Bartec MC 9090ex-G User Manual - 3.8

Other manuals for MC 9090ex-G: User Manual, User Manual

Summary of MC 9090ex-G

  • Page 1

    Gmbh max-eyth-straße 16 phone: +49 7931 597-0 contact: 97980 bad mergentheim fax: +49 7931 597-183 support-polaris@bartec.De germany user manual mobile computer mc 9090 ex -g type 17-a129-0g.0/h….. Mobile computer mc 9090 ex -k type 17-a129-0k.0/h….. Ul version version 3.00 status: june, 19 th 2007 ...

  • Page 3

    Indroduction page 5 before commissioning the devices, please read through the relevant documents carefully. Target group: experienced and trained specialists acting in compliance with the nec 500, iec 60079-19 and iec 60079-17. This user manual contains important information, safety instructions and...

  • Page 5

    Contents mobile computer mc 9090 ex page 7 1. Product description ..................................................................................................................................10 1.1 general ............................................................................................

  • Page 6

    Inhaltsverzeichnis page 8 4. Commissioning .........................................................................................................................................33 4.1 mobile computer.....................................................................................................

  • Page 7

    Contents mobile computer mc 9090 ex page 9 7. Maintenance ..............................................................................................................................................51 7.1 care of the battery ............................................................................

  • Page 8: 1.  Product Description

    User manual mobile computer mc 9090 ex page 10 1. Product description 1.1 general the mc 9090 ex -g and mc 9090 ex -k mobile computers each form a compact unit for high-standard barcode scanning in hazardous (potentially explosive) areas. The comfortably positioned scan trigger and the ergonomic des...

  • Page 9: 1.2

    Mobile computer mc 9090 ex page 11 1.2 use the mobile computer is a hand-guided electrical device used for the mobile acquisition, processing and radio transmission of data in hazardous areas. The mobile computer is used in areas of class i div 1. The mc 9090 ex series is specially intended for use ...

  • Page 10: 2.  Safety Instructions

    User manual mobile computer mc 9090 ex page 12 2. Safety instructions 2.1 warnings about the mobile computers w a r n i n g s ■ the device may not be opened by the user outside the hazardous area either! The user may not make any alterations to the device. Do not exchange or replace components and d...

  • Page 11: C A U T I O N

    Mobile computer mc 9090 ex page 13 c a u t i o n ■ do not open or charge the device and do not exchange any data through the "cradle contacts" on the battery in the hazardous area! Operating the 17-pin data interface (see chapter 3.5 "technical data battery, article "external battery contacts") is o...

  • Page 12: A T T E N T I O N

    User manual mobile computer mc 9090 ex page 14 a t t e n t i o n equipment that is damaged in any way or that does not function proberly must instantly be removed from the hazardous area and sent in for inspection/repair! ■ take the device out of the hazardous areas before wiping it with a dry cloth...

  • Page 13: 2.2

    Mobile computer mc 9090 ex page 15 2.2 warnings for battery w a r n i n g ■ the battery may only be charged outside the hazardous area! ■ it must be ensured that only original batteries of the type 17-a1z0-0002 with 7.4 v/2200 mah are used in safety-oriented operation. The use of imitation batteries...

  • Page 14: 2.3

    User manual mobile computer mc 9090 ex page 16 2.3 warnings about laser devices devices equipped with symbol lasers conform to the us 21cfr1040.10 and iec 825-1:1993, en 60825-1:1994+a11:1996 standards. The laser classification is marked on one of the labels on the device. Class 1 laser devices are ...

  • Page 15

    Mobile computer mc 9090 ex page 17 ■ servicing regular servicing is not necessary if the equipment is operated correctly in accordance with the installation instructions and environmental conditions. ■ inspection in accordance with iec 60079-19 and en 60079-17, the owner-operator of the electrical i...

  • Page 16: 2.5

    User manual mobile computer mc 9090 ex page 18 2.5 electromagnetic fields 2.5.1 international the device complies with internationally recognised standards covering human exposure to electromagnetic fields from radio devices. Reducing rf exposure - use properly only operate the device in accordance ...

  • Page 17: 2.6

    Mobile computer mc 9090 ex page 19 2.6 health and safety recommendations use only the accessories, batteries and battery chargers approved by bartec. Do not attempt to charge damp/wet mobile computers or batteries. All components must be dry before being connected to an external power supply point. ...

  • Page 18: 2.7

    User manual mobile computer mc 9090 ex page 20 2.7 warnings for use of wireless devices please observe all warning notices with regard to the usage of wireless devices. 2.7.1 safety in aircraft switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your ...

  • Page 19

    Mobile computer mc 9090 ex page 21 2.7.5 radio frequency interference requirements-fcc note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmf...

  • Page 20: 3.  Technical Data

    User manual mobile computer mc 9090 ex page 22 3. Technical data 3.1 explosion protection type : 17-a129-0g.0/h...... And 17-a119-0k.0/h...…. Ex protection type : class Ι div 1 groups c and d, t4 ex ia certification : file no. E226123 3.2 general data dimensions (height x width x depth) type 17-a119...

  • Page 21

    Mobile computer mc 9090 ex page 23 interfaces : rs232, max. 115.2 kbps, min. 1200 bps usb vers. 1.1 (client) keypad versions : "gun" version and "brick" version as an alternative, the 53-key version is also available with emulation key printing 28 keys 43 keys 53 keys no emulation software is instal...

  • Page 22: 3.3

    User manual mobile computer mc 9090 ex page 24 3.3 technical data scan engine and decode zone 3.3.1 scan engine for type 17-a129-0gj0/h...... (long range scan engine) laser diode : visible red light 650 nm scan rate : 35 scans / sec. ± 5 (bi-directional) scan angle : 13.5° ± 0.7° laser safety : devi...

  • Page 23

    Mobile computer mc 9090 ex page 25 3.3.2 scan engine für typ 17-a129-0ka0/h...... (standard range scan engine) laser diode : visible red light 650 nm scan rate : 104 scans / sec. ± 12 (bi-directional) scan angle : 47° ± 3° standard 35° ± 3° reduced laser safety : devices in cdrh class ii / iec 825 c...

  • Page 24

    User manual mobile computer mc 9090 ex page 26 3.3.3 scan engine for type 17-a12.-0kk0/h...... (imager) illumination element (led) : visible red light 635 nm +/- 20 nm target element (vld) : visible red light 635 nm +/- 20 nm field of vision : horizontal 32,2 ° vertical 24,5 ° laser safety : devices...

  • Page 25: 3.4

    Mobile computer mc 9090 ex page 27 3.4 technical data wlan / wpan wlan (integrated radio module) radio standard : ieee 802.11a/b/g (direct sequence topologie) data rate : ieee802.11a: up to 54 mbit/sek. Ieee802.11b: up to 11 mbit/sek. Ieee802.11g: up to 54 mbit/sek. Frequency range : ieee802.11a: 5 ...

  • Page 26: 3.5

    User manual mobile computer mc 9090 ex page 28 3.5 technical data battery battery : type 17-a1z0-0002 (only rechargeable in the safe range) lithium ion 7.4 v / 2200 mah operating temperature when charging : 0 °c to +40 °c 32 °f to 104 °f when discharging : -20 °c to +40 °c -4 °f to 104 °f storage te...

  • Page 27: 3.6

    Mobile computer mc 9090 ex page 29 3.6 product marking 3.6.1 mobile computer mc 9090 ex warning laser caution - class 3r laser light when open. Avoid direct eye exposure. Attention - lumiÈre laser de classe 3r, en cas d’ouverture. Exposition dangereuse au faisceau. Vorsicht - laserlicht klasse 3r, w...

  • Page 28: 3.7

    User manual mobile computer mc 9090 ex page 30 3.7 laser labels in accordance with clause 5, iec 825 and en60825, the following information is provided to the user: deutsch klasse 1 klasse 1 laser produkt klasse 2 laserlicht nicht in den laserstrahl sehen klasse 2 laser produkt english class 1 class...

  • Page 29: 3.8

    Mobile computer mc 9090 ex page 31 3.8 wlan / bluetooth 3.8.1 radio modules the device contain approved radio module(s). These module(s) are identified below. ■ symbol modular rlan radio card, type(s): 21-21160 ■ symbol bluetooth terminal, model: mc9090 3.8.2 products equipped with bluetooth® wirele...

  • Page 30

    User manual mobile computer mc 9090 ex page 32 if using wlan in accordance with ieee802.11b (2.4 ghz) in the european economic area the following restrictions must be observed: the maximum radiated transmitting power of 100 mw eirp in a frequency range of 2,400 to 2,4835 ghz france devices are subje...

  • Page 31: 4.  Commissioning

    Mobile computer mc 9090 ex page 33 4. Commissioning 4.1 mobile computer to ensure that the devices function perfectly and have a long service life, they must be handled carefully. Chapter 5 "handling" explains how to avoid inappropriate handling (e.G. By letting fall, damaging with objects). Use the...

  • Page 32: 4.3

    User manual mobile computer mc 9090 ex page 34 4.3 battery only battery type 17-a1z0-0002 with 7,4 v / 2200 mah can be used in the hazardous zone and may therefore be changed or replaced. The mobile computer can be charged using a cradle or a charging station. Note that battery type 17-a1z0-0002 wit...

  • Page 33

    Mobile computer mc 9090 ex page 35 4.3.3 power supply use only the power packs approved by bartec/motorola (50-14000-148, 12 vdc and at least 3,33 a). The power pack is certified in accordance with en60950-1 and has selv outputs. The use of other power packs invalidates the permits granted for these...

  • Page 34: 4.4

    User manual mobile computer mc 9090 ex page 36 4.4 installing battery do not remove the battery during the first 15 hours of operation. There is a risk of losing data if the battery is removed. Sliding the battery into the mobile computer as shown in figure ensure the battery is fully inserted. Two ...

  • Page 35: 5.  Handling

    Mobile computer mc 9090 ex page 37 5. Handling make sure that the mobile computer is set down on a stable supporting surface. Avoid putting it down on places such as e.G. Tables, trolleys, stands or holders if they are not stable. 5.1 mobile computer mc 9090 ex -k in this position the device cannot ...

  • Page 36: 5.2

    User manual mobile computer mc 9090 ex page 38 5.2 mobile computer mc 9090 ex -g in this position the device cannot be protected against damage. The scanner window can be damaged by objects lying on the supporting surface. In this this position the device cannot be protected against damage. The disp...

  • Page 37: 5.3

    Mobile computer mc 9090 ex page 39 5.3 battery 5.3.1 battery informationen bartec rechargeable battery packs (type 17-a1z0-0002) are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing rep...

  • Page 38

    User manual mobile computer mc 9090 ex page 40 charging the battery in the mobile computer care must be taken that the devices to be charged are inserted into the charging station in the direction of the arrow. The mobile computer starts the charging process automatically. The yellow charging led in...

  • Page 39: 5.4

    Mobile computer mc 9090 ex page 41 5.3.3 tips on optimising the operating time ■ leave the mobile computer connected to ac power at all times when not in use. ■ set the mobile computer to turn off after a short period of non-use. ■ set the display and keyboard backlight to turn off after a short per...

  • Page 40

    User manual mobile computer mc 9090 ex page 42 5.4.2 changing the display backlight settings to change the display backlight settings in order to conserve more battery power: ¨ tap start > settings > system tab > backlight icon > battery power tab ¨ select the on battery power: disable backlight if ...

  • Page 41

    Mobile computer mc 9090 ex page 43 5.4.5 waking the mobile computer the wakeup conditions define what actions wakeup the mobile computer. These settings are configurable and the factory default settings shown in the following table are subject to change/update. Table wakeup conditions (default setti...

  • Page 42: 5.5

    User manual mobile computer mc 9090 ex page 44 5.5 mobile computer booten 5.5.1 windows mobile 5.0 devices if the functions stop working when you are using the mobile computer, it is recommendable to reboot the device. There are two reset functions, warm boot and cold boot. A warm boot restarts the ...

  • Page 43

    Mobile computer mc 9090 ex page 45 to perform a cold boot on a mc9090-g: 1. Press the primary battery release on the mobile computer to partially eject the battery from the mobile computer. 2. On an mc9090-g, while the battery is partially released, simultaneously press and release the trigger and t...

  • Page 44: 6.  Additional Components

    User manual mobile computer mc 9090 ex page 46 6. Additional components 6.1 keypad and cd card 6.1.1 keypad with blue overlay options order number 28 keys 05-0080-0388 43 keys 05-0080-0389 53 keys 05-0080-0390 53 keys keypad coding for vt emulation 05-0080-0391 53 keys keypad coding for 3270 emulati...

  • Page 45

    Mobile computer mc 9090 ex page 47 6.1.3 removing/changing the keypad the keypad and sd card may only be replaced outside the hazardous area! 1. Turn off the mc 9090 ex . 2. Remove the battery (see chapter 5.3.2 "charging processes"). 3. Take out the screws at the top edge of the keypad. Fig. 1: rem...

  • Page 46

    User manual mobile computer mc 9090 ex page 48 7. Snap on the keypad in the direction of the arrow (see fig. 4) and push it upwards until the boreholes for the screws are over the threaded sleeves. Fig. 4: changing the keypad 8. Check that the keypad is mounted correctly. Figure 5: keypad mounted in...

  • Page 47

    Mobile computer mc 9090 ex page 49 6.1.4 inserting/replacing the sd card the hardware status of the sd cards is specified in the test certificate. Accordingly only the sd cards with the order number 17-28be-f006/000x are to be used. 1. Take off the keypad as instructed in chapter 6.1.3; repeat steps...

  • Page 48: 6.2

    User manual mobile computer mc 9090 ex page 50 6.2 stylus 6.2.1 stylus for mc 9090 ex -k order number for stylus ( yellow): 3-pack 3-pack 10-pack 10-pack stylus with holder 3-pack 3-pack 50-pack 50-pack 6.2.2 stylus for mc 9090 ex -g order number for stylus (grey): 10-pack 10-pack 50-pack 50-pack st...

  • Page 49: 7.  Maintenance

    Mobile computer mc 9090 ex page 51 7. Maintenance 7.1 care of the battery the battery should be completely charged before it is used for the first time. Note that the maximum capacity of the battery is not attained until after approx. 5 - 6 charging and discharging cycles. As the battery power dimin...

  • Page 50: 8.  Additional Information

    User manual mobile computer mc 9090 ex page 52 8. Additional information 8.1 links http://www.Bartec-group.Com bartec homepage http://www.Symbol.Com motorola homepage http://www.Symbol.Com/ the motorola site for the mc 9000 ¨ support and resources ¨ product manuals ¨ mobile computers ¨ mc 9090 wm ht...

  • Page 51: 8.2

    Mobile computer mc 9090 ex page 53 8.2 accessories designation order number motorola order number bartec accessories for the hazardous zone ex accessory: battery spare battery for devices with ul approval 17-a1z0-0002 ex accessory: sd card for atex and ul version atp industrial grade sd card with 51...

  • Page 52

    User manual mobile computer mc 9090 ex page 54 designation order number motorola order number bartec accessories for the non-hazardous area single slot cradle set: - 05-0079-0018 consists of: single slot cradle crd9000-1001sr 03-9915-0003 power pack 50-14000-148r 03-9911-0015 rs232 cable (cradle pc)...

  • Page 53: 8.3

    Mobile computer mc 9090 ex page 55 8.3 order numbers 17-a129-0g…0/hj…fa6…0 j lorax 1d long range scan engine (se 1524) a 28 key tastatur (mobile phone keypad) f 43 key tastatur (with function keys f1 – f12 in direct access) e 53 key tastatur (alphanumeric keypad) g 53 key tastatur with printing for ...

  • Page 54: 17-A129-0K…0/hj…Fa6…0

    User manual mobile computer mc 9090 ex page 56 17-a129-0k…0/hj…fa6…0 a 1d standard range scan engine (se950) k 2d imager (se1440) a 28 key tastatur (mobile phone keypad) f 43 key tastatur keypad (with function keys f1 – f12 in direct access) e 53 key tastatur (alphanumeric keypad) g 53 key tastatur ...

  • Page 55: 9.  Transport and Shipment

    Mobile computer mc 9090 ex page 57 9. Transport and shipment important note concerning transport and shipping ! Sensitive devices ! It is absolutely necessary to deliver the equipment in the original packaging in order to avoid damage to the equipment..

  • Page 56: 10.  Certificates

    Mobile computer mc 9090 ex page 58 10. Certificates.

  • Page 57

    Mobile computer mc 9090 ex page 59.