1. DL manuals
  2. Barco
  3. Projector
  4. REALITY 9200 DLC R9001397
  5. Owner's Manual

Barco REALITY 9200 DLC R9001397 Owner's Manual

Summary of REALITY 9200 DLC R9001397

  • Page 1

    Owner's manual reality 9200 dlc r9001397.

  • Page 3

    Barco projection systems date : 020798 owner's manual reality 9200 dlc r9001397 art. No. : r5975109a.

  • Page 4

    Due to constant research, the information in this manual is subject to change without notice. Produced by barco nv, july 1998. All rights reserved. Trademarks are the rights of their respective owners. Barco n.V./projection systems noordlaan 5 b-8520 kuurne belgium tel : +32/56/368211 fax : +32/56/3...

  • Page 5

    I-1 table of contents 5975109a barcoreality 9200 dlc 020798 table of contents ........................................................................................................................................................................... I-1 unpacking and dimensions ........................

  • Page 6

    I-2 table of contents 5975109a barcoreality 9200 dlc 020798 options ........................................................................................................................................................................................ 8-11 installation mode ...........................

  • Page 7

    1-1 unpacking and dimensions 5975109a barcoreality 9200 dlc 020798 1 1 2 3 4 5 3 7 9 pull to open unpacking and dimensions unpacking to open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the pro...

  • Page 8

    1-2 unpacking and dimensions 5975109a barcoreality 9200 dlc 020798 310a.Drw battery installation in the rcu. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. To install the battery, remove the battery cover on the backside of the re...

  • Page 9

    2-1 installation guidelines 5975109a barcoreality 9200 dlc 020798 2 installation guidelines 6fuhhqzlgwk installation guidelines careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection sys...

  • Page 10

    2-2 installation guidelines 5975109a barcoreality 9200 dlc 020798 b = distance between ceiling and top of the screen or between floor and bottom of the screen. A = correction value, distance between bottom side of projector (without feet) and middle of the lens. Value to be subtracted from b to obta...

  • Page 11

    3-1 location and functions of control 5975109a barcoreality 9200 dlc 020798 3 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 ou t ir-acknowledged ir-received diagnostics code ir-receiver 9 $ +] 0 i t h i s d e v i c e co m p l i e s w i t...

  • Page 12

    3-2 location and functions of control 5975109a barcoreality 9200 dlc 020798 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 (17(5 32a 3$86( - + 3+$6( )5((= 7(;7 (;,7 $'- 67% 6+$531(66 7,17 &2/25 %5,*+71(66 &2175$67 +(/3 ? Color phase sharpn tint brightn standby enter text exit pause &2175$67 b. Remote contr...

  • Page 13

    Installation set up 4-1 5975109a barcoreality 9200 dlc 020798 4 )urqw7deoh )urqw&hlolqj 5hdu7deoh 5hdu&hlolqj installation set up the projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. To change the configuration, ...

  • Page 14

    Installation set up 4-2 5975109a barcoreality 9200 dlc 020798.

  • Page 15

    5-1 connections 5975109a barcoreality 9200 dlc 020798 5 r g b v r g b h / c v on 98 2791 0 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) r s232 out ir-acknowledged ir-received diagnostics code ir-receive...

  • Page 16

    5-2 connections 5975109a barcoreality 9200 dlc 020798 r g b v r g b h / c v on 98 27 910 r g b h / c v h 9,'(2,1387 9, '(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs 232 o ut ir-acknowledged ir-received d ia gn ostics c ode ir-r e...

  • Page 17

    5-3 connections 5975109a barcoreality 9200 dlc 020798 select with or then to return. 21 2)) % + * 5 9 ,13 ,13 ,1387 $1$/2*,17(5)$&(0+] r g b v r g b h / c v on 9 8 27 91 0 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (80...

  • Page 18

    5-4 connections 5975109a barcoreality 9200 dlc 020798 r g b v r g b h / c v h rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 out ir-acknowledged ir-received diagnostics code fixed 5-input slot (slot 2) slot 2 has 5 bnc input terminals. Th...

  • Page 19

    5-5 connections 5975109a barcoreality 9200 dlc 020798 s-video 98 27 9 0 0 video l r audio 9,'(269,'(2,1387 on on t v tu n er, e .G . T v d m 40 ste re o v c r a ud io a m p lifie r c om po site v ide o vcr s-vhs luma/chroma r g b v r g b h / c v on 98 27910 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs...

  • Page 20

    5-6 connections 5975109a barcoreality 9200 dlc 020798 r g b h / c v on 5*%$1$/2*,1387 98 2791 0 )ordwlqjruqrqiordwlqjlqsxw floating non-floating -6\qfvhohfwlrq 6hsdudwhv\qf 6\qfrqjuhhq - - - - - 21 2)) % + * 5 9 ,13 ,13 ,1387 $1$/2*,17(5)$&(0+] r g b v r g b h / c v on 9 8 27 91 0 r g b h / c v h 9,...

  • Page 21

    5-7 connections 5975109a barcoreality 9200 dlc 020798 select with or then to return. Select with or then to return. Hdtv vcr r g b v r g b h / c v on 98 279 10 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripheral...

  • Page 22

    5-8 connections 5975109a barcoreality 9200 dlc 020798 r g b h / c v on 5*%/(9(/6 9 8 2 7920 hdtv vcr r g b v r g b h / c v on 98 279 10 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) r s232 o u t ir-ackno...

  • Page 23

    5-9 connections 5975109a barcoreality 9200 dlc 020798 d ig it a l v id e o s o u r c e d ig ita l v id e o r g b v r g b h / c v on 98 27 910 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 out ir-ac...

  • Page 24

    5-10 connections 5975109a barcoreality 9200 dlc 020798 screen communication cable projector ir remote receiver 800 projection room control room 56 frqqhfwlrq r g b v r g b h / c v on 98 27 9 1 0 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby...

  • Page 25

    6-1 controlling 5975109a barcoreality 9200 dlc 020798 6 ceiling screen ir sensor rcu r g b v r g b h / c v on 98 279 10 r g b h / c v h 9,'(2,1387 9,'(2 69, '(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 ou t ir-acknowledged ir-receiv...

  • Page 26

    6-2 controlling 5975109a barcoreality 9200 dlc 020798 0 127 how to display a projector address? Press the address key (recessed key on the rcu) with a pencil. The projector's address will be displayed in a 'text box'. This text box disappears after a few seconds. To continue using the rcu, it is nec...

  • Page 27

    7-1 start up of the adjustment mode 5975938a barcoreality 9200 dlc 020798 7 start up of the adjustment mode adjustment mode all source parameters, picture tuning and geometry are made while in the 'adjustment mode' . Press the adjust or enter key to enter the 'adjustment mode'. You are now in the 'a...

  • Page 28

    7-2 start up of the adjustment mode 5975938a barcoreality 9200 dlc 020798.

  • Page 29

    8-1 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 8 random access adjustment mode adjustment mode select a path from below : random access installation service source 01 select with or then to return. Starting up the random access adjustment mode push the control disc up or dow...

  • Page 30

    8-2 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 select with or then to return. Select with or then to return. Select with or then to return. Highlight file service by pushing the control disc up or down and press enter to select. The file service menu will be displayed. Enter...

  • Page 31

    8-3 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 the file name will be displayed in the upper right corner. The following items can be adjusted : total quantity horizontal pixels active quantity horizontal pixels horizontal start in pixels horizontal period in µs (is automatic...

  • Page 32

    8-4 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 select with or to toggle or to change value to return edit file options source number 1 clamp position [leading] clamp delay 0 clamp width 10 field polarity [pos] field select [both] vertical refresh [sync] vert. Sync polarity [...

  • Page 33

    8-5 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 select with or then to return. Select with or then to return. Rename to change the name of a selected file. Use the control disc to select rename and press enter. The rename selection menu will be displayed. Use the control disc...

  • Page 34

    8-6 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 select with or then to return. Select with or then to return. Select with or then to return. Delete to delete a selected file out of the list of files. Use the control disc to select delete and press enter. The delete selection ...

  • Page 35

    8-7 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 0 2.5 cti on/off cti : color transient improvement. To improve the transition from one color to another. Highlight cti by pushing the control disc up or down and press enter to toggle between on and off. This function applies to...

  • Page 36

    8-8 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 3 dynamic color depth increases color contrast for all video and data sources. Highlight dynamic color depth by pushing the control disc up or down and press enter to select. Off : default position min : half of the effect of me...

  • Page 37

    8-9 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 select with or then to return. Random access adjustment mode file service picture tuning geometry geometry shift size side keystone blanking options select with or then to return. Geometry shift size side keystone blanking optio...

  • Page 38

    8-10 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 size highlight size by pushing the control disc up or down and press enter to select. The size can be adjusted in a vertical or horizontal way. When adjusting the vertical size, the upper side of the image is fixed (table and c...

  • Page 39

    8-11 random access adjustment mode 5975109a barcoreality 9200 dlc 020798 adjustment of the blanking on the top of the image select with or then to return. Bottom blanking top blanking right blanking left blanking adjustment of the blanking on the bottom of the image correct by pushing the control di...

  • Page 40

    8-12 random access adjustment mode 5975109a barcoreality 9200 dlc 020798.

  • Page 41: Installation Mode

    9-1 installation mode 5975109a barcoreality 9200 dlc 020798 9 select with or then to return. Select with or then to return. Installation mode starting up the installation mode push the control disc up or down to highlight installation and then press enter. Enter continues to the installation mode se...

  • Page 42

    9-2 installation mode 5975109a barcoreality 9200 dlc 020798 select with or then to return. Select with or then to return. 800 peripheral when a rcvds05 is connected to the projector, the type of output module of this rcvds05 has to be defined in the 800 peripheral menu. The type of output module can...

  • Page 43

    9-3 installation mode 5975109a barcoreality 9200 dlc 020798 the pattern shows lines of one pixel. Near six lines on the displayed pattern, a screw is drawn with a number next to it (e.G. If displayed in green = corresponding with the screws and numbers on the green lcd panel). When turning a screw i...

  • Page 44

    9-4 installation mode 5975109a barcoreality 9200 dlc 020798 check if all lines are correctly converged. If so, press exit to return to the convergence menu and continue with blue on green. If not yet correctly converged, adjust screws 1, 2 and 3 for correct magnification. Blue on green convergence. ...

  • Page 45

    9-5 installation mode 5975109a barcoreality 9200 dlc 020798 select with or then to return. Configuration highlight "configuration" by pushing the control disc up or down and press enter to select. For more information, see projector configuration in chapter 4 : 'installation set up'. Osd color (on-s...

  • Page 46

    9-6 installation mode 5975109a barcoreality 9200 dlc 020798.

  • Page 47

    Service mode 10-1 5975109a barcoreality 9200 dlc 020798 10 select with or then to return. Service mode starting up the service mode push the control disc up or down to highlight service and then press enter. Some items in the service mode are password protected (when the password function is active)...

  • Page 48

    Service mode 10-2 5975109a barcoreality 9200 dlc 020798 service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history lamp drive mode more... Select with or then to return. Service barco logo panel adjustments preset input bala...

  • Page 49

    Service mode 10-3 5975109a barcoreality 9200 dlc 020798 r g b v r g b h / c v on 98 27910 r g b h / c v h 9,'(2,1387 9,'(2 69,'(2 rs 232 in remote projector mode : green - operation red - standby communication port (800-peripherals) rs232 out ir-acknowledged ir-received diagnostics code ir-receiver ...

  • Page 50

    Service mode 10-4 5975109a barcoreality 9200 dlc 020798 select with or then to return. Select with or then to return. Select with or then to return. Service identification change password change language change proj. Address change baudrate pc reset lamp runtime lamp runtine history select with or t...

  • Page 51

    Service mode 10-5 5975109a barcoreality 9200 dlc 020798 select with or then to return. Lamp drive mode silent normal boost select with or then to return. Lamp run time history to get an overview of the different lamp run times, highlight lamp run time history by pushing the control disc up or down a...

  • Page 52

    Service mode 10-6 5975109a barcoreality 9200 dlc 020798 select with or then to return. Select with or then to return. Select with or then to return. I2c diagnosis. Gives an overview of the correct working of the i²c controlled ic's. Highlight i2c diagnosis by pushing the control disc up or down and ...

  • Page 53

    A-1 appendix a : standard source set up files 5975109 barcoreality 9200 dlc 020798 a standard source set up files name : name of file, contains the settings resolution : image resolution, when fol- lowed by ...I means interlaced. Fvert hz : vertical frame frequency of the source fhor khz : horizonta...

  • Page 54

    A-2 appendix a : standard source set up files 5975109 barcoreality 9200 dlc 020798 name resolution fvert fhor fpix ptot pact ltot lact hz khz mhz pam500 640 x 400 60,000 26,400 22,810 864 840 440 400 pam800 1120 x 375i 89,872 36,443 50,000 1372 1120 406 375 pc98_1 640 x 400 56,416 24,823 21,050 848 ...

  • Page 55

    B-1 lenses 5975109a barcoreality 9200 dlc 020798 b loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : do not turn out the lens too far, otherwise it will fall out of the lens holder. When the image is fo...

  • Page 56

    B-2 lenses 5975109a barcoreality 9200 dlc 020798 lenses e m a n s n e l h t g n e l ) h c n i ( m m s n e l . M a i d ) h c n i ( m m t h g i e w ) s b l ( g k r e b m u n r e d r o ) 1 : 2 . 1 ( d h q ) 6 9 . 9 ( 3 5 2 ) 4 4 . 7 ( 9 8 1 ) 2 . 9 1 ( 7 . 8 0 6 7 9 2 8 9 r ) 1 : 2 . 2 ( d h ) 5 2 . 9 ...

  • Page 57

    C-1 source numbers 80 - 89 and 90 - 99 5975109a barcoreality 9200 dlc 020798 c source numbers 80 - 89 and 90 - 99 projector without any 800 peripheral connected. The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source...

  • Page 58

    C-2 source numbers 80 - 89 and 90 - 99 5975109a barcoreality 9200 dlc 020798 source numbers 81 - 85 only valid if no input module is connected to slot 81 - 85 of a rcvds05. The source numbers 81 - 85 correspond to the physical inputs 1 - 5 of the projector. E.G. When slot 1 of the projector has to b...

  • Page 59

    5975109a barcoreality 9200dlc 020798 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6.