- DL manuals
- Baroness
- Lawn Mower
- LM56GA(GAF)
- Owner's Handling Manual
Baroness LM56GA(GAF) Owner's Handling Manual
Summary of LM56GA(GAF)
Page 1
Read this manual before using the machine. Owner's handling manual green mower lawn mower lm56ga sn 14723 and onwards lm66ta sn 10045 and onwards.
Page 2
Contents…………………………………………………………………………………… 1 warning for safety …………………………………………………………………………… 2 greeting ……………………………………………………………………………………… 2 safety precautions …………………………………………………………………………… 3 part names …………………………………………………………………………………… 5 features of lm56ga/lm66ga/lm66ta ………………………………………………… 6 specifica...
Page 3
Precautions: ● the name of the model may be different when you make an inquiry about your machine. Advise us of the machine number as well. ● the contents of this manual are subject to change without notice. Warning for safety warning marks indicate important items for safety. Observe them strictly....
Page 4
3 the lawn mower has a rotating blade reel cylinder (sharp blade), and the safety of operation is subject to the place of use, obstacles, lawn conditions, and many other factors. As a maker, we specifically request the user to thoroughly inspect and maintain the machine, make efforts to become skilf...
Page 5
4 7) precautions to take during operation ● check that there is no person or any object that may be broken around the machine during operation. ● check that there is no player in the vicinity, otherwise a flying golf ball may hit against you. ● exercise adequate care so that you will not get injured...
Page 6
Part names 5 engine engine clutch cover engine switch cord brake lever throttle lever handle blade reel drum wheel travelling wheel wheel shaft grass catcher front roller front groomer engine switch main clutch lever groomer clutch lever.
Page 7
Features of lm56ga・66ga・66ta specifications ● the lightest green mower of all models of this class ● the weight balance and undulation following performance have been improved for better green mowing. ● the newly-designed handle improves the operability, lessening the operator's fatigue. ● the struc...
Page 8
7 installing the stand 1) temporarily secure the left side of the stand to the frame with the bolt, washer (inside), and nut (outside). 2) put the spring on the projection of the frame and the projection at the right edge of the stand. 3) while pulling the right side of the stand backward, make alig...
Page 9
8 2.Inspection before use greasing the transmission and intermediate transmission gears are equipped with needle bearings. Grease them every 10 hours. Shortage of grease will cause damage to the needle bearings. Inspection of engine oil replenish the engine with engine oil. (a correct level will be ...
Page 10
5.Machine operation before operation ● check that each portion - especially the brake and clutch - operates satisfactorily before starting machine operation. ● make sure that the machine can be stopped immediately at any time. ● exercise care so that you and people around the machine will not be inj...
Page 11
Groomer clutch lever the lever is at the top of the groomer gear case on the outside of the right frame. There are three changeover positions - "normal rotation" (in the same direction as the rotating direction of the blade reel cylinder), "rotation stop," and "reverse rotation" (in the direction op...
Page 12
Clutch cover the clutch cover is on the left side of the engine, covering the engine clutch. It is secured by turning the fastenbolt clockwise (by 4-5 turns). Travelling wheel the travelling wheel is used to move the machine from green to green. Set the stand up right, pull the tire holding the leve...
Page 13
Setting the mowing height gauge and blade thickness 1) set the mowing height gauge at the desired height. The minimum mowing height with respect to each bottom blade thickness is shown below. ※ the minimum mowing height is the height on the average condition green. Lawn may be shaved when the undula...
Page 14
13 6. Blade engagement check that the engine is at rest before making adjustment. Grind and adjust the blade reel cylinder and bottom blade entirely so that a newspaper will be cut sharply. ［important］ lapping conduct lapping after mowing operation (before adjusting the engagement). 1) check the ent...
Page 15
14 cylindrical grinding and installation of blade reel cylinder cylindrically grind the blade reel cylinder when it is worn away and has become conical. (ask the dealer you purchased the machine from for cylindrical grinding.) ［important］ installation of blade reel cylinder 6-4 6-5 attaching/detachi...
Page 16
Specification for maintenance position of mower during maintenance if the mower handle is left leaned on the ground for a long time during maintenance, engine oil may enter the engine combustion chamber and cause the engine to run improperly. Be careful not to keep this position long. 7.Long-term st...
Page 17
9) when the machine is to be stored for a long time exceeding 5 months, remove gasoline from the engine. 10) engine maintenance schedule to keep the engine in satisfactory status at all times, be sure to conduct maintenance and inspection according to the following table: 9.Maintenance schedule 8. P...
Page 18
17 location of labels for lm56ga and lm66ta 1 2 3 4 5 6 7 8 9 10 11 12 code no. Part name qty /unit code no. Part name clutch mark engine oil warning mark noise warning mark lwa 98 mark clutch mark (large) "handle with care" label "cutting warning" label groomer mode selector grease up 10h mark brak...
Page 19
18 ①use only unleaded gasoline. ②read the owner's manual. ③keep a safe distance from the machine. ④do not open or remove safety shields while engine is running. ⑤stop the engine and wait for moving parts to stop. ⑥it is strongly advised that the operators of this machine wear ear defenders for their...
Page 24
Head office 1-26, miyuki-cho, toyokawa, aichi-pref. 442-8530 japan. Turf care machinery tel : (0533)84-1390 fax : (0533)89-3623 lm56ga--um--gbz/10d-00-ozeki.