Barska Edge SoundDeck TR-100 User manual - page 5
5
w w w . b a r s k a A u d i o . c o m
Connect Speaker to TV
1. Speaker status light shows stable green light, press Sound
Source and Mute buttons at the same time. Then, status
light turns to “flashing” orange light
2. Press mute button on speaker once, status light becomes
“stable” orange light
3. Press TV remote control mute button 4 times slowly (within
1 ft’ distance from speaker), status light on speaker turns from
flash green light to stable green light.
Follow above steps to setup speakers with home TV remote.
If setup fails, try to use TV set directly or cable TV remote control to
connect.
Remote Control
Buttons
Light Signals
Color
On
Flash
Red
Power Off, Stand by mode
Flash once
3D surround sound is off
Green
Power On, by Optical power input
Flash once
3D surround sound is on
Orange
Power On, by Analog RCA power input
n/a
Blue
Power On, by Bluetooth power input
Flashes frequently
waiting for Bluetooth connection
Stand By Mode
When the TV power is off, after 10 minutes, Edge Sound Deck will be automatically on stand by mode. Light signal on
speaker will turn red. When the TV or cable box power is on, Edge Sound Deck will turn on automatically.
speaker_manual_BC385.indd 5
3/25/14 2:37 PM