Bargeheights LED 54AW User Manual - page 7
Page 12
LED 54AW User Manual rev. A
Page 13
©2010 Bargeheights, Inc.
Master/Slave Mode
Up to 32 LED 54AWs may be connected via the 3-pin DMX con-
nections and controlled simultaneously without a DMX control-
ler by using Master/Slave Mode. In this mode you can set one
fixture in the line to act as the master controller – and up to 32
other fixtures can be connected and will mirror the operation of
the Master.
• Select the desired standalone mode on the Master LED 54AW.
• Set the DMX address of each Slave fixture to
A001
.
• Make sure the Master is the first fixture in the line connected
via the 3-pin DMX connections on the rear of the LED 54AW.
Technical Specifications:
Model:
LED 54AW
LEDs:
54 x 1watt (18 Amber, 36 White)
Voltage:
100-250v / 50-60Hz
Dimensions:
9in (h) x 9in (w) x 12in (l)
230mm (h) x 230mm (w) x 310mm (l)
Weight:
11lbs (5.0Kg)
Power
Consumption:
56 watts
DMX Channels:
4 channels
Beam Spread:
25 degrees
Setup & Addressing: LED Menu display – no dip switches!
Photometric Data:
Throw Distance
2.0m
6.6’
4.0m
13.1’
6.0m
19.7’
8.0m
26.2’
Beam Diameter
.87m
2.9’
1.77m
5.8’
2.66m
8.7’
3.54m
11.6’
Illuminance (lux)
5910
1038
510
396
Photometric data taken with all channels at full. Due to varia-
tions in all LEDs, these values should be considered approxi-
mate. All LED sources experience a lowering of output and
some color shift over time. LED output varies with ambient
operating temperatures.