displayed. 4. Use the ▲ or ▼ key to select film mode and press enter to toggle betw...
9. Image menu image 9-79 image 9-80 image 9-81 image 9-82 9.6 image files services overview • files and file manipulations • manual load file • delete file • delete all custom files • rename a file • copy a file • file options 9.6.1 files and file manipulations connecting a new source. Before using ...
9. Image menu 9.6.2 manual load file how to load? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select file services and press enter. The file service menu is displayed. 4. Use the ▲ or ▼ key to select manual load and press enter...
9. Image menu the delete window opens. 5. Use the ▲ or ▼ key to select the file which must be deleted. Note: only custom files can be deleted. 6. Press enter to delete the selected file. Image 9-87 image 9-88 image 9-89 image 9-90 no recovery possible ! 9.6.4 delete all custom files how to delete? 1...
9. Image menu image 9-91 image 9-92 image 9-93 image 9-94 or, if you are not sure to delete all custom files, select no and press enter to activate the selection. 9.6.5 rename a file how to rename? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the...
9. Image menu image 9-98 image 9-99 9.6.6 copy a file how to copy? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select file services and press enter. The file service menu is displayed. 4. Use the ▲ or ▼ key to select copy and p...
9. Image menu 2. Use the ▲ or ▼ key to select image and press enter. 3. Use the ▲ or ▼ key to select image services and press enter. The image service menu is displayed. 4. Use the ▲ or ▼ key to select options and press enter. Image 9-105 image 9-106 image 9-107 the options window opens. 5. Use the ...
9. Image menu 96 r59770021 clm r10+ 07/07/2008.
10. Layout menu 10. Layout menu overview • overview flow • main window • pip window • layout file services 10.1 overview flow overview level 1 level 2 level 3 level 4 layout main window size position pip window pip window [on/off] size position layout file services load main full screen pip top righ...
10. Layout menu the first character is highlighted. Use the ▲ or ▼ key to select the desired character and press or key to select the next character in the name. Press exit to return. The new file is generated. 10.2.1 size adjustment what can be done? The size of the main window can be adjusted unti...
10. Layout menu 5. Toggle with enter till lock is set to [x]. Image 10-7 [ ] = no lock between height and width. [x] = width and height are locked. 6. Use or▲ ▼ to adjust the size with respect to the original aspect ratio. When the desired size is reached, press exit. A save window opens. Image 10-8...
10. Layout menu image 10-12 [ ] = no lock between height and width. [x] = width and height are locked. 6. Use the ▲ or ▼ key to adjust the height. Use the ◄ or ► key to adjust the width. When the desired size is reached, press exit. A save window opens. Image 10-13 7. Select with the ▲ or ▼ key yes ...
10. Layout menu use the ◄ or ► key to adjust left start point. When the desired size is reached, press exit. A save window opens. Image 10-15 image 10-16 image 10-17 image 10-18 image 10-19 6. Select with the ▲ or ▼ key save and press enter. Select with the ▲ or ▼ key delete, when no save is desired...
10. Layout menu image 10-20 position of pip a top position b left position 10.3.2 picture in picture activation how to activate pip? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select layout and press enter. 3. Use the ▲ or ▼ key to select pip window and press enter. The pip window...
10. Layout menu image 10-24 size pip window a width pip window b height pip window the size of the picture in picture window can be changed with respect to the original aspect ratio of the pip image. Remark: when e.G. The pip window is a 4 by 3 window and the projected image has a 16 by 9 format, th...
10. Layout menu image 10-29 [ ] = no lock between height and width. [x] = width and height are locked. 6. Use the ▲ ▼ or ◄ ►key to adjust the size with respect to the aspect ratio. When the desired size is reached, press exit. A save window opens. Image 10-30 7. Select with the ▲ or ▼ key yes and pr...
10. Layout menu image 10-34 [ ] = no lock between height and width. [x] = width and height are locked. 6. Use the ▲ or ▼ key to adjust the height. Use the ◄ or ► key to adjust the width. When the desired size is reached, press exit. A save window opens. Image 10-35 7. Select with the ▲ or ▼ key yes ...
10. Layout menu image 10-36 image 10-37 image 10-38 image 10-39 image 10-40 6. Select with the ▲ or ▼ key yes and press enter. Select with the ▲ or ▼ key no, when no save is desired and press enter. 10.4 layout file services overview • load layout • rename a layout • delete a layout • copy / save as...
10. Layout menu the load layout window opens. Image 10-41 image 10-42 image 10-43 image 10-44 5. Use the ▲ or ▼ key to select the desired layout and press enter to select. The first 3 layouts are default layouts, all others are customer created layouts. The menu shows only the first 10 layouts, but ...
10. Layout menu image 10-45 image 10-46 image 10-47 image 10-48 10.4.3 delete a layout what is possible? Custom created layouts can be removed from the projector memory. How to delete? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select window and press enter. 3. Use the ▲ or ▼ key ...
10. Layout menu image 10-52 the first 3 layouts are default layouts and cannot be delete. 5. Use the ▲ or ▼ key to select the layout that must be deleted. 6. Press enter to finalize the delete operation. 10.4.4 copy / save as a layout what is possible, an existing layout, system layout or custom cre...
10. Layout menu image 10-56 110 r59770021 clm r10+ 07/07/2008.
11. Lamp menu 11. Lamp menu overview • overview flow • lamp power mode • lamp power • lamp identification • status and run time overview lamps • lamp mode 11.1 overview flow overview level 1 level 2 level 3 level 4 lamp power mode normal economic power (reduction) identification serial number articl...
11. Lamp menu how to switch? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select lamp and press enter. 3. Use the ▲ or ▼ key to select power and press enter. 4. Use the ▲ or ▼ key to select mode. 5. Press enter to toggle between [normal], [economic], [normal high altitude] and [eco ...
11. Lamp menu image 11-7 11.4 lamp identification about the lamp identification menu gives an overview of the most important parameters of the used lamps. It starts with the first lamp. Scrolling to other lamps is possible with the cursor keys. These parameters are: • serial number lamp • article nu...
11. Lamp menu the status and the run time for each lamp are displayed. Image 11-11 image 11-12 image 11-13 11.6 lamp mode what can be done? The projector is equipped with 4 identical lamps. Depending on the main voltage, the lamp selection mode menu will show 4 lamps, 3 lamps, 2 lamps or a single la...
12. Alignment menu 12. Alignment menu about this chapter this chapter describes the alignment of the projector once the physical installation is finished. Via the software, the image will be perfectly aligned on the screen. Overview • overview flow • orientation • lens adjustment • side keystone • b...
12. Alignment menu level 1 level 2 level 3 full screen green full screen red full screen white hatch outline color space projector ebu smpte custom white peaking scenergix status top bottom left right show pattern black level 12.2 orientation what can be done? The way of physical installation of the...
12. Alignment menu for more information about the physical installation, see chapter “general”, “projector configurations”. 12.3 lens adjustment quick way to enter the lens adjustment setting; press the lens button on the local keypad or the remote control. Access to the lens adjustments 1. Press me...
12. Alignment menu image 12-9 image 12-10 2. Use the ▲ or ▼ key to shift the lens upwards or downwards. Use the ◄ or ► key to shift the lens to the left or to the right. 12.4 side keystone what can be done? The side keystone adjustment is used to align the image if the projector is mounted at a non ...
12. Alignment menu 12.5 blanking what can be done ? Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwanted information (or noise). A ’0’ on the bar scale indicates no blanking. Which blanking adju...
12. Alignment menu image 12-16 image 12-17 image 12-18 12.6 intensity what can be done the light in the optical light path can be dimmed with a mechanical shutter plate. This way of light dimming will enhance the contrast of the image. Optical light dimming can reduce the light more than the lamp po...
12. Alignment menu 3. Use the ▲ or ▼ key to select gamma and press enter. The gamma progress bar appears. 4. Use ◄ or ► key to change the gamma setting and press exit. Gamma can be set to one of the 8 available steps. Image 12-22 image 12-23 image 12-24 12.8 internal pattern what can be done with th...
12. Alignment menu the selected pattern is displayed. The following patterns are available: - checker board - color bars - focus - full screen black - full screen blue - full screen green - full screen red - full screen white - hatch - outline - scenergix 12.9 color space color space a color space o...
12. Alignment menu image 12-31 when selecting a fixed color space, the values of this selected color space overwrite the custom selected color space. 12.10 white peaking about white peak and brilliant color in video centric applications true color reproduction is generally a priority over brightness...
12. Alignment menu 12.11 scenergix overview • introduction • preparations • scenergix activation • scenergix pattern • scenergix overlap zone (horizontal scenergix) • scenergix overlap zone (vertical scenergix) • scenergix size adjustment • adjusting the black level of the images 12.11.1 introductio...
12. Alignment menu 12.11.2 preparations scenergix preparations to ensure proper scenergix adjustment, be sure that the following adjustments are done perfectly on all projectors: • convergence • geometry • color matching (color temperature, color standard, input balance, gamma) 12.11.3 scenergix act...
12. Alignment menu 2. To remove the internal pattern, use the ▲ or ▼ key to select hide pattern and press enter. Image 12-42 12.11.5 scenergix overlap zone (horizontal scenergix) definitions image 12-43 scenergix set up overlap : number of pixels that overlap horizontal resolution of 1 projector tot...
12. Alignment menu image 12-44 image 12-45 image 12-46 image 12-47 how to set for the second projector 1. Go to layout → main window → size 2. Enter the value for the width as follow: total horizontal screen resolution / 2 - 0.5 x overlap zone. 3. Position = original start + horizontal width of proj...
12. Alignment menu 12.11.6 scenergix overlap zone (vertical scenergix) definitions image 12-53 scenergix overlap zone vertical overlap : number of pixels that overlap vertical resolution of 1 projector total vertical screen resolution : [(vertical resolution of 1 projector) x 2] minus (overlap) vert...
12. Alignment menu how to set for the second projector 1. Go to layout → main window → size 2. Enter the value for the width as follow: total vertical screen resolution / 2 - 0.5 x overlap zone. 3. Position = original start + vertical height projector 1 - overlap zone image 12-58 image 12-59 image 1...
12. Alignment menu image 12-63 image 12-64 image 12-65 a pattern with the different areas is displayed. Image 12-66 width selections 5. Use the cursor keys to move the border of the overlap area to the desired position (value between 0 and 255). Set first the width for the first projector and repeat...
12. Alignment menu image 12-67 width set up for projector 1 image 12-68 width set up for projector 2 12.11.8 adjusting the black level of the images why black level adjustment for dark images, the overlap zone will be brighter then the rest of the images. Therefore we can rise the black level of the...
12. Alignment menu image 12-69 image 12-70 image 12-71 5. Adjust the black level of area a until the black level of area a, b and c are equal. A c b 12 13 11 r g b rgb image 1 image 2 image 12-72 black level adjustment use the reset function to bring all scenergix settings back to zero. 132 r5977002...
13. Projector control 13. Projector control about this chapter this chapter explains the setup of the control part of the software such as projector address and all types of communication with the external world. Overview • overview flow • projector address • serial communication • network • ir cont...
13. Projector control level 1 level 2 level 3 bar scale [bottom] local lcd contrast 13.2 projector address overview • individual projector address • common address 13.2.1 individual projector address about individual projector address before a projector, and only this projector, can be controlled vi...
13. Projector control 13.2.2 common address about common address a common address can be ’0’ or ’1’. Any command coming from a remote control programmed with that common address will be executed. How to change the common address? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select p...
13. Projector control 4. Use the ▲ or ▼ key to select baudrate and press enter to toggle between the available baud rates. The following baud rates can be selected: - 9600 - 19200 - 38400 - 57600 - 115200 5. Press exit to return. Image 13-9 image 13-10 image 13-11 13.3.2 interface standard what can ...
13. Projector control 3. Use the ▲ or ▼ key to select serial communication and press enter. The serial communication menu opens. 4. Use the ▲ or ▼ key to select rs422 termination and press enter to toggle between [on] or [off]. Default: [on] image 13-15 image 13-16 image 13-17 13.4 network overview ...
13. Projector control what should be set up for an ethernet address? 2 ways can be used to assign an address: • use the dhcp setting so that an automatic address will be assigned. • assign manually an ip address, net-mask (subnet-mask), (default) gateway address. - set the ip-address field to the de...
13. Projector control image 13-21 image 13-22 image 13-23 image 13-24 13.4.4 subnet-mask set up how to set up? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select projector control and press enter. 3. Use the ▲ or ▼ key to select network and press enter. The ethernet menu opens. 4. ...
13. Projector control 13.4.5 default gateway set up how to set up? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select projector control and press enter. 3. Use the ▲ or ▼ key to select network and press enter. The ethernet menu opens. 4. Use the ▲ or ▼ key to select default gateway...
13. Projector control image 13-33 image 13-34 image 13-35 activation key 1. Use the ▲ or ▼ key to select activation key and press enter. The activation key window opens. The first digit is selected. 2. Enter a new value with the digit buttons. The next digit is selected. Or use ◄ or ► key to select ...
13. Projector control image 13-38 image 13-39 image 13-40 image 13-41 13.6.2 dmx monitor what can be done? If a dmx device is connected, the settings per channel can be displayed in an on screen menu. How to start up the monitoring 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select...
13. Projector control image 13-45 image 13-46 when selecting dmx monitor and no dmx device is connected, the message “no dmx data, check connection to display channels” appears on the screen. When enter is pressed the same window appears as dmx monitor but without values. About motor control (channe...
13. Projector control 13.6.3 dmx mode what can be done ? 2 modes for dmx are available: • normal mode which has currently 10 channels implemented. • simple mode which has currently only 1 channel implemented. Depending on the dmx application the correct mode has to be selected. For the complete dmx ...
13. Projector control image 13-50 image 13-51 image 13-52 13.7.2 shortcut keys what can be done? An overview of the shortcut allocations with the corresponding menu is given. Those printed in bold are allocated. The allocated shortcut keys can be cleared within this menu. How to clear a shortcut key...
13. Projector control 13.8 menu position what is possible? The on screen menu and the bar scale can be positioned on different places on the screen. Both can be positioned : • center • top • bottom how to change the position? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select proje...
13. Projector control 13.10 language selection what can be done? The user can change the language of the on screen menus and the local display menus to one of the available languages. The following languages are available: • english • french • german • spanish • italian all available languages are i...
13. Projector control 148 r59770021 clm r10+ 07/07/2008.
14. Service menu 14. Service menu about this chapter this chapter refers to the service menu in which the owner can find valuable information when calling the barco help desk. Overview • overview flow • identification • diagnosis • internal service patterns • restore factory defaults • save custom s...
14. Service menu the following items will be displayed: • projector address • type of projector • package • configuration • baud rate • ip address • mac address • text • serial number of projector: this number can be useful when calling for technical assistance. • runtime • lamp runtime • customer i...
14. Service menu 14.3 diagnosis what can be seen? The diagnosis menu gives the possibility to get an overview of the working of the projector. 14.3.1 how to start up the diagnosis? Start up 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select service and press enter. The service wind...
14. Service menu image 14-11 use the ▲ or ▼ item in the menu to select the previous or next page with information. 14.3.3 voltages how to display an overview? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select service and press enter. The service window opens. 3. Use the ▲ or ▼ key...
14. Service menu 14.3.4 i²c diagnosis how to select? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select service and press enter. The service window opens. 3. Use the ▲ or ▼ key to select diagnosis and press enter. The diagnosis screen is displayed. 4. Use the ▲ or ▼ key to select i...
14. Service menu image 14-20 image 14-21 image 14-22 image 14-23 use the ▲ or ▼ item in the menu to select the previous or next page with information. 14.3.6 fan speeds overview how to get an overview? 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select service and press enter. The ...
14. Service menu image 14-27 use the ▲ or ▼ item in the menu to select the previous or next page with information. 14.3.7 spi how to get an overview 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select service and press enter. The service window opens. 3. Use the ▲ or ▼ key to select...
14. Service menu 3. Use the ▲ or ▼ key to select diagnosis and press enter. The diagnosis screen will be displayed. 4. Use the ▲ or ▼ key to select error logging and press enter. The error logging overview menu is displayed. For more explanation about the stored error message, see "error codes", pag...
14. Service menu the service window opens. 3. Use the ▲ or ▼ key to select restore factory defaults and press enter. The factory defaults confirmation window opens. 4. Use the ▲ or ▼ key to select yes or no and press enter. If you are sure to restore the factory defaults and to erase the custom sett...
14. Service menu what can be done? When all preparations are taken, the refill mode will automatically activate the refill process. How to start the refill mode 1. Press menu to activate the menus. 2. Use the ▲ or ▼ key to select service and press enter. The service window opens. 3. Use the ▲ or ▼ k...
14. Service menu • gamma • color standard • source switching • effect settings • menu position • button settngs • locking settings saving custom settings 1. Connect a fat 16 formatted usb device to the usb port. 2. Press menu to activate the menus. 3. Use the ▲ or ▼ key to select service and press e...
14. Service menu image 14-49 image 14-50 image 14-51 14.9 over temperature dmd safety what can be done when the temperature of the dmd becomes higher than the normal operation temperature (between 60 and 64 °c) it is possible to switch the lamp mode of the projector automatically from 4 lamps to 2 l...
15. Maintenance 15. Maintenance about this chapter this chapter contains detailed maintenance procedures like lens cleaning, etc. These procedures can easily be performed by the operator of the projector. Overview • cleaning the lens • cleaning the exterior of the projector 15.1 cleaning the lens to...
15. Maintenance 162 r59770021 clm r10+ 07/07/2008.
16. Servicing 16. Servicing about this chapter this chapter contains general servicing procedures like lamp replacement, input unit replacement etc. Note that some of these procedures may only be performed by qualified technical service personnel. These procedure are marked with a warning. Extra ser...
16. Servicing a b image 16-1 filter top replacement 4. Insert a new hepa filter first with the side next to the lamp housing and pull down the other side to lock the filter. 5. Reinstall the lamp door, see "installation of the lamp door", page 176. C aution : never install a used hepa filter. Always...
16. Servicing a b c image 16-2 front filter replacement 4. Insert a new hepa filter by pulling the spring clamp away and insert the filter into its position. Release the spring clamp. 5. Reinstall the front cover of the projector, see "installation of the front cover", page 175. C aution : never ins...
16. Servicing b c a image 16-3 mounting the lens 4. Insert the lens in such a way that the female jack (c) is in front of the male jack (upper left corner) (b) and ensure the lens touches the front plate of the lens holder. Caution: do not release the lens yet, as the lens may fall out of the lens h...
16. Servicing a image 16-5 slide out lens 16.5 removal of a lamp unit w arning : this procedure may only be performed by qualified technical service personnel. C aution : never attempt to disassemble the lamp from its housing or to dispose of it. Due to its high internal pressure, the lamp may explo...
16. Servicing mercury vapor warnings: the lamp used in the projector contains mercury. In case of a lamp rupture, explosion there will be a mercury vapor emission. In order to minimize the potential risk of inhaling mercury vapors: • ensure the projector is installed only in ventilated rooms. • repl...
16. Servicing image 16-9 take out the lamp for recycling guidelines of the lamp, see "recycling guidelines", page 8. 16.6 mounting a new lamp unit about the lamp units all four lamp units are equal. A spare lamp can be inserted in any position without problems. See spare part list for the order numb...
16. Servicing image 16-10 lamp insertion 2. Rotate the fixation handle and close it. Push till it clicks. 3. Insert the cable connector into lamp unit socket. 16.7 removal of an input module necessary tools phillips screw driver ph1 how to remove an input module 1. Switch off the projector and unplu...
16. Servicing c aution : ensure that an unused slot is always covered with a dummy front plate. Immediately install after removing an input module a new input module or a dummy front cover. 16.8 inserting an input module necessary tools phillips screw driver ph1 how to insert an input module 1. Ensu...
16. Servicing 172 r59770021 clm r10+ 07/07/2008.
17. Projector covers, removal and installation 17. Projector covers, removal and installation overview • removal of the front cover • removal of the lamp door • installation of the front cover • installation of the lamp door w arning : the cover removal procedures may only be performed by qualified ...
17. Projector covers, removal and installation b c image 17-2 remove the front cover 17.2 removal of the lamp door w arning : this procedure may only be performed by qualified technical service personnel. Necessary tools flat screwdriver how to remove the lamp door 1. Release the captive screw at th...
17. Projector covers, removal and installation image 17-4 remove lamp door 17.3 installation of the front cover front cover can only be installed after that the side covers and top cover are installed. Necessary tools flat screwdriver how to install the front cover 1. Insert the top of the front cov...
17. Projector covers, removal and installation c image 17-6 secure front cover 17.4 installation of the lamp door lamp door can only be installed when the top cover is installed. Necessary tools flat screwdriver how to install the lamp door 1. Place the lamp door with its pins (b) on its sockets (a)...
A. Dimensions a. Dimensions overview • dimensions of the clm r10+ a.1 dimensions of the clm r10+ dimensions without carry handle 691.18 44 2. 03 29 3. 26 image a-1 dimensions r59770021 clm r10+ 07/07/2008 177.
A. Dimensions dimensions with optional carry handle 392. 55 515 257. 5 257. 5 775 532 145.5 97.5 305 105 105 image a-2 178 r59770021 clm r10+ 07/07/2008.
B. Standard source files b. Standard source files b.1 table overview table overview the following standard image files are pre-programmed in the projector. Name 1 fvert hz 2 fhor khz 3 fpix mhz 4 ptot 5 pact 6 ltot 7 lact 8 640x350@85 85,079 37,860 31,500 832 640 445 350 640x400@85 85,079 37,860 31,...
B. Standard source files name 1 fvert hz 2 fhor khz 3 fpix mhz 4 ptot 5 pact 6 ltot 7 lact 8 1400x1050rb@60 59,946 64,742 100,997 1560 1400 1080 1050 1600x1200@60 60,001 75,002 162,004 2160 1600 1250 1200 1600x1200@65 64,998 81,248 175,496 2160 1600 1250 1200 1600x1200@70 69,997 87,497 188,993 2160 ...
C. Dmx chart c. Dmx chart overview • clm control channel mapping mode 1 • clm control channel mapping (simple mode) c.1 clm control channel mapping mode 1 overview chan- nel function type range default action comments 1 intensity xfade0 - 255 0 - 100% 2 brightness xfade0 - 255 128 0 - 100% the value...
C. Dmx chart chan- nel function type range default action comments 0 - 31 stop 31 - 63 run 64 - 95 future assignment same as stop 96 - 127 future assignment same as stop 128 - 159 future assignment same as stop 160 - 191 future assignment same as stop 192 - 223 future assignment same as stop 7 motor...
D. Specifications d. Specifications overview • specifications clm r10+ • specifications clm 5 cable input (multi purpose) • specifications clm hdsdi – sdi input • specifications clm dvi input • specifications clm dvi hdcp input d.1 specifications clm r10+ overview light output 9 500 ansi lumen 10 00...
D. Specifications brightness uniformity > 85% display 1 chip dlp sxga+ (resolution of 1400 x 1050 pixels (aspect ratio 4:3)) features • dmx512 control of optical dimming, electronic dimming, zoom, focus, lens shift, input select • advanced picture-in-picture • seamless switching with effects • riggi...
D. Specifications input signal r / p r g / y / video b / p b h / s v / c r rgsb r gs sync on green b — — composite video — video — — — super video — y luma — — c chroma component video - ss p r / (r - y) y p b / (b - y) s composite sync or video as sync — component video - soy p r / (r - y) ys p b /...
D. Specifications specifications • sd smpte 259m-c and hd smpte 292m input data • 2 inputs (bnc), 1 active loop-through output (bnc) of selected input • automatic selection of active input with manual override • 10 bit digital output • diagnostic led’s on front panel: - green led: lights up in case ...
D. Specifications d.5 specifications clm dvi hdcp input input front view sync ok sel hdcp dvi input image d-4 specifications • dvi type: dvi-i (dvi-integrated), but the analog signals are not supported. Single-link configuration. • supports uxga resolution (1600 x 1200) (output pixel rates up to 165...
D. Specifications 188 r59770021 clm r10+ 07/07/2008.
E. Troubleshooting e. Troubleshooting e.1 error codes overview when the error code is preceded by a ’-’ sign, then the error means a real error for the projector. When the error code is preceded by a ’+’ sign, then the error code means a warning. The projector does not fail yet, but take care for th...
E. Troubleshooting error code description error warning caused by action 1693 1692 1691 1694 formatter pwggood yes - formatter ’power good’ signal not ok call a qualified service engineer 1999 max7301 not initialized yes 2000 no lps detected yes - no communication with lamp power supply call a quali...
E. Troubleshooting error code description error warning caused by action 7992 lps1 temp high yes yes high temperature on lps1 check if air slots are free, clean air filters. If problem persists, call a qualified service engineer. 7990 lps2 temp high yes yes high temperature on lps2 check if air slot...
E. Troubleshooting error code description error warning caused by action 7912 fan lps a low yes yes fan is running too slow or not at all if problem persists, call a qualified service engineer 7911 fan lps a high - yes 7910 fan lps b low yes yes fan is running too slow or not at all if problem persi...
E. Troubleshooting error code description error warning caused by action 7878 over temp yes yes extreme overheading of dmd or lamps if problem persists, call a qualified service engineer 7877 under temp dmd too cold warm up the projector 7876 smps input range supplied voltage is out of range check s...
E. Troubleshooting error code description error warning caused by action 7851 lamp 4 run time max exceeded - yes the maximum run time for the lamp is exceeded replace the lamp with a new one. Call a qualified service engineer 7850 lamp 4 run time shtdwn exceeded - yes 7600 color wheel not spinning y...
F. Mounting optional carry handle f. Mounting optional carry handle about this chapter this chapter describes the procedures to mount the optional carry handle to clm projector. When this optional carry handle is mounted, the projector can be suspended with the rigging clamps and stacking of project...
F. Mounting optional carry handle a a a b b c image f-2 mounting the stacking points 2. Place a stacking point (a) in each hole. 3. For the front stacking points, turn in for each a long bolt (b). For the back stacking point, turn in a short bolt (c). Image f-3 stacking points mounted f.2 preparing ...
F. Mounting optional carry handle image f-4 remove stacking point construction f.3 preparing the projector c aution : before turning the projector upside down, be sure the stacking points on the top cover are mounted. What has to be done? Before the carry handle can be mounted, the projector feet mu...
F. Mounting optional carry handle image f-5 3. Insert next to the removed back foot the extra support point. 4. Place a washer on it and insert a bolt. Secure the bolt. Due to its construction, the support is still a bit movable. Image f-6 insert extra foot 5. Insert the small ring into the hole of ...
F. Mounting optional carry handle a b b b a b b b c image f-7 carry handle mounting note: if both front holes are not completely free, turn on the skew adjustment (c) at the right side of the carry handle until the holes are free. 4. Place the removed stacking point construction back on its place an...
F. Mounting optional carry handle image f-8 mounting stacking foot 200 r59770021 clm r10+ 07/07/2008.
G. Order info g. Order info g.1 spare part order info order info: order info description r9854430 5 cable input module r9854450 hdsdi - sdi input module r9854460 dvi input module r848607 cover plate for unused input slot r98610206 clm dust filter kit, 6 pack r986102012 clm dust filter kit, 12 pack r...
G. Order info 202 r59770021 clm r10+ 07/07/2008.
Glossary glossary 2:2 pull-down the process of transferring 24-frames/sec film format into video by repeating each frame (used for pal dvd’s) as two video fields. ( ad ) 3:2 pull-down method used to map the 24 fps of film onto the 30 fps (60 fields) or 25 fps (50 fields), so that one film frame occu...
Glossary mac address media access control address. Unique hardware number, used in combination with the ip-address to connect to the network (lan or wan). Pip pip stands for "picture in picture" and allows to display multiple windows containing each of them an image. The windows may be of the video ...
Index index a address 53 program 53 rcu 53 adjustment 50–52 quick set up 50–52 lens 50 lens functions 51 lens key 50 pip 52 adjustment mode 57–58 about 57 lcd display menus 58 local keypad 57 navigation 58 on screen menus 58 rcu 57 start up 57 alignment 115–126, 128–129, 131, 133 blanking 119 color ...
Index general 11–14, 17 air inlets 17 air outlets 17 box content 13 download plug-in 17 download projector toolset 17 projector configurations 14 unpacking 12 getting started 45, 47, 50, 53–54 auto button 53 operating projector 47 projector address 53 quick setup 50 source selection 54 terminology o...
Index lamp unit 167, 169 mounting 169 removal 167 language 52, 147 selection 52, 147 layout 97–98, 100, 102, 105–109 copy 109 delete 108 layout file services 106 layout services 106–109 copy 109 delete 108 load 106 rename 107 save as 109 load 106 main window 97–98, 100 position 100 size 98 overview ...
Index q quick language 52 selection 52 quick set up 50–52 lens 50–51 lens functions 51 lens key 50 pip 52 text on/off 50 quick setup 19 r rcu 19, 21–22 possibilities 22 rugged case 21 xlr adaptor 21–22 rear projection 14 recycling 8 refill mode 157 remote control 20–21, 41 battery 20 rugged case 21 ...
Index v versions 151 start up 151 voltages 152 start up 152 w warnings 6–7 cooling liquid circuit 7 mercury vapor warnings 7 ultraviolet radiation 6 uv radiation 6 white peaking 123 window 101 pip window 101 r59770021 clm r10+ 07/07/2008 209.
Index 210 r59770021 clm r10+ 07/07/2008.
Revision sheet to: barco nv events/documentation noordlaan 5, b-8520 kuurne phone: +32 56.36.89.70, fax: +32 56.36.88.24 e-mail: service.Mne@barco.Com, web: www.Barco.Com from: date: please correct the following points in this documentation (r59770021/06): page wrong correct r59770021 clm r10+ 07/07...