Installation and operation manual diaphragm pumps cast iron (cdg) & aluminum (adg) form no. 082923-rev. B important: read all instructions in this manual before operating pump. As a result of crane pumps & systems, inc., constant product improvement program, product changes may occur. As such crane ...
Table of contents warnings and safety precautions ....................................................................... 3 a. Pump specifications .................................................................................................... 4 - 5 b. General information ..........................
Safety first! Please read this before installing or operating pump. General 1. Most accidents can be avoided by using common sense. 2. Read the operation and maintenance instruction manual supplied with the pump. 3. Do not wear loose clothing that may become entangled in the impeller or other moving...
Section: a- pump specifications: skid mounted suction/discharge: 2cdg, 2adg: 2" x 2" npt- faced nipples 3cdg, 3adg: 3" x 3" npt- faced nipples liquid temperature: 160° f continuous. Solids: 2" 1.5" spherical 3" 1.75" spherical suction chamber: adg: aluminum, class 319. Cdg: cast iron astm a-48, clas...
Section: a- pump specifications: wheel mounted suction/discharge: 2cdg, 2adg: 2" x 2" npt- faced nipples 3cdg, 3adg: 3" x 3" npt- faced nipples liquid temperature: 160° f continuous. Solids: 2" 1.5" spherical 3" 1.75" spherical suction chamber: adg: aluminum, class 319. Cdg: cast iron astm a-48, cla...
Section b: general information b-1) to the purchaser: congratulations! You are the owner of one of the finest pumps on the market today. Barnes ® pumps are products engineered and manufactured of high quality components. Over one hundred years of pump building experience along with a continuing qual...
Section c: prepare pump for operation as follows: 1. See engine manufacturer’s instruction manual for quantity, grade and viscosity of oil and change interval. Fill engine crankcase with amount needed. And check oil level frequent. Fill fuel tank per manufacturer,s recommendations. Be familiar with ...
Section d: maintenance instructions 1. Keep interior of pump and valves clean. When pumping liquids containing foreign materials, flush out pump with clear water whenever possible. 2. Keep suction hose air tight and check for leaks and loose lining, as these are major trouble sources when priming. 3...
2 1 section e: trouble shooting if your pump does not prime or operate properly, check the following: 1. Pump may be too high above or far from water. 2. Leaks in suction hose or hose connection to pump. Check if hose inner lining has loosened. If loose, pump suction will cause lining to collapse an...
10
Parts list 2cdg 3cdg item qty. Description part no. Part no. I 2 extra hvy. Nipple p3015 p3041 2 1 groove pin assembly p3354ay-c2 p3309ay-c2 3 2 type d" groove pin 1/8" x 3/8’’ 1/8" x 3/8" 4 1 2" fill plug p3322 p3322 5 1 2" plug gasket p3323 p3323 6 4 hex. Screw & l.W 3/8" x 1-1/2" 1/2" x 1-3/4" 7 ...
For 2 wheel mounting only: 59 2 washer, not shown 3/4" n/a 60 1 bumper p3327 p3327 61 4 hex screw hn lw 5/16 x 2 5/16 x 2 62 1 axle bracker p3039 p3319r 63 1 axle bracket (opp. Side) p3039 p3319l 64 2 hex. Screw hn lw 3/8 x 1-1/4 3/8 x 1-1/4 65 1 axle p3318a p3318 66 2 rubber tired wheel w27-4 w27-4...
Parts list 2adg 3adg item qty. Description part no. Part no. I 2 extra hvy. Nipple p3015 p3041 2 1 groove pin assembly p3354ay-a1 p3309ay-a1 3 2 type d" groove pin 1/8" x 3/8’’ 1/8" x 3/8" 4 1 2" fill plug p3322 p3322 5 1 2" plug gasket p3323 p3323 6 4 hex. Screw & l.W 3/8" x 1-1/2" 1/2" x 1-3/4" 7 ...
For 2 wheel mounting only: 59 2 washer, not shown 3/4" n/a 60 1 bumper p3327 p3327 61 4 hex screw hn lw 5/16 x 2 5/16 x 2 62 1 axle bracker p3039 p3319r 63 1 axle bracket (opp. Side) p3039 p3319l 64 2 hex. Screw hn lw 3/8 x 1-1/4 3/8 x 1-1/4 65 1 axle p3318a p3318 66 2 rubber tired wheel w27-4a w27-...
Important ! Warranty registration your product is covered by the enclosed warranty. Complete the warranty registration form and returned to crane pumps & systems, inc. Warranty service group important! If you have a claim under the provision of the warranty, contact your local crane pumps & systems,...
Barnes ® limited warranty we warrant to our immediate customer and to the ultimate consumer that products of our manufacture will be free of defects in material and workmanship under normal use and service for the following time periods, when installed and maintained in accordance with our instructi...
Start-up report engine driven this report is designed to insure the customer that customer service and a quality product are the number one priority with crane pumps & systems, inc. Please answer the following questions completely and as accurately as possible. Mail this form to: in u.S.A. Send to: ...
I have received the previous information (name of operator) name of company date: i certify this report to be accurate (name of start-up person) employed by date: date and time of start-up present at start-up: ( ) engineer ( ) operator ( ) contractor ( ) other to be filled out by factory: start - up...
** important ! ** warranty registration customer’s name date installed address city state zip phone # fax # dealer’s name city state zip model no. Serial no. Part no. Brand: fold here important ! Warranty registration your product is covered by the enclosed warranty. Complete the warranty registrati...
Crane pumps & systems, inc. Warranty service group 420 third street p.O. Box 603 piqua, ohio 45356-0603 - u.S.A. Place stamp here fold here and tape, do not staple.
