1. DL manuals
  2. Barreto
  3. Tiller
  4. 1320H
  5. User's Information Manual

Barreto 1320H User's Information Manual

Manual is about: HYDRAULIC REAR TINE TILLERS

Summary of 1320H

  • Page 1

    916 - 918 owners manual.Doc 4/22/08 page 1 of 9 the model 916/918 hydraulic rear tine tiller congratulations! You are now the proud owner of the barreto model 916/918 tiller. Please take a moment of your time to look over the following information. Familiarize yourself with the tiller, its character...

  • Page 2

    916 - 918 owners manual.Doc 4/22/08 page 2 of 9 assembly instructions 1. Remove tiller from shipping crate. 2. Screw the handle bar adjustment crank into the lower handle bar adjuster pin. 3. Fasten handle bar to tiller using the 1/2" x 3" bolt supplied. 4. Adjust clutch cable by removing all slack ...

  • Page 3

    916 - 918 owners manual.Doc 4/22/08 page 3 of 9 service information 1. Check reservoir level using sight glass on the left side of the tank. If required, add to reservoir with tractor transmission hydraulic oil (shell donax td fluid or comparable). Recheck oil level after the tiller has been run and...

  • Page 4

    916 - 918 owners manual.Doc 4/22/08 page 4 of 9 operating instructions 1. Read safety instructions before operating! 2. Be sure engine oil and hydraulic oil are at proper levels before starting tiller. 3. Study and understand controls before beginning operation. 4. Never run machine in reverse while...

  • Page 5

    916 - 918 owners manual.Doc 4/22/08 page 5 of 9 safety instructions 1. Read safety and operating instructions before operating! 2. Do not leave tiller unattended with engine running. 3. Always park on level surface, never on an incline. 4. Use extreme caution if transporting tiller down any incline,...

  • Page 6

    916 - 918 owners manual.Doc 4/22/08 page 6 of 9 barreto manufacturing, inc. Equipment warranty barreto manufacturing, inc. Warrants all barreto equipment to be free of defects in material and workmanship for a period of one (1) year, dating from delivery to the original user. This warranty is in lie...

  • Page 7

    916 - 918 owners manual.Doc 4/22/08 page 7 of 9 916/918 tiller trouble shooting guide caution: always use extreme care when trouble shooting or making adjustments on the tiller. Stay clear of tines when engine is running. Always shut the engine off before disassembling any component. A. Entire hydra...

  • Page 8

    916 - 918 owners manual.Doc 4/22/08 page 8 of 9 916/918 tiller trouble shooting guide (continued) b. Tines fail to rotate but wheels drive. 1. Clutch cable stretched so needs adjustment 2. Tine motor worn. Remove cable slack then adjust for 7/16” to 1/2" movement at actuator lever pin. Rebuild or re...

  • Page 9

    916 - 918 owners manual.Doc 4/22/08 page 9 of 9 916/918 tiller trouble shooting guide (continued) e. Oil leaks in hydraulic system. 1. Fittings are loose. 2. Worn or broken hoses. 3. Oil around tine motor shaft tighten as required replace as necessary inspect tine motor for leaking shaft seal. Rebui...