BassBoss DV8 Owner's Manual - Owner’S Manual
DV8 Full Range Attuned Top
Owner’s Manual
BASSBOSS
DV8 Full Range Attuned Top
OWNER’S MANUAL
4
Page
Performance
Loudspeaker Description:
Wide dispersion compact full-range speaker
Frequency Response (±3 dB):
45 - 19,000 Hz
Maximum Sustained Output:
117dB SPL, 1m, 2pi, half-space
Short-term peak output:
123 dB
Nominal Dispersion (°H x °V):
120 x 15
Enclosure Type:
2-way full-range. Direct radiating Vented LF section, horn-loaded HF section
Transducers, LF:
2 x 8 inch diameter (200 mm) neodymium motor woofers with 2 inch (51mm) diameter copper winding voice coil
Transducer, HF:
1 x 1.7 inch (44mm) diaphragm neodymium motor compression driver on 1 inch throat isophasic wave guide
Cabinet Construction:
15 mm Baltic Birch plywood. Equipped with 6 handles. Includes 4 internally braced fly points and a 35mm pole socket mount
Suspension Points:
8 x 3/8 inch - 16 TPI internally braced threaded mounting points
Dimensions (HxWxD):
22.5 inches (57cm) high x 18 inches (45.75cm) deep x 10.75 inches (27.3cm) wide front and 8.5 inches (21.5cm) wide rearNet
Weight:
42 lbs (19 kg)
Shipping Weight:
48 lbs (21.7kg)
Exterior Finish:
Weatherproof bonded high-pressure polyurethane
Grill:
Perforated, powder coated steel
Physical
Stacking Bracket:
Adjustable bracket set, mounts second cabinet inverted for near-perfect summed response, provides splay-angle adjustment
from 0 to 8 degrees
Shoulder Eye Bolts:
For use when flying cabinets vertically
Side-pull Anchors
For use when flying 2 cabinets connected by Stacking Bracket
Cover:
Heavy-duty padded nylon transport cover
Online Information:
http://www.bassboss.com/monitors/dv8-powered-micromain/
Amplification:
1500 Watt two channel Powersoft Class D
DSP:
Integrated comprehensive DSP for High-pass, Low-pass, time alignment, EQ and limiting
Electrical Connectors, Amplifier:
Neutrik PowerCON in and through
Electrical Connector, Mains:
NEMA5-15 (Edison) or PowerCON loop-through jumper (for use above subwoofer) on request
Voltage Operating Range:
90-250V. Auto-sensing, auto switching universal supply
Current Draw, Nominal:
3A @ 1/8 power
Controls:
Level control from +12dB to -12dB, preset selector button
Display:
LEDs for Power/ready, Signal, Clip and Protect. LED indicating selected preset
Signal Input Connector:
XLR-F
Signal Output Connector:
XLR-M pass-through