1. DL manuals
  2. Basement Systems
  3. Dehumidifier
  4. SD109 SaniDry XP
  5. Installers And Users Instructions

Basement Systems SD109 SaniDry XP Installers And Users Instructions

Manual is about: Basement Air System

Summary of SD109 SaniDry XP

  • Page 2: Table of Contents

    Table of contents 1. Specifications ................................................................................... 2 2. Installation ........................................................................................ 3 2.1 location .............................................................

  • Page 3: Caution!

    Caution! — this symbol means important instructions. Failure to heed them can result in injury or material property damage. 2. Installation 2.1 location the sanidry xp is designed to be installed indoors and is ideal for unfinished and finished basements. Caution! • installation outdoors, or near a ...

  • Page 4

    Controller to excessively low levels in cool rooms. Doing so will result in long periods of ineffective dehumidifier run time. An ideal setting is 55%, which prevents mold growth. 3.2 on/off: pressing the on/off button once will power up the control system and illuminate the red run led. The unit wi...

  • Page 5: Caution!

    8. Protection functions and troubleshooting caution! Electric shock hazard: maintenance and repairs should be performed by a qualified service person. 8.1 defrost protection 8.2 defrost conditions 8.3 coil sensor operating properly: while the compressor is running in the auto dehumidify mode, the co...

  • Page 6: Caution!

    12. Service caution! Servicing the sanidry xp with its high-pressure refrigerant system and high-voltage circuitry presents a health hazard which could result in death, serious bodily injury, and/or property damage. Only qualified service people should service this unit. 12.1 warranty a warranty cer...

  • Page 7

    Sanidry xp service parts list • to order, contact your local basement systems dealer no description qty specifications 1 wheel 4 2 plate, bottom 1 galvanized steel (1.5mm) 3 bracket 4 galvanized steel (1.0mm) 4 grommet, rubber – compressor 3 buna n 5 washer, plate 3 6mm dia. Steel 6 nut 3 m6 steel 7...

  • Page 8: Exploded

    Sanidry xp service parts list • to order, contact your local basement systems dealer 8 sanidry xp installer’s & owner’s manual exploded view.

  • Page 9

    Sanidry xp condensate pump installation instructions step 1: the condensate pump kit includes: 25' drain hose, drain hose clamp, condensate pump, two mounting screws and instructions. Step 4: pull discharge hose out of unit until it stops. Cut the condensate drain hose at a 45° angle approximately 1...

  • Page 10

    Ductable inlet exhaust collar sanidry xp ductable inlet mounting ductable inlet instructions 1. Remove the filters from the unit. 2. Remove the ductable inlet from the box and remove the release paper from the tape on the inlet flanges. 3. Center the inlet above the filter guides and attach the inle...

  • Page 11

    Sanidry xp limited warranty 11 sanidry xp installer’s & owner’s manual limited warranty. Basement systems, inc. ("bsi") warrants as follows: (i) the sanidry xp dehumidifier (“product”) will be free of material defects in workmanship or materials for a period of thirty months following the date of ma...