BarMaid BLE-310 Instruction Manual

Summary of BLE-310

  • Page 1

    Instruction manual 3hp commercial blender ble-310

  • Page 2: Blender Safety

    Blender safety danger electricity general caution danger risk of electrical schock danger keep hands clear warning warning electrical shock hazard moving parts! Plug into a grounded outlet. Do not remove ground. Do not use an adapter. Do not use an extension cord. Failure to follow these instruction...

  • Page 3: Important Safeguards

    Important safeguards when using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all the instructions before using the blender. 2. Plug into a grounded outlet. 3. Do not remove ground. 4. Do not use an adapter. 5. Do not use an extension cor...

  • Page 4: Blender Operation

    Blender operation blending tips to operate the blender, proceed as follows: 1. Before the initial use, wash container assembly and lid thoroughly. (refer to “cleaning instructions") do not put the container assembly & blender base assembly in the dishwasher. 2. Place the blender on a dry, clean, lev...

  • Page 5: Cleaning Instructions

    Cleaning instructions blender care the ble-310 blender container parts are corrosion resistant, sanitary and easily cleaned. Do not put the container assembly or blender base assembly in the dishwasher. 1. Before first use and after every use, separate container from the base. 2. To clean the contai...

  • Page 6: Troubleshooting

    Troubleshooting problem solution 1. Blender fails to start 2. Stopped 3. Ingredients do not mix properly 1. Place container properly on the base. 2. Check to ensure controls are clean and moving freely. 3. Double-check to ensure power cord is securely plugged into the electric outlet. 4. Check to se...

  • Page 7: Maintenance

    Maintenance inspect the blender and its various parts and replace as follows: daily weekly quarterly 1. Unplug the blender and remove the container from the base. 2. Inspect the container blades for wear, nicks, and broken or loose blades. Replace if necessary. 1. Unplug the blender. 2. Inspect the ...

  • Page 8: Bar Maid Corporation

    Bar maid corporation 2950 nw 22nd terrace, pompano beach, fl 33069 www.Barmaidwashers.Com.