BatteryMINDer DS24041-AA-S5 Operator Instructions Manual - page 4
P/N 752-648 Rev. 20121017 IR
Page
4 of 12
Included Items with GPU BatteryMINDer Option
The following additional items are included with your GPU when equipped with the BatteryMINDer
option:
• This instruction manual.
• 8 ft. output cable, 4-pin circular connector to red SB50 with imbedded ambient temp sensor –
Connects to mating plug on Model BM-AIK1 airframe battery harness below.
• Airframe Interface Kit (Model BM-AIK1) – Provides aviation-grade parts kit to install a fuse-
protected battery charger harness on FAA certified aircraft to connect your BattteryMINDer. Just
hand the kit to your licensed mechanic to install as a minor alteration, and return your aircraft to
service with a simple log entry.
Controls, Indicators, and Connections
An overview of the indicators is provided here. See page 6 for details.
Output Receptacle
Connect twist-on, 4-pin
charger output cable here.
Power-Status indicator
GREEN
= Charger ON, ready
RED
= Battery error or short
Battery Condition indicator
GREEN
= Good, OK to charge
YELLOW
= Weak, sulfated
OFF = Dead battery, not charging
Charge Mode indicator
GREEN
= Charging
FLASHING
= Desulfate-Condition
OFF = not charging
Stop-Start-Reset Switch
Press to stop or restart charger.
Hold for 5 seconds to reset.