Summary of Salamander 500
Page 1
Salamander 500 151510 salamander 600 151511 v5/0814.
Page 2: Gb/uk
- 15 - english translation of the original instruction manual read these instructions before using and keep them available at all times! 1. General information ................................................................................................ 16 1.1 information about the instruction ma...
Page 3: 1. General Information
- 16 - 1. General information 1.1 information about the instruction manual this instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructi...
Page 4: 1.4 Copyright Protection
- 17 - 1.3 liability and warrantees all the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due ...
Page 5: 2.Safety
- 18 - 2.Safety this section provides an overview of all important safety aspects. In addition every chapter provides precise safety advice for the prevention of dangers which are highlighted by the use of the above mentioned symbols. Furthermore, attention should be paid to all pictograms, markers ...
Page 6: 2.3 Intended Use
- 19 - caution! O children should be observed to ensure that they are not playing with the device. O please keep these instructions and give them to future owners of the device. O all people using the device should follow the instructions and tips contained in these instructions. O only use the devi...
Page 7: 3.1 Delivery Check
- 20 - 3. Transport, packaging and storage 3.1 delivery check please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery....
Page 8: 4. Technical Data
- 21 - 4. Technical data 4.1 overview of parts 151510 151511 ③ ⑤ ⑥ ⑦ ⑨ ⑨ ⑧ ⑩ ⑤ ⑤ ⑥ ⑥ ④ ③ ① ⑨ ⑧ ⑦ ⑩ ⑨ ④ ④ ① ② ① handle ② height-adjustable upper section ③ stainless steel grill ④ heating control light (orange) ⑤ temperature regulator ⑥ network control light (green) ⑦ feet ⑧ lower section ⑨ ventilatio...
Page 9: 5.1 Safety Instructions
- 22 - 4.2 technical specification name electric lift salamander code-no.: 151510 151511 model: 500 (1 heating area) 600 (2 heating areas) construction: stainless steel temperature range: 0 °c to 400 °c power: 2.8 kw / 230 v 50/60 hz 4.0 kw / 400 v 50/60 hz dimensions: w 470 x d 510 x h 530 mm w 600...
Page 10
- 23 - • do not move or tilt the device when in operation. • never use the device with wet or moist hands. • never leave the device unattended when in use. 5.2 installation and connection attention! Any installation, maintenance and repair work should be executed only by an authorized installation e...
Page 11: 5.3 Operation
- 24 - • do not place flammable acidic or alkaline materials near the device, as they may shorten the device’s life span as well as cause a fire hazard when the device is in use. • do not place anything on the device. С onnection warning! Hazard via electrical current! The device can cause injuries ...
Page 12
- 25 - starting the device • ensure that the temperature regulator is set to the position marked „off”. • prior to first use clean the device (see sec. 6.2 “cleaning”) • connect the device to a single grounded socket (this does not apply to the dual model 151511). • when the device is connected to t...
Page 13: 6.1 Safety Advice
- 26 - 6. Cleaning and maintenance 6.1 safety advice o before beginning with repair or cleaning works make sure the device has been disconnected from power supply and has cooled down. O do not use any acid agents and make sure no water ingresses the device. O to protect yourself from electric shock,...
Page 14: 7. Possible Malfunctions
- 27 - 7. Possible malfunctions problem cause solution the network control light doesn’t come on. • device not plugged in • electricity is disconnected • damaged network control lamp • insert plug into socket • check electrical connections • contact your sales agent device is plugged in, temperature...
Page 15: 8. Waste Disposal
- 28 - 8. Waste disposal discarding old devices at the end of its service life the discarded device has to be disposed in accordance with the national regulations. It is advisable to contact a company which is specialized in waste disposal, or just contact the local disposal service in your communit...