Bargeheights LED 54AW User Manual - page 11
Page 11
©2010 Bargeheights, Inc.
Standalone Control Modes
The LED 54AW has several standalone control modes that do
not require a DMX control signal.
• Press then press or until
AL--
or
3L--
or
3l--
is displayed.
• Press to select, and pressor to
adjust the level of that color (Amber, White 1, or White 2)
• The LED 54AW will stay on in the selected color until the
mode is changed.
FLAS
is Strobe Mode. The LED 54AW will strobe in varying
speeds from
FL00
to
FL12
.
• Press then press or until
FLAS
is
displayed.
• Press to select, and pressor to
adjust the speed of strobe (
FL00
to
FL12
).
FAdE
is Color Fade Mode. The LED 54AW will fade colors in
varying speeds from
FA00
to
FA12
.
• Press then press or until
FAdE
is
displayed.
• Press to select, and pressor to
adjust the speed of strobe (
FA00
to
FA12
).
ASC-
is Color Cycle Mode. The LED 54AW will switch colors in
varying speeds from
AS00
to
AS12
.
• Press then press or until
ASC-
is
displayed.
• Press to select, and pressor to
adjust the speed of strobe (
AS00
to
AS12
).
SOUA
is Sound Control: Color Cycle Mode. The LED 54AW will
respond by changing color to music or sounds via its onboard
microphone.
SOUF
is Sound Control: Strobe Mode. The LED 54AW will re-
spond by flashing to music or sounds via its onboard micro-
phone.