- DL manuals
- Base Line
- Modem
- 3G Cell Modem
- Installation And User Manual
Base Line 3G Cell Modem Installation And User Manual
Summary of 3G Cell Modem
Page 1
3g cell modem installation and user guide for basestation 1000 & basestation 3200 irrigation controllers in pedestal enclosures june 16, 2014 customer service 1-866-294-5847.
Page 2: Baseline Inc.
Baseline inc. Www.Baselinesystems.Com phone 208-323-1634 fax 208-323-1834 toll free 866-294-5847 ©2014 baseline inc. All rights reserved. Fcc compliance information this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. ...
Page 3: Table Of Contents
Table of contents introduction ....................................................................................................................... 1 gather the following tools and materials .......................................................................... 1 step 1 – assemble the antenna...
Page 5: Introduction
Installation and user guide for baseline cell modems in pedestal enclosures introduction in order to remotely connect with your basestation 1000 or 3200 irrigation controller and take advantage of basemanager, the controller must be able to communicate over the internet. Using a cell modem is one op...
Page 6
Installation and user guide for baseline cell modems in pedestal enclosures step 1 – assemble the antenna riser note: if you are not able to get a strong signal with the antenna that comes with the package, other options are available. Contact baseline support at 866-294-5847. 1. Remove the antenna ...
Page 7: Riser
Installation and user guide for baseline cell modems in pedestal enclosures step 2 – prepare the mounting location for the antenna riser 1. Open and remove the front door on the lower part of the pedestal. 2. On the inside left wall of the pedestal, remove the nuts from the bolts that secure the cov...
Page 8
Installation and user guide for baseline cell modems in pedestal enclosures step 3 – attach the antenna riser to the pedestal 1. Align the holes at the bottom of the antenna riser with the holes in the gasket at the mounting location on the outside left wall of the pedestal. 2. Feed the free end of ...
Page 9
Installation and user guide for baseline cell modems in pedestal enclosures 4. Find the orange power connector on the wires coming from the transformer. Gently pull the connector away from the board to disconnect the power. Note: the illustration shows the black plastic dust cover removed from the c...
Page 10: Necessary
Installation and user guide for baseline cell modems in pedestal enclosures 11. Plug the other end of the ethernet cable into the ethernet jack on the back of the display board. 12. Reconnect the orange power connector to the board in order to restore power to the controller. 13. Reposition the blac...
Page 11
Installation and user guide for baseline cell modems in pedestal enclosures to update the basestation 1000 firmware from the baseline web site you will need a computer with a usb port. This computer must have access to the internet. You also need a usb (thumb) drive. You download the firmware from t...
Page 12: Controller
Installation and user guide for baseline cell modems in pedestal enclosures 4. Click the basestation 3200 v12 tab. 5. Click the printable instructions link on the web page to display the instructions in a format that is suitable for printing. Step 6 – activate your sim card with baseline 1. Fill out...
Page 13
Installation and user guide for baseline cell modems in pedestal enclosures 3. Press the button to highlight the cell modem info option, and then press the ok button to select it. The cell modem info screen displays the following information: cell modem: identifies the baseline part number for the...
Page 14
Installation and user guide for baseline cell modems in pedestal enclosures 4. Press the back button to return to the network setup menu and then press the or button to move to the basemanager setup option, and then press the ok button to select it. The basemanager setup screen displays. 5. Veri...
Page 15
Installation and user guide for baseline cell modems in pedestal enclosures basestation 3200 v12 instructions 1. On the basestation 3200 v12, turn the dial to the network position. 2. Press the next button to highlight basemanager server setup, and then press enter. The basemanager settings screen d...
Page 16
Installation and user guide for baseline cell modems in pedestal enclosures network: this field shows the status of the network connection. Ip: this field shows the ip address assigned to the cell modem. Uptime: this field shows the number of minutes that the modem has been connected. 5. Press the b...