Barco RLS W12 Reference Manual

Other manuals for RLS W12: User Manual

Summary of RLS W12

  • Page 1

    Rls w12 mswu-81e.

  • Page 2

    Document version: 00 barco nv projection division noordlaan 5, b-8520 kuurne phone: +32 56.36.82.11 fax: +32 56.36.883.86 support: www.Barco.Com/esupport visit us at the web: www.Barco.Com.

  • Page 3

    1. Mswu-81e serial communication mswu-81e – 2014/10/30 3 1. Rls w12 serial communication about this chapter this chapter contains serial commands to control the projector. Overview interface and requirements cable type and pin definition system operation commands.

  • Page 4

    1. Mswu-81e serial communication 4 mswu-81e – 2014/10/30 1.1 interface and requirements control command protocol the rs-232 commands use only ascii characters which can be entered using a typical terminal emulator like windows hyperterminal with the following setting: bits per second: 115200 data bi...

  • Page 5

    1. Mswu-81e serial communication mswu-81e – 2014/10/30 5 1.3 system operation commands introduction the operation commands tell the projector what to do. All commands start with 2 letters: “op” for operations commands and a space [sp] then following a control command then finally the value wants to ...

  • Page 6

    1. Mswu-81e serial communication 6 mswu-81e – 2014/10/30 1.4 list of valid operations commands for barco mswu-81e rls w12 operations commands no. Operation commands values notes 1 input.Sel = ? 0 = hdmi 1 = hd baset 2 = rgb d-15 3 = yuv 1 4 = rgbhv/yuv2 5 = reserve (cvbs) 6 = reserve (svideo) 7 = re...

  • Page 7

    1. Mswu-81e serial communication mswu-81e – 2014/10/30 7 19 h.Total = ? + - 0-200 note2 note7 20 h.Pos = ? + - 0-200 note2 21 h.Phase = ? + - 0-200 note2 note7 22 v.Pos = ? + - 0-200 note2 23 auto.Img (execute) note2 24 picture.Mode = ? 0 = bright 1 = presentation 2 = video 3 = rgb only 25 color.Spa...

  • Page 8

    1. Mswu-81e serial communication 8 mswu-81e – 2014/10/30 41 horiz.Offset + - + = right - = left note1 42 dyna.Cont = ? 0 = off 1 = on note2 43 gamma = ? 0 = 1.8 1 = 2.0 2 = 2.2 3 = 2.35 4 = 2.5 5 = s-curve (h8 only) note2 44 int.Ptrn = ? 0 = off 1 = color bars 2 = hatch 3 = burst 4 = red 5 = green 6...

  • Page 9

    1. Mswu-81e serial communication mswu-81e – 2014/10/30 9 65 blank.Rst (execute) 66 scen.Stat = ? 0 = off 1 = on 67 scen.Wht.Top = ? + - 0 ~ 500 68 scen.Wht.Btm 69 scen.Wht.Left = ? + - 0 ~ 800 70 scen.Wht.Right 71 scen.Blk.Top = ? + - 0 ~ 32 72 scen.Blk.Btm 73 scen.Blk.Left = ? + - 0 ~ 32 74 scen.Bl...

  • Page 10

    1. Mswu-81e serial communication 10 mswu-81e – 2014/10/30 96 trig.1 = ? 0 = 5:4 1 = 4:3 2 = 16:10 3 = 16:9 4 = 1.88 5 = 2.35 6 = letterbox 7 = native 8 = unscaled 9 = auto note1 97 trig.2 = ? 0 = 5:4 1 = 4:3 2 = 16:10 3 = 16:9 4 = 1.88 5 = 2.35 6 = letterbox 7 = native 8 = unscaled 9 = auto note1 98...

  • Page 11

    1. Mswu-81e serial communication mswu-81e – 2014/10/30 11 108 v.Refresh ? Note2 109 lamp1.Hours ? 110 lamp2.Hours ? 111 lamp1.Reset (execute) 112 lamp2.Reset (execute) 113 proj.Runtime ? 114 blue.Only = ? 0 = off 1 = on note1 115 fact.Reset (execute) 116 cs_cust_rx = ? 000 ~ 999 note1 117 cs_cust_ry...

  • Page 12

    1. Mswu-81e serial communication 12 mswu-81e – 2014/10/30 note7: only applicable when source is one of rgb d-15, yuv1 and rgbhv/yuv2. Note8: not applicable when color space is set to custom. Note9: pip.Sel can not be set to 0. Note10: not applicable when pip is off. Note11: not applicable when lamp ...