Barracuda RV8 Manual - Status Lights
System 3
4-15
RV8 Barracuda
Status Lights
The status lights indicate the state of the RV8. Armed, Running, (DoCount), and
FreeRun. Combinations of the status light describe the state of the RV8.
Digital Input Lights
Lights are on when there is a TTL pulse on the digital input line. Pulse times may
be too brief to see in many cases. Only channels 0-7 have indicator lights.
Digital Output Lights
Lights are on when a TTL pulse is sent out of a digital output line. All eight
channels (0-7) have a TTL indicator light.
25‐pin Connector for Digital Inputs and Outputs
A 25-pin connector gives access to all 24 channels of digital I/O. The pin outs for
the connector are shown in “Barracuda Technical Specifications” on page 4-21. TDT
provides the PP16 with 24 connectors to give users easy access to all the digital
output channels of the Barracuda.
Barracuda Device Setup
The Barracuda has several additional features not found in other RP devices. An
expanded dialog box opens after selecting the RV8 option.
Free Run Mode
Free Run Mode w/
Circuit Running
Trigger Mode
Trigger Mode with
System Armed
Trigger Mode with
System Running: