1. DL manuals
  2. Barranca Diamond
  3. Sander
  4. BD-2321WR
  5. Owner's Manual And Operating Instructions

Barranca Diamond BD-2321WR Owner's Manual And Operating Instructions

Manual is about: Pneumatic Wet Polisher

Summary of BD-2321WR

  • Page 1

    Bd-2321wr pneumatic wet polisher owner’s manual and operating instructions caution: read all safety and operating instructions before using this equipment. This manual must accompany the equipment at all times. Revision 100 manual part # 160458-om 11.2017 barranca diamond products, inc. 1315 storm p...

  • Page 2

    2 introduction congratulations on your purchase of a bd-2321wr wet stone polisher. We are certain that you will be pleased with your purchase. Barranca diamond takes pride in producing the finest construction power tools and diamond blades in the industry. In order to help you, we have included this...

  • Page 3

    3 bd-2321wr safety read and follow all safety, operating and maintenance instructions. Failure to read and follow these instructions could result in injury or death to you or others. Failure to read and follow these instructions could also result in damage and/or reduced equipment life. Safety warni...

  • Page 4

    4 on ( ( ) ) on ( ( ) ) all visitors and children should be kept a safe distance from work area. Maintain a safe operating distance to other personnel. Keep children away make the workshop kid proof make the workshops kid proof by using padlocks, master switches or by removing starter keys. Rotating...

  • Page 5

    5 consult the owner’s manual for recommended accessories. Using improper accessories may increase the risk of personal or by-stander injury. Unauthorized equipment modifications will void all warranties. Manufacturer does not assume responsibility for any accident due to equipment modifications. Use...

  • Page 6

    6 turn power off - do not leave a tool until it comes to a complete stop. Always turn a power tool off when leaving the work area, or, when a cut is finished. Never leave a tool unattended never disconnect any "emergency or safety devices". These devices are intended for operator safety. Disconnecti...

  • Page 7

    7 sawing, grinding and drilling generate dust. Excessive airborne particles may cause irritation to eyes, skin and respiratory tract. To avoid breathing impairment, always employ dust controls and protection suitable to the material being sawed or drilled; see osha (29 cfr part 1910.1200). Warning c...

  • Page 8

    8 bd-2321wr safety product specifications the barranca diamond bd-2321wr pneumatic wet polishing tool is designed for continuous produc- tion applications and improved safety. Cast from aircraft aluminum, the bd-2321wr is one of the most durable tools of its kind on the market for polishing stone. T...

  • Page 9

    9 bd-2321wr unpacking unpacking your bd-2321wr wet stone polisher has been shipped from the factory thoroughly inspected. Only minimal assembly is required. In your container, you will find one (1) bd-2321wr, one (1) d-handle w/screws, one (1) air, water & exhaust hoses, one (1) hose fastener, one (...

  • Page 10

    10 bd-2321wr assembly (a) attach the hose nipple to the water hose. (d) thread the water hose to the water hose fitting. (g) use the fastener to secure exhaust hose to polisher. (e) tighten the water hose nut. (h) attach water hose joint to end of water hose. (f) slide the exhaust hose over the wate...

  • Page 11

    11 maintenance (a) use 3-4 drops of spindle/machine oil in the air intake valve. The pol- isher must be oiled daily. (j) screw on backer plate. (m) turn the air on to the desired rotation speed. Beginning polishing. (b) grease gears as needed using a multi-purpose ep lithium grease or moly ep lithiu...

  • Page 12

    12 bd-2321wr troubleshooting (a) wear in front plate due to worn bearings. (b) wear in the bevel gear is due to using the polisher as a grinder and applying heavy pressure and hammering the tool onto the material. (c) wear in pinion gear is due to using polisher as a grinder, hammering the tool onto...

  • Page 13

    13 bd-2321wr exploded view bd-2321wr wet polisher p/n 160458.

  • Page 14

    14 item description part# qty. 1 inlet bushing 180-1 161461 1 2 nipple hose #1110a-62 161690 1 3 adapter,hose,1110a-22 161320 1 4 screw, cap, #z832-160 161850 4 5 washer,hsw-40 162004 4 6 pipe, outer # 1110-9 161749 1 7 bushing, pipe, #1110-1 161451 2 8 o-ring, #p-4 161732 3 9 screw,cap,#z-m30-80 16...

  • Page 15

    15 item description part # qty. 43 o-ring, s-7 161734 1 44 plug, grease, #1110a-6 161760 1 45 bearing, ball, #608llu 161354 1 46 gear, bevel, #110a-13 161569 1 47 bearing ball # 6302llu 161360 1 48 spindle, 5/8-11, #1110a-11u 161928 1 49 key, 940-46 161647 1 50 oil seal, #g23-32-7 161719 1 51 cap, s...

  • Page 16

    16 polishing pads are designed to achieve a monument quality finish on all straight or shaped surfaces. The unique design of the polishing pads allows for rapid and even surface removal rates of the mate- rial being polished with minimal effort. When used correctly, these pads provide a clear advant...

  • Page 17

    17 bd-2321wr accessories accessories item number description product 1 various, see catalog or visit our web site at: www.Barrancadiamond.Com or call 800.421.5830 polishing discs 2 370050 bd-370bp 5" rubber backer plate 3 370052 bd-370bp 5" aluminum backer plate 4 370051 bd-370bp 5" rigid backer pla...

  • Page 18

    18 barranca diamond warrants to the original retail purchaser for a period of 90 days except as noted, from the date of purchase all products covered by this warranty to be free of defects in materials and workmanship. This warranty shall not apply to any parts that have been subjected to misuse or ...

  • Page 19

    19 bd-2321wr ordering & return replacement parts replacement parts for this tool may be ordered from your barranca diamond distributor or directly from bar- ranca diamond. Please have the following information ready before calling: • model and serial number of the machine • date of purchase • descri...

  • Page 20

    Barranca diamond products, inc. 1315 storm parkway torrance, ca 90501 toll-free: (800) 421-5830 phone: (310) 539-5221 fax: (310) 539-5158 www.Barrancadiamond.Com.