Barton RCL-4002 Operation Manual - page 17
TRANSFERS
CHAIR TO BED TRANSFER
1.
Choose the appropriate sling for your resident and place it under them.
(For
more information on using slings please see the Slings section of this manual).
2.
Adjust the legs of the Ready Care Lift to straddle the chair. Use your left foot to
push the left pedal of the leg adjustment to widen the legs to the correct width.
The leg assembly has three width positions.
3.
Lower the lift arm assembly by using the hand control, to enable you to attach
the sling to the hanger.
4.
Raise the resident by using the hand control.
5.
Transfer the resident to the bed and raise them high enough to clear the bed.
6.
Position the resident over the centre of the bed and lower them using the hand
control.
7.
Unhook the sling and move the Ready Care Lift away.
8.
Turn the resident on their side and turn the sling towards their back. Turn the
resident onto their other side and remove the sling.
15