- DL manuals
- Bargeheights
- Lighting Equipment
- LED PAR
- User Manual
Bargeheights LED PAR User Manual
Summary of LED PAR
Page 1
User manual rgb wash luminaire led par.
Page 2: 1. The Beginning
Led par user manual rev. A table ofcontents 1. The beginning unpacking support introduction dmx quick reference 2. Safety information 3. Setup dmx cabling dmx termination 3-pin vs. 5-pin master/slave mode 4. Operation/configuration menu structure dmx control mode 1 channel mode 2 channel mode 3, 4, ...
Page 3: Thanks!
Page 3 ©2010 bargeheights, inc. 1. Thebeginning thanks! Thank you for choosing the bargeheights led par! This versa- tile par-style led wash luminaire will provide reliable perfor- mance day in and day out. To ensure long lasting performance, please follow the guidelines in this manual. The instruct...
Page 4: Introduction
Page 4 led 36 user manual rev. A introduction • par-style led wash luminaire • full rgb color mixing via 183 leds (60 red, 63 green, 60 blue) • high output, low power consumption • variable electronic strobe • variable electronic dimmer • master/slave modes • built-in standalone modes - no controlle...
Page 5: Caution!
Page 5 ©2010 bargeheights, inc. 2. Safetyinformation • do not connect the fixture into a dimmer. Use constant line voltage only to avoid damage. • make sure you are connecting the fixture to line voltage that is not higher than the voltage stated on the rear of the fixture. • the led par is for indo...
Page 6
Page 6 led 36 user manual rev. A 3. Setup dmx cabling the led par has standard 3-pin xlr connectors for dmx con- trol and daisy-chaining. Up to 32 devices can be daisy-chained together on a single run. Standard microphone cables will probably work ok, but dmx is a serial data transmission with imped...
Page 7
Page 7 ©2010 bargeheights, inc. 3-pin vs. 5-pin some manufacturers use 5-pin xlr connectors for dmx trans- mission. Don’t worry! The two are still compatible. Adapters are available on the internet and from lighting retailers. If you want to build your own, here are the proper connections: cable con...
Page 8
Page 8 led 36 user manual rev. A 4. Operation/configuration we here at bargeheights don’t really care for dip switches. They are hard to see in the dark, and since most of us don’t quickly think in binary, they are tricky to set properly. The led par has an led display with a simple menu system. The...
Page 9
Page 9 ©2010 bargeheights, inc. Menu structure addr shnd led idsp chnd slnd bala 1-512 soun on off fade nast red 0-255 0-255 0-255 colo off on auto noff gree 1ch-7ch sl 2 sl 1 blue dmx address setting sound control mode color selection mode color fade mode auto operation mode dmx channel mode (1ch -...
Page 10
Page 10 led 36 user manual rev. A dmx control mode to change the dmx starting address: • press until addr is displayed. • press to display the channel number, and press or to select your starting address. ( 1-512 ) • press to assign your selection, then press and hold for three (3) seconds to confir...
Page 11
Page 11 ©2010 bargeheights, inc. 1 channel dmx mode channel channel value function 1 0 1-7 8-15 16-23 24-31 32-39 40-47 48-55 56-63 64-71 72-79 80-87 88-95 96-103 104-111 112-119 120-127 128-135 136-143 144-151 152-159 160-167 168-175 176-183 184-191 192-199 200-207 208-215 216-223 224-231 232-239 2...
Page 12
Page 12 led 36 user manual rev. A 2 channel dmx mode channel channel value function 1 0 1-7 8-15 16-23 24-31 32-39 40-47 48-55 56-63 64-71 72-79 80-87 88-95 96-103 104-111 112-119 120-127 128-135 136-143 144-151 152-159 160-167 168-175 176-183 184-191 192-199 200-207 208-215 216-223 224-231 232-239 ...
Page 13
Page 13 ©2010 bargeheights, inc. 3 channel dmx mode channel channel value function 1 0-255 red intensity 2 0-255 green intensity 3 0-255 blue intensity 4 channel dmx mode channel channel value function 1 0-255 red intensity 2 0-255 green intensity 3 0-255 blue intensity 4 0-255 overall intensity 5 c...
Page 14
Page 14 led 36 user manual rev. A 6 channel dmx mode channel channel value function 1 0-255 red intensity 2 0-255 green intensity 3 0-255 blue intensity 4 0-255 colors 1-32 (see 1 channel mode) 5 0-7 8-255 no strobe strobe slow -> fast 6 0-255 overall intensity 7 channel dmx mode channel channel val...
Page 15
Page 15 ©2010 bargeheights, inc. Standalone control modes the led par has several standalone control modes that do not require a dmx control signal. • press until shnd is displayed. • press to select, and pressor to select your desired standalone mode. Soun is sound control mode. The led par will re...
Page 16
Page 16 led 36 user manual rev. A master/slave mode up to 32 led pars may be connected via the 3-pin dmx con- nections and controlled simultaneously without a dmx control- ler by using master/slave mode. In this mode you can set one fixture in the line to act as the master controller. • press until ...
Page 17
Page 17 ©2010 bargeheights, inc. Led display the rear facing led menu display can be set to hide when it is not in use. • press until led is displayed. • press to select. The current choice will be shown ( on or off ) • pressor to select the display status. • press to assign selection, then press an...
Page 18
Page 18 led 36 user manual rev. A technical specifications: model: led par leds: 183 x 10mm (60 red, 63 green, 60 blue) voltage: 100-250v / 50-60hz dimensions: 9in (h) x 9in (w) x 12in (l) 230mm (h) x 230mm (w) x 310mm (l) weight: 3.5lbs (1.6kg) power consumption: 25 watts dmx channels: 1, 2, 3, 4, ...
Page 19
Page 19 ©2010 bargeheights, inc. 5. Care/maintenance your led par is designed for long life with minimal upkeep. Since there are no lamps to replace, maintenance is simple - just keep your led par clean and dry. Especially if you are in a dusty or haze-filled environment, there are some simple steps...
Page 20
Page 20 led 36 user manual rev. A shipping damage damage incurred in shipping is the responsibility of the shipper, and must be reported to the shipping company immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Contact us barge heights inc www.Bargeheights....