Summary of IK 235Z
Page 1
Ik 235z 105.838 v1/1011.
Page 2: Gb/uk
- 17 - 1. General information 18 1.1 information about the instruction manual 18 1.2 key to symbols 18 1.3 liability and warrantees 19 1.4 copyright protection 19 1.5 declaration of conformity 19 2. Safety 20 2.1 general information 20 2.2 safety instructions for use of the device 20-21 2.3 intended...
Page 3: 1. General Information
- 18 - 1. General information 1.1 information about the instruction manual this instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructi...
Page 4: 1.4 Copyright Protection
- 19 - 1.3 liability and warrantees all the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due ...
Page 5: 2. Safety
- 20 - 2. Safety this section provides an overview of all important safety aspects. In addition every chapter provides precise safety advice for the prevention of dangers which are highlighted by the use of the above mentioned symbols. Furthermore, attention should be paid to all pictograms, markers...
Page 6: 2.3 Intended Use
- 21 - caution! O the device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regardin...
Page 7: 3.1 Delivery Check
- 22 - 3. Transport, packaging and storage 3.1 delivery check please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery....
Page 8: 4. Technical Data
- 23 - 4. Technical data 4.1 technical specification name induction cooker ik 235z article no: 105.838 made of: stainless steel housing, glass cooking surface power levels: 10 (800 – 3500 w / 800 - 3500 w) total power connection: 3 nac 400 v / 7,0 kw dimensions: width 405 x depth 700 x height 138 mm...
Page 9: 5.2 Safety Instructions
- 24 - 5. Installation and operation 5.1 functionality of induction cookers with induction cooker, an electric voltage is applied on a conductor spool beneath the glass. This creates magnetic fields, which directly heat up the bottom of the cookware through a physical effect. This means saving time ...
Page 10
- 25 - • do not use the device in case it does not function properly, has been damaged or dropped. • do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the w...
Page 11
- 26 - 5.3 suitable and unsuitable cookware suitable cookware o steel or enamelled cast iron; o iron, steel or non-enamelled cast iron; o 18/0 stainless steel and aluminium, if it is marked as suitable for induction (follow the description of the cookware). For proper functioning, all pots and pans ...
Page 12: Setting Up
- 27 - 5.4 installation and connection setting up o unpack the induction cooker and remove all packing material. O place the device on a flat, safe surface which supports the weight and is not sensitive to heat. O never place the device on a combustiblesurface (such as a tablecloth, etc.). O do not ...
Page 13: 5.5 Operating
- 28 - 5.5 operating control panel digital display ① setting point of rear cooking plate ② setting point of front cooking plate ③ knob of front cooking plate ④ knob of rear cooking plate ⑤ digital display of rear cooking plate ⑥ digital display of front cooking plate ① ② ⑥ ④ ③ ⑤.
Page 14
- 29 - turning on the device • before turning on the device, set both knobs in the off position ( „0“ mark of the knob positioned at the setting point). • place an appropriate cooking pan in the middle of the selected cooking plate. Warning! Never place an empty pan on the cooking plate. Warming up ...
Page 15: 6.1 Safety Advice
- 30 - • the power sharing is determined in such a way that both cooking plates operate simultaneously with an output of 3500 w every time. • to be able to set the device at the maximum output, both cooking plates must be turned on. It is then possible to use the rear cooking plate at an output of 2...
Page 16: 6.2 Cleaning
- 31 - 6.2 cleaning o clean the device regularly. O clean the cooking surface, control panel and housing with a soft damp cloth and with a mild, and not an abrasive cleaning agent. O always protect the rear vents of the device against dirt and dust or clean them (using a brush or air blower). O neve...
Page 17: 8. Waste Disposal
- 32 - error message cause solution e2 • the overheating protection has activated, the device will turn off. • remove cookware from the induction plate. Leave the device to cool for several minutes. It will soon be ready for further use. E3 • temporary power surge • remove the device’s plug from its...