1. DL manuals
  2. Barco
  3. Projector
  4. R9698236
  5. Installation manual

Barco R9698236 Installation manual

Manual is about: OSEM/3-D Kit SLM Series

Summary of R9698236

  • Page 1

    Barco projection systems r9698236 date: 22.11..2001 installation manual 3-d polar/optical soft edge kit for projector slm series art. No.: r5976401 rev: 00 osem/3-d kit slm series.

  • Page 2

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, november 2001. All rights reserved. Trademarks are the rights of their respective owners. Barco n.V./projection systems noordlaan 5 b-8520 kuurne belgium tel : +32/56/368211 fax : +32/...

  • Page 3

    Barco ——————————————————— 3 ————————————— projection systems description and contents of the kit purpose of the kit the kit is designed to be mounted on slm projectors to support the polarizer and/or soft edge glass in front of the lens. Application of the kit the 3d/osem kit allows the user to disp...

  • Page 4

    Barco ——————————————————— 4 ————————————— projection systems b358674 r816851 g115520 r312010 r366242 r819615 v3673796 r312010 r366243 r823626 rv3620756 v3673796 b361138 r823625 b361138 b361138 back view polar holder front view polar holder l holder fixation bars: description and contents of the kit ...

  • Page 5

    Barco ——————————————————— 5 ————————————— projection systems some adjustment are more indicated in one application than another. For instance the horizontal fine adjustment is more indicated for osem where it lines up the soft edge and the edge of the image, whereas it becomes superfluous for polari...

  • Page 6

    Barco ——————————————————— 6 ————————————— projection systems mounting the fixation bars what has to be done two fixation bars have to be mounted on the projector frame. Necessary tools m6 spanner (n° 10) to be continued on next page mounting the fixation bars to mount the bars, follow the next proce...

  • Page 7

    Barco ——————————————————— 7 ————————————— projection systems 250 a b c d e mounting the fixation bars image 3 image 4 illustrations.

  • Page 8

    Barco ——————————————————— 8 ————————————— projection systems mounting the polarizer holder what has to be done the polarizer holder has to be mounted on the bars. Necessary tools m6 spanner (n° 10) mounting the holder to mount the holder, follow the next procedure: 1 2 1 1 place the holder on the fi...

  • Page 9

    Barco ——————————————————— 9 ————————————— projection systems holder distance adjustment what has to be done the distance between the holder and the lens has to be adjusted. This adjustment is necessary for the image to cover the largest area on the polarizer. Necessary tools m6 spanner (n°10) distan...

  • Page 10

    Barco ——————————————————— 10 ————————————— projection systems horizontal shift of the holder what has to be done horizontal shift adjustment of the polarholder. This adjustment is necessary to center the image (lightbeam) on the polarizer. Necessary tools none horizontal shift to perform the horizon...

  • Page 11

    Barco ——————————————————— 11 ————————————— projection systems vertical shift of the polar what has to be done vertical shift adjustment of the polar this adjustment allows to center the image onto the polarizer necessary tools no tools vertical shift to perform a vertical shift, follow the next proc...

  • Page 12

    Barco ——————————————————— 12 ————————————— projection systems horizontal fine adjustment (osem) what has to be done horizontal fine adjustment of the osem holder. This adjustment is necessary when performing optical soft edging. Necessary tools flat screwdriver horizontal fine adjustment to perform ...

  • Page 13

    Barco ——————————————————— 13 ————————————— projection systems vertical tilt of the holder (osem) what has to be done vertical tilt adjustment of the holder may become necessary for optical soft edge line up. Necessary tools flat screwdriver vertical tilt to perform a vertical tilt adjustment, follow...

  • Page 14

    Barco ——————————————————— 14 ————————————— projection systems removing the plastic foil what has to be done the protective foil has to be removed from the filter. This foil is only present when the polar surface is smaller than the holder (image 2) image 1 shows the operation on the projector, image...

  • Page 15

    Barco ——————————————————— 15 ————————————— projection systems osem glass switching (if necessary) t to be continued on next page what has to be done the osem glass can be switched to the other side i.E. A left osem glass can be used as a right osem glass and the other way around. Necessary tools fla...

  • Page 16

    Barco ——————————————————— 16 ————————————— projection systems osem glass switching (continued) illustrations image 3 image 4.