Barco projection systems r9898170 r9898171 date: 21.02..2001 installation manual 3-d motorized polar circ/lin kit for reality 909 art. No.: r5976406 rev: 00 motrized 3-d kit r909.
Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, february 2002. All rights reserved. Trademarks are the rights of their respective owners. Barco n.V./projection systems noordlaan 5 b-8520 kuurne belgium tel : +32/56/368211 fax : +32/...
Barco 3 projection systems description and contents of the kit purpose of the kit the kit is designed to be mounted on a barcoreality 909 projector to allow passive 3d projection. To be continued on next page kit features the kit contains a polarholder, a control mo...
Barco 4 projection systems description and contents of the kit (continued) illustrations spacers: 4 x r822171 circ: left : r822700 right: r822702 lin: left: r822759 right: r822761 circ: left : r822701 right: r822703 lin: left: r822760 right: r822762 polarizers polar...
Barco 5 projection systems mounting the polarizer frame what has to be done the polarizer holder has to be mounted on the projector frame. Necessary tools m6 spanner (n° 10) mounting the holder to mount the holder, follow the next procedure: 1 2 1&2 (next page) 3(ne...
Barco 6 projection systems mounting the polarizer frame (continued) illustrations image 2 image 3 to be continued on next page.
Barco 7 projection systems a mounting the polarizer frame (continued) illustration of the spacers (r822171) mounted image 4 image 5 illustration of the holder mounted, (polarizers activated).
Barco 8 projection systems mounting the control module what has to be done the module has to be mounted in the convergence drawer necessary tools flat screwdriver mounting the print to mount the print, follow the next procedure: 1 2 3 4 5 6 7 1 2 3 3 4 5&6 7 release...
Barco 9 projection systems mounting the control module (continued) illustrations a image 4 image 5 image 6.
Barco 10 projection systems mounting the control module (continued) illustration of the motor connection image 7.
Barco 11 projection systems activating the polarizers what has to be done the polarizers can be activated (bringing them in front of the lenses) via the menu or via an rs232 communication link (see r909 manuals for details on rs232 communi- cation) necessary tools n...
Barco 12 projection systems activating the polarizers (continued) one must be aware that the common settings (option1) are not saved in the memory block of that particular source. Which means that if option1 is on (polarizers activated) this will be the case for all...
