BARIX EXSTREAMER Quick Install Manual

Manual is about: Network audio player for digital audio streaming in custom home installations and commercial applications

Page of 4

Download

Bookmark us

EXSTREAMER

STORE & PLAY

Quick Install Guide

Version 1.0

Networked IP Audio Decoder

Package contents

a Exstreamer Store & Play

b Power supply (except NoPSU version)

c MicroSD internal storage (except NoSD version)

Cable Set AUDIO (not included)

d Earphone

e RCA Stereo cable

Network cable

g Serial cable

Firmware

This device comes preloaded with standard Store & Play firmware and is ready to be used out

of the box without having to install any additional software. Check for available latest firmware

updates at www.barix.com

Support

For support please contact your local dealer or visit www.barix.com.

to their respective owners and are used for reference only. Barix, Exstreamer and SonicIP are trademarks of Barix AG, Switzerland,

and are registered in certain countries.

Page 1
Exstreamer store & play quick install guide version 1.0 networked ip audio decoder package contents a exstreamer store & play b power supply (except nopsu version) c microsd internal storage (except nosd version) cable set audio (not included) d earphone e rca stereo cable f network cable g serial c...
Page 2
Front view a reset button a brief press of the button will reset the device. Holding the reset button pressed in for approximately 10 seconds (until red led starts flashing) will reset the device and restore the factory default settings when the button is released. B ext. Usb 2.0 interface for flash...
Page 3
1 installation step 1 plug a standard (straight) network cable (f, not included) into the network port (g) of the exstreamer and the other end into your hub or switch. You can also use a crossover network cable (not included) for a direct connection to your pc. Step 2 i) plug standard headphones or ...
Page 4
3 troubleshooting • if the status leds (c) stay dark check the power cabling (installation step 3). • check if the green link led (i) is lit, if it is not then check your network cabling (network port g) • if you have doubts about the current device settings you can revert the device to its factory ...