BARIX EXSTREAMER 1 2 0 Quick Install Manual

Page of 4

Download

Bookmark us

E X S T R E A M E R

1 2 0

Quick Install Guide Version 1.0

Advanced multiformat

network audio decoder

Package contents

Exstreamer 120

b Power supply

RCA Stereo cable

d IR remote control

e Batteries (2 x AAA)

Cable Set AUDIO (not included)

Earphone

RCA Stereo cable

h Network cable

Serial cable

Firmware

This device comes preloaded with the Streaming Client firmware. Alternative firmware,

such as the standard Exstreamer firmware, can be downloaded from www.barix.com.

Support

For support please contact your local dealer or visit www.barix.com.

without notice. All mentioned trademarks belong to their respective owners

and are used for reference only. Barix, Exstreamer and SonicIP are trade-

marks of Barix AG, Switzerland, and are registered in certain countries.

Page 1
E x s t r e a m e r 1 2 0 quick install guide version 1.0 advanced multiformat network audio decoder package contents a exstreamer 120 b power supply c rca stereo cable d ir remote control e batteries (2 x aaa) cable set audio (not included) f earphone g rca stereo cable h network cable i serial cab...
Page 2
Front view 5 1 2 3 4 1 reset button a brief press of the button will reset the device. Holding the reset button pressed in for approximately 10 seconds will reset the device and restore the factory default settings when the button is released. 2 microsd slot for microsd(hc) flash memory card (not su...
Page 3
Step 1 plug a standard (straight) network cable (h, not included) into the network port (c) of the exstreamer and the other end into your hub or switch. You can also use a crossover network cable (not included) for a direct connection to your pc. Step 2 i) plug standard headphones or the earphone (f...
Page 4
This procedure is used to temporarily set the ip address for first time browser access to the exstreamer, in the case where you have no audio cables connected, and hence do not know the current ip address of the exstreamer. Attention: after this procedure the temporary ip will be active only as long...