BassBoss ZV28 Owner's Manual - page 4
Page 4
Performance
Frequency Response (±3 dB):
24-90Hz (Pair: 21-90Hz)
Maximum Sustained Output:
134dB SPL 1m 2pi, (half space) ground plane
Short-term Peak Output:
140 dB
Nominal Dispersion (°H x °V):
360 x 360. Cardioid Mode Available with Multiple Boxes.
Enclosure Type:
Helmholz resonator enclosure, optimally tuned for extremely low frequency response
with good sensitivity and high power handling
Transducer:
2 x 18 " diameter (457 mm) woofer with 4.5" (115mm) copper winding voice coil and
56mm peak to peak excursion with waterproof fiber composite cone
Cabinet Construction:
18mm Baltic Birch plywood. Equipped with 8 handles and interlocking rubber feet
Dimensions(HxWxD):
42" x 42" x 22.5" (23.25" high with feet)
Net Weight:
225 lbs
Shipping Weight:
240 lbs
Exterior Finish:
Weatherproof bonded high-pressure polyurethane
Grill:
Perforated, powder-coated steel
Physical
Suspension System:
16x 3/8-16 threaded flypoints
Cover:
Heavy-duty padded nylon transport covers for 1 to 3 cabinets
Transport Dollies:
Dolly cart with 4 locking casters and recesses to accept interlocking cabinet feet for transporting 1 to 3 cabinets
Compatible Top Boxes:
BASSBOSS BOSSMon Monitors and Attuned Tops
Online Information:
http://www.bassboss.com/zv28
Amplification:
4000W Continuous RMS Class D Amplifier
Processing:
Integrated Comprehensive DSP included for plug-and-play operation. No external processing required.
Electrical Connectors:
Neutrik Powercon
Voltage Operating Range:
90-130V
Current Draw, Nominal:
4.7A @ 120 volts, (typical, 1/8 max power)
Signal Input Connector:
XLR-F
Signal Output Connector:
XLR-M pass-through only
Power
Optional
Response Graph