Bargeheights BAR 252 User Manual

Manual is about: RGB Linear Wash Luminaire

Summary of BAR 252

  • Page 1

    User manual rgb linear wash luminaire bar 252.

  • Page 2

    Page 3 ©2010 bargeheights, inc. Bar 252 user manual rev. A 1. Thebeginning thanks! Thank you for choosing the bargeheights bar 252! This versa- tile linear led wash luminaire will provide reliable performance day in and day out. To ensure long lasting performance, please follow the guidelines in thi...

  • Page 3

    Page 4 page 5 bar 252 user manual rev. A ©2010 bargeheights, inc. Introduction • linear led wash luminaire • full rgb color mixing via 252 leds (108 red, 72 green, 72 blue) • high output, low power consumption • variable electronic strobe/dimmer • 3 segments individually controllable within single u...

  • Page 4

    Page 6 page 7 bar 252 user manual rev. A ©2010 bargeheights, inc. 3. Setup dmx cabling the bar 252 has standard 3-pin xlr connectors for dmx con- trol and daisy-chaining. Up to 32 devices can be daisy-chained together on a single run. Standard microphone cables will probably work ok, but dmx is a se...

  • Page 5

    Page 8 page 9 bar 252 user manual rev. A ©2010 bargeheights, inc. 4. Operation/configuration we here at bargeheights don’t really care for dip switches. They are hard to see in the dark, and since most of us don’t quickly think in binary, they are tricky to set properly. The bar 252 has an led displ...

  • Page 6

    Page 10 page 11 bar 252 user manual rev. A ©2010 bargeheights, inc. Dmx control mode to change the dmx starting address: • press until a001 is displayed. • press to display the channel number, and press or to select your starting address. ( 1-512 ) • press to assign your selection. Ensure your bar 2...

  • Page 7

    Page 12 page 13 bar 252 user manual rev. A ©2010 bargeheights, inc. Standalone control modes the bar 252 has several standalone control modes that do not require a dmx control signal. Ensure your bar 252 is in standalone control mode: • press until the control mode is displayed. ( dnco auto slau ) •...

  • Page 8

    Page 14 page 15 bar 252 user manual rev. A ©2010 bargeheights, inc. Technical specifications: model: bar 252 leds: 252 x 10mm (108 red, 72 green, 72 blue) voltage: 100-240v / 50-60hz dimensions: 3.25in (h) x 2.5in (w) x 42in (l) 82.5mm (h) x 63.5mm (w) x 1066mm (l) weight: 5lbs (2.25kg) power consum...

  • Page 9

    Page 16 bar 252 user manual rev. A shipping damage damage incurred in shipping is the responsibility of the shipper, and must be reported to the shipping company immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Contact us barge heights inc www.Bargeheights...