Elite-200 edition metal detector 8/15 bc437 elite-200 edition metal detector.
2 3 notes before use - this metal detector is a professional metal detector. As a sophisticated electronic device, the most difficult aspects in metal detecting have been preset. - if you are new to using metal detectors, it is recommended to set the sensitivity to a low level in the event of false ...
4 5 assembling assembling your detector is easy and requires no special tools. 1. Insert the latch on the top of the handle into the assembly hole on the bottom of the control box. Then slightly push the control box in the direction of in marked on the handle to fix the latch in place. Secure the co...
6 7 control panel lcd display phone insert the headphones’ plug of 3.5mm into the phone jack for private listening. Volume/power adjusts the volume level and turns on or off the unit. Control buttons notch press notch, then + or – to select the target to be notched. The cursor above the selected tar...
8 9 2. If you don’t press the buttons (disc,+,-) within about 2 seconds, the detector will enter the standby state. (2) notch: press notch, then + or – to select the target to be notched. The cursor above the selected target will flash. Press notch again, the target name below the cursor will disapp...
10 11 outdoor testing and use 1. Rotate the volume switch clockwise away from off to power on the detector. 2. Follow the steps of 2 described in section of indoor testing and use to set the operating mode. 3. Find an area on the ground outside where there is no metal. 4. Place a sample of the mater...
12 13 factors that affect the detecting it’s difficult to have an accurate detecting result. Sometimes the detecting may be restricted by some factors: - the angle of the target buried in the soil. - the depth of the target. - the level of oxidization of the target. - the size of the target. - elect...
