BARO BR-W2 Product Manual - Device Outline:
BEFORE USE
4
www.barosnt.com
Device Outline:
This product is a wireless device using the UHF 900MHz spectrum. It is designed for use in homes, offices,
government facilities, broadcasting centres and other locations where wireless transmission is required. The
system operates within internationally designated channel frequencies, and enables the accurate wireless
transmission of audio signals without any distortion or interference.
General Specifications (BR-W2):
Operating Frequency
925.120MHz to 937.420MHz
Oscillation Mode
62Channel . PLL synthesized
Receiving Mode
1 Channel System
Modulation Method
FM(F3G)
Total Harmonic Distortion
Less Than 0.5% (Ref ± 12kHz Distortion, 1khz Mod)
Audio Frequency response
50 to 16,000Hz (± 3dB)
Audio output
100Mv / Input 10mV
S/N Ratio
More Then 60dB
Audio Outputs Type
Unbalanced / Balanced XLR
Power Supply
DC12V / 500mA / Adapter
Operation Temperature
-5℃ to 60℃
Device Features:
•
Country of Origin:
South Korea
•
PLL synthesizer type transmitting microphones with 62 Channel settings. Freely select the operating
channel with clear audio reproduction and no interference.
•
The adoption of FND makes switching operating channels simple.
•
Through tone adjustments, manage the high and mid levels to avoid howling.
•
Adoption of RF volume adjustment reduces noise and interference from other nearby wireless devices.
•
Usage time is extended with a low-power circuit design. With a fully charge Ni-Mh battery, over 10 hours
of use is possible..